[Tue Jul  3 10:26:39 2012] Detection parameters:
  Position = (149.6, 435.9) = 12 19 8.24 47 17 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.1 +/- 19.4
  Background counts = 61.4
  Rate = 0.002 +/- 0.0004

[Tue Jul  3 10:26:39 2012] Off-axis axis estimate = 14.69'
[Tue Jul  3 14:01:25 2012] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 14:01:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 14:01:25 2012] Initial guess for spatial extent in simple fitting = 13.77"
[Tue Jul  3 14:01:25 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.042
[Tue Jul  3 14:01:25 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 13.77"
[Tue Jul  3 14:58:12 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src31.ximg exists
[Tue Jul  3 14:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src31.csv
[Tue Jul  3 14:58:12 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Jul  3 14:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src31.csv
[Tue Jul  3 14:58:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 14:58:12 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Jul  3 14:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Jul  3 14:58:12 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Jul  3 14:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Jul  3 14:58:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 14:58:29 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 17.056098 pixels away
[Tue Jul  3 14:58:29 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 14:58:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 14:58:29 2012] Assessing source extent using major
[Tue Jul  3 14:58:29 2012] Source does appear to be extended
[Tue Jul  3 14:58:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 14:58:29 2012] Source is confused with source 4
[Tue Jul  3 19:02:36 2012] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 19:02:36 2012] Initial guess for spatial extent in simple fitting = 13.77"
[Tue Jul  3 19:02:36 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.042
[Tue Jul  3 19:02:36 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 13.77"
[Tue Jul  3 20:01:02 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_src30.ximg exists
[Tue Jul  3 20:01:02 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Jul  3 20:01:02 2012] Fit fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_src30 appears to have run properly
[Tue Jul  3 20:01:02 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Jul  3 20:01:02 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Jul  3 20:01:02 2012] Fit fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Jul  3 20:01:18 2012] Spatial fit model total counts = 5141.160000, observed total counts = 4916.000000
[Tue Jul  3 20:01:18 2012] Offset between fit and detection position for source 8 = 7.731922 pixels
[Tue Jul  3 20:01:18 2012] Warning, changing simple spatial fit ID from 30 to 8
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 7.731922 pixels
  Position = (155.6, 431.1) = 12 19 5.65 47 16 43.4
  Extent = 38.2 (38.2-38.2)", rotation angle = 0
  Source counts = 5144.4 +/- 71.7
  Background counts = 0.0
  Rate = 0.1 +/- 0.002
[Tue Jul  3 20:01:18 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 20:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 20:01:18 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 20:01:18 2012] Source does appear to be extended
[Tue Jul  3 20:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 22:11:50 2012] Counts = 5144.400000, rescaling region sizes by 2.000000
[Tue Jul  3 22:11:50 2012] XMMSAS src. selection expression = ellipse(13493.040000, 37454.478000, 4589.196132, 4589.196132, 0.000000, X, Y)
[Tue Jul  3 22:11:50 2012] Writing source region out to fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src8_src.reg
[Tue Jul  3 22:11:50 2012] Extracting stamp from image fullrun_mos2_xmm0203270201_pi300-10000_cl_sm2.00.img.gz, (0, 167) - (419, 595)
[Tue Jul  3 22:11:50 2012] XMMSAS bgd. selection expression = annulus(13493.040000, 37454.478000, 15297.320440, 30594.640880, X, Y) && !ellipse(15109.152120, 39279.113200, 463.444013, 463.444013, 0.000000, X, Y) && !ellipse(35934.488129, 32056.770050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.703800, 36835.707800, 629.744818, 629.744818, 0.000000, X, Y) && !ellipse(30439.318237, 16732.043167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32397.710327, 15513.978119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15372.684000, 39749.038000, 2188.232063, 2188.232063, 0.000000, X, Y) && !ellipse(17903.854950, 38407.669159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14415.154800, 38390.356000, 2154.216062, 910.184026, 316.759000, X, Y) && !ellipse(28321.585460, 31860.026200, 401.359212, 401.359212, 0.000000, X, Y) && !ellipse(15029.663800, 36736.043460, 383.742411, 383.742411, 0.000000, X, Y) && !ellipse(18761.673676, 25093.058319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16655.578000, 40862.940000, 2188.232063, 2188.232063, 0.000000, X, Y) && !ellipse(38997.402064, 35647.853199, 552.686338, 240.902465, 55.183038, X, Y) && !ellipse(25899.839200, 27944.915400, 496.767214, 496.767214, 0.000000, X, Y) && !ellipse(27922.000000, 26397.962738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26123.570000, 22778.876000, 256.350407, 256.350407, 0.000000, X, Y) && !ellipse(28363.963400, 20085.127800, 429.565612, 429.565612, 0.000000, X, Y) && !ellipse(32663.977905, 36038.448456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18001.587906, 33505.338104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13475.020000, 38062.622200, 2110.080061, 2110.080061, 0.000000, X, Y) && !ellipse(27933.636400, 25050.728600, 532.836815, 341.135210, 338.517839, X, Y) && !ellipse(9822.300880, 29234.572144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15654.741135, 37561.798065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22110.505936, 22308.354736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.237030, 31720.563690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12635.080734, 24048.293671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27459.725960, 19365.221200, 479.034414, 479.034414, 0.000000, X, Y) && !ellipse(31750.921295, 17625.046341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32941.308990, 19617.969742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18849.535233, 40570.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21315.001600, 13671.409800, 601.700017, 601.700017, 0.000000, X, Y) && !ellipse(25640.549255, 22082.633438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30517.950200, 27699.716560, 336.373610, 336.373610, 0.000000, X, Y) && !ellipse(12268.981400, 25894.032867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29560.530090, 38354.571228, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 22:11:50 2012] Writing fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src8.gif
[Tue Jul  3 22:24:06 2012] Mean detx,y = (3654.36, 14644.18) 
[Tue Jul  3 22:24:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 22:29:14 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 22:29:15 2012] Setting source spectrum file to fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jul  3 22:29:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Jul  3 23:20:10 2012] Updating aperture counts using extracted products
[Tue Jul  3 23:20:10 2012] Error reading totcts from fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jul  3 23:20:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 23:20:11 2012] Using photon index=1.80, rate=0.117, arf fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src8.arf
[Tue Jul  3 23:20:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 23:20:11 2012] Updating source flux to 2.9e-12
[Tue Jul  3 23:22:06 2012] Flag c found in src. 8 procflags, skipping spectral fitting