[Tue Mar  6 10:23:37 2012] Detection parameters:
  Position = (243.1, 235.2) = 0 56 1.94 26 20 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.6 +/- 18.8
  Background counts = 83.4
  Rate = 0.004 +/- 0.0006

[Tue Mar  6 10:23:37 2012] Off-axis axis estimate = 6.09'
[Tue Mar  6 18:24:41 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 18:24:41 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Tue Mar  6 18:24:41 2012] source mask rpix=2.2, npix_max = 28, mask sum = 28, frac = 0.976
[Tue Mar  6 18:24:41 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 9.47"
[Tue Mar  6 22:07:37 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src19.ximg exists
[Tue Mar  6 22:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src19.csv
[Tue Mar  6 22:07:37 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Mar  6 22:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src19.csv
[Tue Mar  6 22:07:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:07:39 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Mar  6 22:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Mar  6 22:07:39 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Mar  6 22:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Mar  6 22:07:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:08:45 2012] Warning, spatial fit 19 centroid is now closest to src. 61
[Tue Mar  6 22:08:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:45 2012] Assessing source extent using major
[Tue Mar  6 22:08:45 2012] Source does appear to be extended
[Tue Mar  6 22:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 04:56:58 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 04:56:58 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Wed Mar  7 04:56:58 2012] source mask rpix=2.2, npix_max = 28, mask sum = 28, frac = 0.976
[Wed Mar  7 04:56:58 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 9.47"
[Wed Mar  7 07:54:49 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src18.ximg exists
[Wed Mar  7 07:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src18.csv
[Wed Mar  7 07:54:49 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Mar  7 07:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src18.csv
[Wed Mar  7 07:54:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Mar  7 07:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Mar  7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Mar  7 07:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Mar  7 07:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 07:55:30 2012] Warning, spatial fit 18 centroid is now closest to src. 6
[Wed Mar  7 07:55:30 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:30 2012] Assessing source extent using major
[Wed Mar  7 07:55:30 2012] Source does appear to be extended
[Wed Mar  7 07:55:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 19:46:38 2012] XMMSAS src. selection expression = ellipse(21103.129410, 20413.263855, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar  7 19:46:38 2012] Writing source region out to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src60_src.reg
[Wed Mar  7 19:46:38 2012] Extracting stamp from image fullrun_mos2_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (206, 198) - (281, 273)
[Wed Mar  7 19:46:38 2012] XMMSAS bgd. selection expression = annulus(21103.129410, 20413.263855, 1087.500000, 2175.000000, X, Y) && !ellipse(21563.048187, 19763.887497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22568.393616, 18999.635986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22333.681061, 18220.248154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22479.805908, 20054.781799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21415.879913, 17892.030777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20869.023529, 18752.581528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23573.248000, 18830.632000, 1551.744045, 1551.744045, 0.000000, X, Y) && !ellipse(21610.640915, 18543.179367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21877.716949, 17664.405823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21556.206177, 20904.632782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21034.766000, 17542.648000, 1641.840047, 205.230406, 59.756000, X, Y) && !ellipse(20379.713577, 20058.663452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23962.568085, 18314.767197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21034.467697, 19718.599335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.260193, 17912.089523, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 19:46:38 2012] Writing fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src60.gif
[Wed Mar  7 19:58:01 2012] Mean detx,y = (-862.93, 5401.67) 
[Wed Mar  7 19:58:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 19:58:25 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 19:58:25 2012] Setting source spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Mar  7 19:58:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Wed Mar  7 20:45:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar  7 20:45:38 2012] rmf not generated due to insufficient counts
[Wed Mar  7 21:12:40 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:40 2012] Error reading totcts from fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Mar  7 21:12:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:43 2012] Using photon index=1.80, rate=0.00428, arf fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src60.arf
[Wed Mar  7 21:12:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:43 2012] Updating source flux to 6e-14
[Wed Mar  7 21:18:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting