[Tue Mar 6 10:23:36 2012] Detection parameters: Position = (238.9, 284.2) = 0 56 3.33 26 24 21.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 80.5 +/- 17.4 Background counts = 88.4 Rate = 0.002 +/- 0.0004 [Tue Mar 6 10:23:37 2012] Off-axis axis estimate = 4.44' [Tue Mar 6 18:24:41 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 18:24:41 2012] Initial guess for spatial extent in simple fitting = 8.65" [Tue Mar 6 18:24:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.009 [Tue Mar 6 18:24:41 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.65" [Tue Mar 6 22:07:38 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src53.ximg exists [Tue Mar 6 22:07:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src53.csv [Tue Mar 6 22:07:38 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src53_1.ximg exists [Tue Mar 6 22:07:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src53.csv [Tue Mar 6 22:07:38 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src53_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 22:07:40 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists [Tue Mar 6 22:07:40 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists [Tue Mar 6 22:07:40 2012] Fit fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly [Tue Mar 6 22:08:45 2012] Source 45 is offset by -1.809504 and 7.723973 pixels which is larger than 2 X fitted extent = 0.956161 x 0.956161, not incorporating fit results [Tue Mar 6 22:08:45 2012] Spatial fit model total counts = 946.820000, observed total counts = 960.000000 [Tue Mar 6 22:08:45 2012] Offset between fit and detection position for source 45 = 0.615380 pixels [Tue Mar 6 22:08:45 2012] 955.330800 total counts/ 918.394000 bgd. counts: snr = 1.218835 Spatial fit parameters: Offset between fit and detection position for source 45 = 0.615380 pixels Position = (238.5, 284.7) = 0 56 3.44 26 24 25.0 Extent = 6.1 (2.4-14.5)", rotation angle = 0 Source counts = 36.9 +/- 30.9 Background counts = 918.4 Rate = 0.0009 +/- 0.0007 Deleting source due to low Poisson probability