[Tue Jul  3 10:26:39 2012] Detection parameters:
  Position = (186.4, 464.0) = 12 18 52.55 47 19 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.1 +/- 27.1
  Background counts = 66.7
  Rate = 0.006 +/- 0.0006

[Tue Jul  3 10:26:39 2012] Off-axis axis estimate = 14.50'
[Tue Jul  3 14:01:25 2012] Using EEF radius (= 13.68 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 14:01:25 2012] Initial guess for spatial extent in simple fitting = 13.68"
[Tue Jul  3 14:01:25 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.054
[Tue Jul  3 14:01:25 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.68"
[Tue Jul  3 14:58:12 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src12.ximg exists
[Tue Jul  3 14:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src12.csv
[Tue Jul  3 14:58:12 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Jul  3 14:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src12.csv
[Tue Jul  3 14:58:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 14:58:12 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Jul  3 14:58:12 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Jul  3 14:58:12 2012] Fit fullrun_mos2_xmm0203270201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Jul  3 14:58:29 2012] Warning, spatial fit 12 centroid is now closest to src. 7
[Tue Jul  3 14:58:29 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 14:58:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 14:58:29 2012] Assessing source extent using major
[Tue Jul  3 14:58:29 2012] Source does appear to be extended
[Tue Jul  3 14:58:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 14:58:29 2012] Source is confused with source 7
[Tue Jul  3 19:02:36 2012] Using EEF radius (= 13.68 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 19:02:36 2012] Initial guess for spatial extent in simple fitting = 13.68"
[Tue Jul  3 19:02:36 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.054
[Tue Jul  3 19:02:36 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 13.68"
[Tue Jul  3 20:01:01 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jul  3 20:01:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_src12.csv
[Tue Jul  3 20:01:01 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jul  3 20:01:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_src12.csv
[Tue Jul  3 20:01:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 20:01:02 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jul  3 20:01:02 2012] fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jul  3 20:01:02 2012] Fit fullrun_mos2_xmm0203270201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jul  3 20:01:18 2012] Spatial fit model total counts = 2045.870000, observed total counts = 2016.000000
[Tue Jul  3 20:01:18 2012] Offset between fit and detection position for source 16 = 8.385244 pixels
[Tue Jul  3 20:01:18 2012] 1797.746000 total counts/ 292.266000 bgd. counts: snr = 88.061452
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 8.385244 pixels
  Position = (192.0, 470.2) = 12 18 50.16 47 19 34.3
  Extent = 27.4 (27.3-54.7)", rotation angle = 0
  Source counts = 1505.5 +/- 42.4
  Background counts = 292.3
  Rate = 0.03 +/- 0.001
[Tue Jul  3 20:01:18 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 20:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 20:01:18 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 20:01:18 2012] Source does appear to be extended
[Tue Jul  3 20:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 22:11:50 2012] Counts = 1505.480000, rescaling region sizes by 2.000000
[Tue Jul  3 22:11:50 2012] XMMSAS src. selection expression = ellipse(16655.578000, 40862.940000, 3282.348094, 3282.348094, 0.000000, X, Y)
[Tue Jul  3 22:11:50 2012] Writing source region out to fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src16_src.reg
[Tue Jul  3 22:11:50 2012] Extracting stamp from image fullrun_mos2_xmm0203270201_pi300-10000_cl_sm2.00.img.gz, (3, 282) - (381, 595)
[Tue Jul  3 22:11:50 2012] XMMSAS bgd. selection expression = annulus(16655.578000, 40862.940000, 10941.160315, 21882.320630, X, Y) && !ellipse(15109.152120, 39279.113200, 463.444013, 463.444013, 0.000000, X, Y) && !ellipse(35934.488129, 32056.770050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.703800, 36835.707800, 629.744818, 629.744818, 0.000000, X, Y) && !ellipse(15372.684000, 39749.038000, 2188.232063, 2188.232063, 0.000000, X, Y) && !ellipse(17903.854950, 38407.669159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14415.154800, 38390.356000, 2154.216062, 910.184026, 316.759000, X, Y) && !ellipse(28321.585460, 31860.026200, 401.359212, 401.359212, 0.000000, X, Y) && !ellipse(15029.663800, 36736.043460, 383.742411, 383.742411, 0.000000, X, Y) && !ellipse(18761.673676, 25093.058319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38997.402064, 35647.853199, 552.686338, 240.902465, 55.183038, X, Y) && !ellipse(25899.839200, 27944.915400, 496.767214, 496.767214, 0.000000, X, Y) && !ellipse(27922.000000, 26397.962738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26123.570000, 22778.876000, 256.350407, 256.350407, 0.000000, X, Y) && !ellipse(28363.963400, 20085.127800, 429.565612, 429.565612, 0.000000, X, Y) && !ellipse(32663.977905, 36038.448456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18001.587906, 33505.338104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13475.020000, 38062.622200, 2110.080061, 2110.080061, 0.000000, X, Y) && !ellipse(27933.636400, 25050.728600, 532.836815, 341.135210, 338.517839, X, Y) && !ellipse(9822.300880, 29234.572144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15654.741135, 37561.798065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22110.505936, 22308.354736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.237030, 31720.563690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12635.080734, 24048.293671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27459.725960, 19365.221200, 479.034414, 479.034414, 0.000000, X, Y) && !ellipse(32941.308990, 19617.969742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18849.535233, 40570.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13493.040000, 37454.478000, 3059.464088, 3059.464088, 0.000000, X, Y) && !ellipse(25640.549255, 22082.633438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30517.950200, 27699.716560, 336.373610, 336.373610, 0.000000, X, Y) && !ellipse(12268.981400, 25894.032867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29560.530090, 38354.571228, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 22:11:50 2012] Writing fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src16.gif
[Tue Jul  3 22:17:31 2012] Mean detx,y = (2036.74, 15209.86) 
[Tue Jul  3 22:17:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 22:21:01 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 22:21:01 2012] Setting source spectrum file to fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul  3 22:21:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jul  3 23:20:10 2012] Updating aperture counts using extracted products
[Tue Jul  3 23:20:10 2012] Error reading totcts from fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul  3 23:20:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 23:20:10 2012] Using photon index=1.80, rate=0.0342, arf fullrun_mos2_xmm0203270201_pi300-10000_pass1_cl_src16.arf
[Tue Jul  3 23:20:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 23:20:10 2012] Updating source flux to 8.9e-13
[Tue Jul  3 23:22:06 2012] Flag c found in src. 16 procflags, skipping spectral fitting