[Tue Mar 6 10:22:19 2012] Detection parameters: Position = (262.0, 232.9) = 0 55 55.83 26 20 41.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 154.5 +/- 26.1 Background counts = 225.8 Rate = 0.006 +/- 0.0009 [Tue Mar 6 10:22:19 2012] Off-axis axis estimate = 5.43' [Tue Mar 6 10:27:03 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 10:27:03 2012] Initial guess for spatial extent in simple fitting = 9.15" [Tue Mar 6 10:27:03 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.329 [Tue Mar 6 10:27:03 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 9.15" [Tue Mar 6 14:48:36 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src66.ximg exists [Tue Mar 6 14:48:36 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src66_1.ximg exists [Tue Mar 6 14:48:36 2012] Fit fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src66 appears to have run properly [Tue Mar 6 14:48:39 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists [Tue Mar 6 14:48:39 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists [Tue Mar 6 14:48:39 2012] Fit fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly [Tue Mar 6 22:08:06 2012] Spatial fit model total counts = 3305.040000, observed total counts = 3308.000000 [Tue Mar 6 22:08:06 2012] Offset between fit and detection position for source 69 = 8.589573 pixels [Tue Mar 6 22:08:06 2012] 3077.159000 total counts/ 2525.190000 bgd. counts: snr = 10.984180 Spatial fit parameters: Offset between fit and detection position for source 69 = 8.589573 pixels Position = (266.5, 240.2) = 0 55 54.38 26 21 11.8 Extent = 18.3 (18.3-36.6)", rotation angle = 0 Source counts = 552.0 +/- 55.5 Background counts = 2525.2 Rate = 0.02 +/- 0.002 [Tue Mar 6 22:08:06 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 22:08:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 22:08:06 2012] Assessing source extent using major axis lower bound [Tue Mar 6 22:08:06 2012] Source does appear to be extended [Tue Mar 6 22:08:06 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Mar 6 22:09:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Mar 6 22:09:10 2012] Initial guess for spatial extent in simple fitting = 18.29" [Tue Mar 6 22:09:10 2012] source mask rpix=4.2, npix_max = 88, mask sum = 81, frac = 0.915 [Tue Mar 6 22:09:10 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 18.29" [Wed Mar 7 01:58:43 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src50.ximg exists [Wed Mar 7 01:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src50.csv [Wed Mar 7 01:58:43 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src50_1.ximg exists [Wed Mar 7 01:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src50.csv [Wed Mar 7 01:58:43 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src50_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 01:58:44 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists [Wed Mar 7 01:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src50.csv [Wed Mar 7 01:58:44 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists [Wed Mar 7 01:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src50.csv [Wed Mar 7 01:58:44 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 07:55:07 2012] Source 69 is offset by -4.088828 and -0.339517 pixels which is larger than 2 X fitted extent = 2.260299 x 2.260299, not incorporating fit results [Wed Mar 7 07:55:07 2012] Warning, spatial fit 50 centroid is now closest to src. 63 [Wed Mar 7 07:55:07 2012] Vigneting correction estimate = 1.000000 [Wed Mar 7 07:55:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 7 07:55:07 2012] Assessing source extent using major axis lower bound [Wed Mar 7 07:55:07 2012] Source does appear to be extended [Wed Mar 7 07:55:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 07:55:47 2012] XMMSAS src. selection expression = ellipse(23136.440000, 20852.630000, 1097.526032, 1097.526032, 0.000000, X, Y) [Wed Mar 7 07:55:47 2012] Writing source region out to fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src69_src.reg [Wed Mar 7 07:55:47 2012] Extracting stamp from image fullrun_pn_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (203, 177) - (330, 303) [Wed Mar 7 07:55:47 2012] XMMSAS bgd. selection expression = annulus(23136.440000, 20852.630000, 1829.210053, 3658.420105, X, Y) && !ellipse(24262.758000, 24897.618000, 3154.680091, 2850.168082, 109.392800, X, Y) && !ellipse(23170.501160, 24840.336700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24098.672000, 25555.750000, 1165.496034, 1165.496034, 0.000000, X, Y) && !ellipse(22252.332000, 19257.978800, 1535.760044, 1535.760044, 0.000000, X, Y) && !ellipse(21945.712000, 19291.664000, 1573.168045, 1573.168045, 0.000000, X, Y) && !ellipse(20962.000000, 24463.134033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22220.766000, 24426.228000, 1338.928039, 1338.928039, 0.000000, X, Y) && !ellipse(21679.637161, 23980.696625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25846.904000, 23673.780000, 1156.808033, 1156.808033, 0.000000, X, Y) && !ellipse(20983.122086, 23796.705750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23428.283264, 23694.848206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24643.139709, 23258.255188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22566.444824, 23966.874542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20532.490000, 23523.748000, 1158.648033, 1158.648033, 0.000000, X, Y) && !ellipse(24007.584106, 23497.911407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27085.501160, 23073.151855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21159.333600, 23029.504400, 579.322417, 579.322417, 0.000000, X, Y) && !ellipse(21896.140200, 22788.131800, 380.400811, 380.400811, 0.000000, X, Y) && !ellipse(20801.425156, 21071.778824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20384.997086, 20389.746933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.222031, 20329.603882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19601.772000, 20189.827400, 1580.184045, 1580.184045, 0.000000, X, Y) && !ellipse(21026.571640, 19800.384857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20691.935730, 18860.278809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22839.570343, 17703.969742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21032.690155, 17970.306351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22835.813420, 17261.758000, 562.086416, 562.086416, 0.000000, X, Y) && !ellipse(21567.742279, 16838.620026, 870.000000, 870.000000, 0.000000, X, Y) [Wed Mar 7 07:55:47 2012] Writing fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src69.gif [Wed Mar 7 08:53:02 2012] Mean detx,y = (-541.06, -4351.37) [Wed Mar 7 08:53:04 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 7 08:53:30 2012] Binned source spectrum to 10 counts/bin [Wed Mar 7 08:53:30 2012] Setting source spectrum file to fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src69_src_b10.pi.gz [Wed Mar 7 08:53:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src69_bgd.pi.gz [Wed Mar 7 21:12:27 2012] Updating aperture counts using extracted products [Wed Mar 7 21:12:27 2012] Error reading totcts from fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src69_src_b10.pi.gz [Wed Mar 7 21:12:31 2012] Calculating source flux in energy range 0.30-8.00 [Wed Mar 7 21:12:31 2012] Using photon index=1.80, rate=0.0152, arf fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src69.arf [Wed Mar 7 21:12:31 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Mar 7 21:12:31 2012] Updating source flux to 4.7e-14 [Wed Mar 7 21:20:29 2012] Flag b found in src. 69 procflags, skipping spectral fitting