[Tue Mar  6 10:23:37 2012] Detection parameters:
  Position = (270.1, 214.9) = 0 55 53.21 26 19 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.5 +/- 16.8
  Background counts = 53.5
  Rate = 0.004 +/- 0.0006

[Tue Mar  6 10:23:37 2012] Off-axis axis estimate = 6.39'
[Tue Mar  6 18:24:41 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 18:24:41 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Tue Mar  6 18:24:41 2012] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.917
[Tue Mar  6 18:24:41 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 9.63"
[Tue Mar  6 22:07:37 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src22.ximg exists
[Tue Mar  6 22:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src22.csv
[Tue Mar  6 22:07:37 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue Mar  6 22:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src22.csv
[Tue Mar  6 22:07:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:07:39 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue Mar  6 22:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue Mar  6 22:07:39 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue Mar  6 22:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue Mar  6 22:07:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:08:45 2012] Warning, spatial fit 22 centroid is now closest to src. 8
[Tue Mar  6 22:08:45 2012] Spatial fit model total counts = 703.818000, observed total counts = 649.000000
[Tue Mar  6 22:08:45 2012] Offset between fit and detection position for source 65 = 2.909467 pixels
[Tue Mar  6 22:08:45 2012] Warning, changing simple spatial fit ID from 22 to 47
[Tue Mar  6 22:08:45 2012] 692.224000 total counts/ 434.037000 bgd. counts: snr = 12.392844
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 2.909467 pixels
  Position = (273.0, 214.9) = 0 55 52.27 26 19 21.5
  Extent = 19.4 (19.4-19.4)", rotation angle = 0
  Source counts = 258.2 +/- 26.3
  Background counts = 434.0
  Rate = 0.006 +/- 0.0006
[Tue Mar  6 22:08:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:45 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 22:08:45 2012] Source does appear to be extended
[Tue Mar  6 22:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 22:08:45 2012] Source is confused with source 64
[Tue Mar  6 22:08:45 2012] Source is confused with source 66
[Wed Mar  7 04:56:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 04:56:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 04:56:58 2012] Initial guess for spatial extent in simple fitting = 19.40"
[Wed Mar  7 04:56:58 2012] source mask rpix=4.5, npix_max = 98, mask sum = 84, frac = 0.854
[Wed Mar  7 04:56:58 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 19.40"
[Wed Mar  7 07:54:49 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src20.ximg exists
[Wed Mar  7 07:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src20.csv
[Wed Mar  7 07:54:49 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Mar  7 07:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src20.csv
[Wed Mar  7 07:54:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Mar  7 07:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Mar  7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Mar  7 07:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Mar  7 07:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 07:55:30 2012] Warning, spatial fit 20 centroid is now closest to src. 8
[Wed Mar  7 07:55:30 2012] Spatial fit model total counts = 709.817000, observed total counts = 649.000000
[Wed Mar  7 07:55:30 2012] Offset between fit and detection position for source 65 = 2.590785 pixels
[Wed Mar  7 07:55:30 2012] Warning, changing simple spatial fit ID from 20 to 43
[Wed Mar  7 07:55:30 2012] 491.947000 total counts/ 254.413000 bgd. counts: snr = 14.892106
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 2.590785 pixels
  Position = (271.5, 217.0) = 0 55 52.75 26 19 30.7
  Extent = 19.4 (19.3-38.8)", rotation angle = 0
  Source counts = 237.5 +/- 22.2
  Background counts = 254.4
  Rate = 0.006 +/- 0.0005
[Wed Mar  7 07:55:30 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:30 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 07:55:30 2012] Source does appear to be extended
[Wed Mar  7 07:55:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 19:46:38 2012] XMMSAS src. selection expression = ellipse(23573.248000, 18830.632000, 1163.808033, 1163.808033, 0.000000, X, Y)
[Wed Mar  7 19:46:38 2012] Writing source region out to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src65_src.reg
[Wed Mar  7 19:46:38 2012] Extracting stamp from image fullrun_mos2_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (205, 150) - (338, 284)
[Wed Mar  7 19:46:38 2012] XMMSAS bgd. selection expression = annulus(23573.248000, 18830.632000, 1939.680056, 3879.360112, X, Y) && !ellipse(21563.048187, 19763.887497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22568.393616, 18999.635986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22333.681061, 18220.248154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22479.805908, 20054.781799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21415.879913, 17892.030777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21103.129410, 20413.263855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20869.023529, 18752.581528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21610.640915, 18543.179367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21765.988000, 16753.364600, 1010.984029, 1010.984029, 0.000000, X, Y) && !ellipse(21877.716949, 17664.405823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22778.918854, 17305.615784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21556.206177, 20904.632782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21034.766000, 17542.648000, 1641.840047, 205.230406, 59.756000, X, Y) && !ellipse(20379.713577, 20058.663452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23962.568085, 18314.767197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24142.202057, 23530.424896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21034.467697, 19718.599335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.260193, 17912.089523, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 19:46:38 2012] Writing fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src65.gif
[Wed Mar  7 19:59:16 2012] Mean detx,y = (1785.19, 5785.92) 
[Wed Mar  7 19:59:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 20:00:00 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 20:00:01 2012] Setting source spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Wed Mar  7 20:00:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Wed Mar  7 21:12:40 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:40 2012] Error reading totcts from fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Wed Mar  7 21:12:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:43 2012] Using photon index=1.80, rate=0.0056, arf fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src65.arf
[Wed Mar  7 21:12:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:43 2012] Updating source flux to 8e-14
[Wed Mar  7 21:18:40 2012] Flag c found in src. 65 procflags, skipping spectral fitting