[Tue Mar 6 10:22:17 2012] Detection parameters: Position = (266.9, 286.1) = 0 55 54.25 26 24 30.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2001.3 +/- 61.4 Background counts = 222.7 Rate = 0.06 +/- 0.002 [Tue Mar 6 10:22:19 2012] Off-axis axis estimate = 2.46' [Tue Mar 6 10:27:03 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 10:27:03 2012] Initial guess for spatial extent in simple fitting = 7.66" [Tue Mar 6 10:27:03 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783 [Tue Mar 6 10:27:03 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.66" [Tue Mar 6 14:48:35 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src2.ximg exists [Tue Mar 6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src2.csv [Tue Mar 6 14:48:35 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src2_1.ximg exists [Tue Mar 6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src2.csv [Tue Mar 6 14:48:35 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 14:48:37 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Tue Mar 6 14:48:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2.csv [Tue Mar 6 14:48:37 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Tue Mar 6 14:48:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2.csv [Tue Mar 6 14:48:37 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 22:08:05 2012] Warning, spatial fit 2 centroid is now closest to src. 4 [Tue Mar 6 22:08:06 2012] Source 2 is offset by 1.949669 and -5.073831 pixels which is larger than 2 X fitted extent = 1.824749 x 1.708451, not incorporating fit results [Tue Mar 6 22:08:06 2012] Source 2 is offset by 1.588496 and 2.991020 pixels which is larger than 2 X fitted extent = 2.485972 x 2.485972, not incorporating fit results [Tue Mar 6 22:08:06 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 22:08:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 22:08:06 2012] Assessing source extent using major [Tue Mar 6 22:08:06 2012] Source does appear to be extended [Tue Mar 6 22:08:06 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Mar 6 22:09:10 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 22:09:10 2012] Initial guess for spatial extent in simple fitting = 7.66" [Tue Mar 6 22:09:10 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783 [Tue Mar 6 22:09:10 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.66" [Wed Mar 7 01:58:42 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src2.ximg exists [Wed Mar 7 01:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src2.csv [Wed Mar 7 01:58:42 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src2_1.ximg exists [Wed Mar 7 01:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src2.csv [Wed Mar 7 01:58:42 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 01:58:43 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Wed Mar 7 01:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src2.csv [Wed Mar 7 01:58:43 2012] fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Wed Mar 7 01:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src2.csv [Wed Mar 7 01:58:43 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 07:55:07 2012] Warning, spatial fit 2 centroid is now closest to src. 46 [Wed Mar 7 07:55:07 2012] Spatial fit model total counts = 9740.240000, observed total counts = 7863.000000 [Wed Mar 7 07:55:07 2012] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Wed Mar 7 07:55:07 2012] Source 2 is offset by 2.011145 and 1.797404 pixels which is larger than 2 X fitted extent = 1.494120 x 4.046182, not incorporating fit results [Wed Mar 7 07:55:07 2012] Vigneting correction estimate = 1.000000 [Wed Mar 7 07:55:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 7 07:55:07 2012] Assessing source extent using major [Wed Mar 7 07:55:07 2012] Source does appear to be extended [Wed Mar 7 07:55:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 07:55:46 2012] Counts = 2001.281372, rescaling region sizes by 2.000000 [Wed Mar 7 07:55:46 2012] XMMSAS src. selection expression = ellipse(23170.501160, 24840.336700, 1305.000000, 1305.000000, 0.000000, X, Y) [Wed Mar 7 07:55:46 2012] Writing source region out to fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src2_src.reg [Wed Mar 7 07:55:46 2012] Extracting stamp from image fullrun_pn_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (192, 211) - (342, 361) [Wed Mar 7 07:55:46 2012] XMMSAS bgd. selection expression = annulus(23170.501160, 24840.336700, 4350.000000, 8700.000000, X, Y) && !ellipse(24262.758000, 24897.618000, 3154.680091, 2850.168082, 109.392800, X, Y) && !ellipse(24098.672000, 25555.750000, 1165.496034, 1165.496034, 0.000000, X, Y) && !ellipse(22252.332000, 19257.978800, 1535.760044, 1535.760044, 0.000000, X, Y) && !ellipse(21945.712000, 19291.664000, 1573.168045, 1573.168045, 0.000000, X, Y) && !ellipse(19291.456894, 33779.013214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24974.251068, 33536.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32648.541565, 33251.262421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.838531, 32677.677856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18394.542862, 32190.663177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19475.058807, 29984.009918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32313.089233, 29859.268677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16263.881851, 29283.637085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21087.314728, 28329.005371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26102.156000, 27987.800000, 2294.864066, 2294.864066, 0.000000, X, Y) && !ellipse(25477.784000, 27358.434000, 1147.432033, 1147.432033, 0.000000, X, Y) && !ellipse(23168.908000, 26817.116000, 1252.768036, 1252.768036, 0.000000, X, Y) && !ellipse(23822.592400, 27187.872000, 1177.864034, 1177.864034, 0.000000, X, Y) && !ellipse(18361.682892, 26980.845215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25541.375946, 26840.056976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22219.871902, 26125.734619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29439.176666, 25247.148254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20962.000000, 24463.134033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22220.766000, 24426.228000, 1338.928039, 1338.928039, 0.000000, X, Y) && !ellipse(21679.637161, 23980.696625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25846.904000, 23673.780000, 1156.808033, 1156.808033, 0.000000, X, Y) && !ellipse(20983.122086, 23796.705750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23428.283264, 23694.848206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24643.139709, 23258.255188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22566.444824, 23966.874542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20532.490000, 23523.748000, 1158.648033, 1158.648033, 0.000000, X, Y) && !ellipse(24007.584106, 23497.911407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27085.501160, 23073.151855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21159.333600, 23029.504400, 579.322417, 579.322417, 0.000000, X, Y) && !ellipse(21896.140200, 22788.131800, 380.400811, 380.400811, 0.000000, X, Y) && !ellipse(20801.425156, 21071.778824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20384.997086, 20389.746933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.440000, 20852.630000, 1463.368042, 1463.368042, 0.000000, X, Y) && !ellipse(21243.222031, 20329.603882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19601.772000, 20189.827400, 1580.184045, 1580.184045, 0.000000, X, Y) && !ellipse(15909.019928, 20331.715958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21026.571640, 19800.384857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20691.935730, 18860.278809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16128.456772, 18928.086929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22839.570343, 17703.969742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21032.690155, 17970.306351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22835.813420, 17261.758000, 562.086416, 562.086416, 0.000000, X, Y) && !ellipse(13845.500626, 17361.782928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21567.742279, 16838.620026, 870.000000, 870.000000, 0.000000, X, Y) [Wed Mar 7 07:55:46 2012] Writing fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src2.gif [Wed Mar 7 08:10:25 2012] Mean detx,y = (619.52, -345.10) [Wed Mar 7 08:10:32 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 7 08:12:53 2012] Binned source spectrum to 10 counts/bin [Wed Mar 7 08:12:53 2012] Setting source spectrum file to fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Wed Mar 7 08:12:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src2_bgd.pi.gz [Wed Mar 7 09:03:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Mar 7 09:03:47 2012] rmf not generated due to insufficient counts [Wed Mar 7 21:12:24 2012] Updating aperture counts using extracted products [Wed Mar 7 21:12:24 2012] Error reading totcts from fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Wed Mar 7 21:12:28 2012] Calculating source flux in energy range 0.30-8.00 [Wed Mar 7 21:12:28 2012] Using photon index=1.80, rate=0.0597, arf fullrun_pn_xmm0203220101_pi300-10000_pass1_cl_src2.arf [Wed Mar 7 21:12:28 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Mar 7 21:12:28 2012] Updating source flux to 1.4e-13 [Wed Mar 7 21:20:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting