[Tue Mar  6 10:23:36 2012] Detection parameters:
  Position = (267.3, 272.8) = 0 55 54.11 26 23 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.9 +/- 17.9
  Background counts = 109.5
  Rate = 0.004 +/- 0.0005

[Tue Mar  6 10:23:37 2012] Off-axis axis estimate = 2.92'
[Tue Mar  6 18:24:41 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 18:24:41 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Tue Mar  6 18:24:41 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.561
[Tue Mar  6 18:24:41 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.89"
[Tue Mar  6 22:07:38 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src28.ximg exists
[Tue Mar  6 22:07:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src28.csv
[Tue Mar  6 22:07:38 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Mar  6 22:07:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src28.csv
[Tue Mar  6 22:07:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:07:40 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Mar  6 22:07:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue Mar  6 22:07:40 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Mar  6 22:07:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue Mar  6 22:07:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:08:45 2012] Warning, spatial fit 28 centroid is now closest to src. 4
[Tue Mar  6 22:08:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:45 2012] Assessing source extent using major
[Tue Mar  6 22:08:45 2012] Source does appear to be extended
[Tue Mar  6 22:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 22:08:45 2012] Source is confused with source 49
[Wed Mar  7 04:56:58 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 04:56:58 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Wed Mar  7 04:56:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.561
[Wed Mar  7 04:56:58 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 7.89"
[Wed Mar  7 07:54:49 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src26.ximg exists
[Wed Mar  7 07:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src26.csv
[Wed Mar  7 07:54:49 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Mar  7 07:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src26.csv
[Wed Mar  7 07:54:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Mar  7 07:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Mar  7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Mar  7 07:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Mar  7 07:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 07:55:30 2012] Warning, spatial fit 26 centroid is now closest to src. 1
[Wed Mar  7 07:55:30 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:30 2012] Assessing source extent using major
[Wed Mar  7 07:55:30 2012] Source does appear to be extended
[Wed Mar  7 07:55:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 19:46:38 2012] XMMSAS src. selection expression = ellipse(23210.140747, 23688.338074, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar  7 19:46:38 2012] Writing source region out to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src51_src.reg
[Wed Mar  7 19:46:38 2012] Extracting stamp from image fullrun_mos2_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (230, 235) - (305, 310)
[Wed Mar  7 19:46:38 2012] XMMSAS bgd. selection expression = annulus(23210.140747, 23688.338074, 1087.500000, 2175.000000, X, Y) && !ellipse(24243.905609, 24914.725311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23039.172000, 24671.137800, 412.837612, 412.837612, 0.000000, X, Y) && !ellipse(23153.401200, 25146.527800, 504.376015, 504.376015, 0.000000, X, Y) && !ellipse(23592.812775, 25636.662292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22404.570343, 24406.202240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22800.159088, 23980.210754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22080.528000, 26758.554000, 1246.744036, 1246.744036, 0.000000, X, Y) && !ellipse(21556.206177, 20904.632782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.598495, 24573.004456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24142.202057, 23530.424896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21909.047623, 25967.701965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21663.379089, 26523.006653, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 19:46:38 2012] Writing fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src51.gif
[Wed Mar  7 20:02:37 2012] Mean detx,y = (-316.90, 1490.46) 
[Wed Mar  7 20:02:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 20:02:58 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 20:02:58 2012] Setting source spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Wed Mar  7 20:02:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Wed Mar  7 20:51:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar  7 20:51:09 2012] rmf not generated due to insufficient counts
[Wed Mar  7 21:12:40 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:40 2012] Error reading totcts from fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Wed Mar  7 21:12:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:43 2012] Using photon index=1.80, rate=0.00352, arf fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src51.arf
[Wed Mar  7 21:12:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:44 2012] Updating source flux to 4.1e-14
[Wed Mar  7 21:18:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting