[Tue Mar  6 10:23:33 2012] Detection parameters:
  Position = (406.3, 323.1) = 0 55 9.11 26 27 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1848.9 +/- 51.1
  Background counts = 20.3
  Rate = 0.04 +/- 0.001

[Tue Mar  6 10:23:37 2012] Off-axis axis estimate = 8.02'
[Tue Mar  6 18:24:41 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 18:24:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 18:24:41 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Tue Mar  6 18:24:41 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.070
[Tue Mar  6 18:24:41 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.44"
[Tue Mar  6 22:07:37 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar  6 22:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src2.csv
[Tue Mar  6 22:07:37 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar  6 22:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src2.csv
[Tue Mar  6 22:07:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:07:39 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar  6 22:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar  6 22:07:39 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar  6 22:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar  6 22:07:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:08:45 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.007225 pixels away
[Tue Mar  6 22:08:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:45 2012] Assessing source extent using major
[Tue Mar  6 22:08:45 2012] Source does appear to be extended
[Tue Mar  6 22:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 04:56:58 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 04:56:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 04:56:58 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Wed Mar  7 04:56:58 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.070
[Wed Mar  7 04:56:58 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.44"
[Wed Mar  7 07:54:48 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Mar  7 07:54:48 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Mar  7 07:54:48 2012] Fit fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Mar  7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Mar  7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Mar  7 07:54:50 2012] Fit fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Mar  7 07:55:30 2012] Spatial fit model total counts = 1766.210000, observed total counts = 1725.000000
[Wed Mar  7 07:55:30 2012] Offset between fit and detection position for source 7 = 0.352614 pixels
[Wed Mar  7 07:55:30 2012] 1763.093000 total counts/ 488.633000 bgd. counts: snr = 57.654713
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.352614 pixels
  Position = (406.0, 323.4) = 0 55 9.19 26 27 13.2
  Extent = 7.0 (6.6-7.5)" x 4.3 (4.0-4.6)", rotation angle = 78 (73-82) degrees
  Source counts = 1274.5 +/- 42.0
  Background counts = 488.6
  Rate = 0.03 +/- 0.001
[Wed Mar  7 07:55:30 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:30 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 07:55:30 2012] Source does appear to be extended
[Wed Mar  7 07:55:30 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.44
[Wed Mar  7 19:46:37 2012] Counts = 1274.460000, rescaling region sizes by 2.000000
[Wed Mar  7 19:46:37 2012] XMMSAS src. selection expression = ellipse(35275.003574, 28085.451400, 845.889624, 518.208015, 78.016913, X, Y)
[Wed Mar  7 19:46:37 2012] Writing source region out to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src7_src.reg
[Wed Mar  7 19:46:37 2012] Extracting stamp from image fullrun_mos2_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (357, 275) - (455, 372)
[Wed Mar  7 19:46:37 2012] XMMSAS bgd. selection expression = annulus(35275.003574, 28085.451400, 2819.632081, 5639.264162, X, Y) && !ellipse(32270.357800, 29832.178800, 439.661613, 439.661613, 0.000000, X, Y) && !ellipse(34477.984192, 23265.580414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32586.360779, 33321.469360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.079800, 25238.638000, 538.109479, 538.109479, 0.000000, X, Y)
[Wed Mar  7 19:46:37 2012] Writing fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src7.gif
[Wed Mar  7 19:50:15 2012] Mean detx,y = (8778.04, -7522.85) 
[Wed Mar  7 19:50:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 19:51:49 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 19:51:49 2012] Setting source spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar  7 19:51:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Mar  7 21:12:38 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:38 2012] Error reading totcts from fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar  7 21:12:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:42 2012] Using photon index=1.80, rate=0.0301, arf fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src7.arf
[Wed Mar  7 21:12:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:42 2012] Updating source flux to 6.5e-13
[Wed Mar  7 21:20:29 2012] Reading fit data from xmm0203220101/analysis//spectral/fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src7_pl.csv
[Wed Mar  7 21:20:29 2012] Spectral fit parameter nH value = 4.70431e+20
[Wed Mar  7 21:20:29 2012] Spectral fit parameter PhoIndex value = 1.5088
[Wed Mar  7 21:20:29 2012] Failed to get F(0.3-8.0) from xmm0203220101/analysis//spectral/fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 21:20:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:20:29 2012] Using Nh = 4.7e+20, photon index=1.51, rate=0.0301, arf fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src7.arf
[Wed Mar  7 21:20:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:20:29 2012] Updating source flux to 7.8e-13