[Tue Mar  6 10:23:35 2012] Detection parameters:
  Position = (222.2, 388.7) = 0 56 8.74 26 31 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.4 +/- 12.4
  Background counts = 23.5
  Rate = 0.003 +/- 0.0004

[Tue Mar  6 10:23:37 2012] Off-axis axis estimate = 8.57'
[Tue Mar  6 18:24:41 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 18:24:41 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Tue Mar  6 18:24:41 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.026
[Tue Mar  6 18:24:41 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 10.71"
[Tue Mar  6 22:07:38 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src41.ximg exists
[Tue Mar  6 22:07:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src41.csv
[Tue Mar  6 22:07:38 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src41_1.ximg exists
[Tue Mar  6 22:07:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src41.csv
[Tue Mar  6 22:07:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:07:40 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Tue Mar  6 22:07:40 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Tue Mar  6 22:07:40 2012] Fit fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Tue Mar  6 22:08:45 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.881315 pixels away
[Tue Mar  6 22:08:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:45 2012] Assessing source extent using major
[Tue Mar  6 22:08:45 2012] Source does appear to be extended
[Tue Mar  6 22:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 04:56:58 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 04:56:58 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Mar  7 04:56:58 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.026
[Wed Mar  7 04:56:58 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 10.71"
[Wed Mar  7 07:54:49 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src37.ximg exists
[Wed Mar  7 07:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src37.csv
[Wed Mar  7 07:54:49 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed Mar  7 07:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src37.csv
[Wed Mar  7 07:54:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 07:54:51 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed Mar  7 07:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Wed Mar  7 07:54:51 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed Mar  7 07:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Wed Mar  7 07:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 07:55:30 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 15.774634 pixels away
[Wed Mar  7 07:55:30 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:30 2012] Assessing source extent using major
[Wed Mar  7 07:55:30 2012] Source does appear to be extended
[Wed Mar  7 07:55:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 19:46:38 2012] XMMSAS src. selection expression = ellipse(19286.571640, 33771.101227, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar  7 19:46:38 2012] Writing source region out to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src30_src.reg
[Wed Mar  7 19:46:38 2012] Extracting stamp from image fullrun_mos2_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (185, 351) - (260, 426)
[Wed Mar  7 19:46:38 2012] XMMSAS bgd. selection expression = annulus(19286.571640, 33771.101227, 1087.500000, 2175.000000, X, Y) && !ellipse(18421.330780, 32243.251343, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 19:46:38 2012] Writing fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src30.gif
[Wed Mar  7 20:09:05 2012] Mean detx,y = (-8110.61, -5931.75) 
[Wed Mar  7 20:09:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 20:09:38 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 20:09:38 2012] Setting source spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Mar  7 20:09:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Mar  7 21:06:50 2012] Not generating rmf since there are only 72 counts
[Wed Mar  7 21:06:50 2012] rmf not generated due to insufficient counts
[Wed Mar  7 21:12:41 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:41 2012] Error reading totcts from fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Mar  7 21:12:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:44 2012] Using photon index=1.80, rate=0.00258, arf fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src30.arf
[Wed Mar  7 21:12:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:44 2012] Updating source flux to 4.1e-14
[Wed Mar  7 21:18:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting