[Tue Mar 6 10:22:17 2012] Detection parameters: Position = (275.0, 300.9) = 0 55 51.64 26 25 35.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1363.3 +/- 52.5 Background counts = 171.9 Rate = 0.04 +/- 0.001 [Tue Mar 6 10:22:19 2012] Off-axis axis estimate = 1.71' [Tue Mar 6 10:27:03 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 10:27:03 2012] Initial guess for spatial extent in simple fitting = 7.28" [Tue Mar 6 10:27:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846 [Tue Mar 6 10:27:03 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.28" [Tue Mar 6 14:48:35 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src4.ximg exists [Tue Mar 6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src4.csv [Tue Mar 6 14:48:35 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src4_1.ximg exists [Tue Mar 6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src4.csv [Tue Mar 6 14:48:35 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 14:48:37 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Tue Mar 6 14:48:37 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Tue Mar 6 14:48:37 2012] Fit fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Tue Mar 6 22:08:05 2012] Source 4 is offset by 0.918805 and 6.879438 pixels which is larger than 2 X fitted extent = 0.880106 x 0.880106, not incorporating fit results [Tue Mar 6 22:08:05 2012] Spatial fit model total counts = 7981.240000, observed total counts = 7964.000000 [Tue Mar 6 22:08:05 2012] Offset between fit and detection position for source 4 = 7.108759 pixels [Tue Mar 6 22:08:05 2012] 7740.317000 total counts/ 7136.870000 bgd. counts: snr = 7.143075 Spatial fit parameters: Offset between fit and detection position for source 4 = 7.108759 pixels Position = (277.6, 294.3) = 0 55 50.80 26 25 7.0 Extent = 14.6 (14.5-29.1)", rotation angle = 0 Source counts = 603.4 +/- 88.0 Background counts = 7136.9 Rate = 0.02 +/- 0.002 [Tue Mar 6 22:08:06 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 22:08:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 22:08:06 2012] Assessing source extent using major axis lower bound [Tue Mar 6 22:08:06 2012] Source does appear to be extended [Tue Mar 6 22:08:06 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Mar 6 22:08:06 2012] Source is confused with source 1 [Tue Mar 6 22:09:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Mar 6 22:09:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Mar 6 22:09:10 2012] Initial guess for spatial extent in simple fitting = 14.57" [Tue Mar 6 22:09:10 2012] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.945 [Tue Mar 6 22:09:10 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.57" [Wed Mar 7 01:58:42 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src4.ximg exists [Wed Mar 7 01:58:42 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src4_1.ximg exists [Wed Mar 7 01:58:42 2012] Fit fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src4 appears to have run properly [Wed Mar 7 01:58:43 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Wed Mar 7 01:58:43 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Wed Mar 7 01:58:43 2012] Fit fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Wed Mar 7 07:55:07 2012] Warning, spatial fit 4 centroid is now closest to src. 1 [Wed Mar 7 07:55:07 2012] Vigneting correction estimate = 1.000000 [Wed Mar 7 07:55:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 7 07:55:07 2012] Assessing source extent using major axis lower bound [Wed Mar 7 07:55:07 2012] Source does appear to be extended [Wed Mar 7 07:55:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 07:55:46 2012] XMMSAS src. selection expression = ellipse(24098.672000, 25555.750000, 874.122025, 874.122025, 0.000000, X, Y) [Wed Mar 7 07:55:46 2012] Writing source region out to fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src4_src.reg [Wed Mar 7 07:55:46 2012] Extracting stamp from image fullrun_pn_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (227, 244) - (328, 345) [Wed Mar 7 07:55:46 2012] XMMSAS bgd. selection expression = annulus(24098.672000, 25555.750000, 1456.870042, 2913.740084, X, Y) && !ellipse(24262.758000, 24897.618000, 3154.680091, 2850.168082, 109.392800, X, Y) && !ellipse(23170.501160, 24840.336700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21087.314728, 28329.005371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26102.156000, 27987.800000, 2294.864066, 2294.864066, 0.000000, X, Y) && !ellipse(25477.784000, 27358.434000, 1147.432033, 1147.432033, 0.000000, X, Y) && !ellipse(23168.908000, 26817.116000, 1252.768036, 1252.768036, 0.000000, X, Y) && !ellipse(23822.592400, 27187.872000, 1177.864034, 1177.864034, 0.000000, X, Y) && !ellipse(25541.375946, 26840.056976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22219.871902, 26125.734619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20962.000000, 24463.134033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22220.766000, 24426.228000, 1338.928039, 1338.928039, 0.000000, X, Y) && !ellipse(21679.637161, 23980.696625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25846.904000, 23673.780000, 1156.808033, 1156.808033, 0.000000, X, Y) && !ellipse(20983.122086, 23796.705750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23428.283264, 23694.848206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24643.139709, 23258.255188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22566.444824, 23966.874542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20532.490000, 23523.748000, 1158.648033, 1158.648033, 0.000000, X, Y) && !ellipse(24007.584106, 23497.911407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27085.501160, 23073.151855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21159.333600, 23029.504400, 579.322417, 579.322417, 0.000000, X, Y) && !ellipse(21896.140200, 22788.131800, 380.400811, 380.400811, 0.000000, X, Y) [Wed Mar 7 07:55:46 2012] Writing fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src4.gif [Wed Mar 7 08:16:31 2012] Mean detx,y = (299.33, 135.39) [Wed Mar 7 08:16:36 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 7 08:16:55 2012] Binned source spectrum to 10 counts/bin [Wed Mar 7 08:16:56 2012] Setting source spectrum file to fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Wed Mar 7 08:16:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src4_bgd.pi.gz [Wed Mar 7 21:12:24 2012] Updating aperture counts using extracted products [Wed Mar 7 21:12:24 2012] Error reading totcts from fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Wed Mar 7 21:12:28 2012] Calculating source flux in energy range 0.30-8.00 [Wed Mar 7 21:12:28 2012] Using photon index=1.80, rate=0.0167, arf fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src4.arf [Wed Mar 7 21:12:28 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Mar 7 21:12:28 2012] Updating source flux to 4e-14 [Wed Mar 7 21:20:29 2012] Flag b found in src. 4 procflags, skipping spectral fitting [Wed Mar 7 21:20:29 2012] Flag c found in src. 4 procflags, skipping spectral fitting