[Tue Mar 6 10:23:33 2012] Detection parameters: Position = (279.2, 286.9) = 0 55 50.26 26 24 35.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 4694.6 +/- 84.4 Background counts = 91.4 Rate = 0.1 +/- 0.002 [Tue Mar 6 10:23:37 2012] Off-axis axis estimate = 1.62' [Tue Mar 6 18:24:41 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 18:24:41 2012] Initial guess for spatial extent in simple fitting = 7.24" [Tue Mar 6 18:24:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854 [Tue Mar 6 18:24:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24" [Tue Mar 6 22:07:37 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src1.ximg exists [Tue Mar 6 22:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src1.csv [Tue Mar 6 22:07:37 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src1_1.ximg exists [Tue Mar 6 22:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src1.csv [Tue Mar 6 22:07:37 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 22:07:39 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Tue Mar 6 22:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src1.csv [Tue Mar 6 22:07:39 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Tue Mar 6 22:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src1.csv [Tue Mar 6 22:07:39 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 22:08:45 2012] Warning, spatial fit 1 centroid is now closest to src. 2 [Tue Mar 6 22:08:45 2012] Source 1 is offset by -0.069616 and 7.883578 pixels which is larger than 2 X fitted extent = 7.050069 x 7.050069, not incorporating fit results [Tue Mar 6 22:08:45 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 22:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 22:08:45 2012] Assessing source extent using major [Tue Mar 6 22:08:45 2012] Source does appear to be extended [Tue Mar 6 22:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 04:56:58 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting [Wed Mar 7 04:56:58 2012] Initial guess for spatial extent in simple fitting = 7.24" [Wed Mar 7 04:56:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854 [Wed Mar 7 04:56:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.24" [Wed Mar 7 07:54:48 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src1.ximg exists [Wed Mar 7 07:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src1.csv [Wed Mar 7 07:54:48 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src1_1.ximg exists [Wed Mar 7 07:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src1.csv [Wed Mar 7 07:54:48 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed Mar 7 07:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Mar 7 07:54:50 2012] fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed Mar 7 07:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Mar 7 07:54:50 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 07:55:30 2012] Warning, spatial fit 1 centroid is now closest to src. 2 [Wed Mar 7 07:55:30 2012] Source 1 is offset by 6.425628 and 1.079739 pixels which is larger than 2 X fitted extent = 5.797425 x 4.595973, not incorporating fit results [Wed Mar 7 07:55:30 2012] Source 1 is offset by 6.665996 and 5.679693 pixels which is larger than 2 X fitted extent = 4.012851 x 4.012851, not incorporating fit results [Wed Mar 7 07:55:30 2012] Vigneting correction estimate = 1.000000 [Wed Mar 7 07:55:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 7 07:55:30 2012] Assessing source extent using major [Wed Mar 7 07:55:30 2012] Source does appear to be extended [Wed Mar 7 07:55:30 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 19:46:37 2012] Counts = 4694.570801, rescaling region sizes by 2.000000 [Wed Mar 7 19:46:37 2012] XMMSAS src. selection expression = ellipse(24243.905609, 24914.725311, 1305.000000, 1305.000000, 0.000000, X, Y) [Wed Mar 7 19:46:37 2012] Writing source region out to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src1_src.reg [Wed Mar 7 19:46:37 2012] Extracting stamp from image fullrun_mos2_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (204, 212) - (354, 362) [Wed Mar 7 19:46:37 2012] XMMSAS bgd. selection expression = annulus(24243.905609, 24914.725311, 4350.000000, 8700.000000, X, Y) && !ellipse(23039.172000, 24671.137800, 412.837612, 412.837612, 0.000000, X, Y) && !ellipse(23153.401200, 25146.527800, 504.376015, 504.376015, 0.000000, X, Y) && !ellipse(21563.048187, 19763.887497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23592.812775, 25636.662292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22568.393616, 18999.635986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22333.681061, 18220.248154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32270.357800, 29832.178800, 439.661613, 439.661613, 0.000000, X, Y) && !ellipse(22705.010000, 27379.992000, 1219.720035, 1219.720035, 0.000000, X, Y) && !ellipse(15906.813599, 20325.213791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19456.670074, 30010.793854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22479.805908, 20054.781799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21415.879913, 17892.030777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21103.129410, 20413.263855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20869.023529, 18752.581528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23573.248000, 18830.632000, 1551.744045, 1551.744045, 0.000000, X, Y) && !ellipse(16262.469376, 29277.588928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21610.640915, 18543.179367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22404.570343, 24406.202240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23210.140747, 23688.338074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22800.159088, 23980.210754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.085200, 33608.940000, 411.943212, 411.943212, 0.000000, X, Y) && !ellipse(16115.563950, 18969.289001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21765.988000, 16753.364600, 1010.984029, 1010.984029, 0.000000, X, Y) && !ellipse(21877.716949, 17664.405823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22778.918854, 17305.615784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22080.528000, 26758.554000, 1246.744036, 1246.744036, 0.000000, X, Y) && !ellipse(21556.206177, 20904.632782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19286.571640, 33771.101227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21034.766000, 17542.648000, 1641.840047, 205.230406, 59.756000, X, Y) && !ellipse(32586.360779, 33321.469360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20379.713577, 20058.663452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.010620, 27269.675232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23962.568085, 18314.767197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.598495, 24573.004456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27065.398400, 23092.449600, 315.286409, 315.286409, 0.000000, X, Y) && !ellipse(24142.202057, 23530.424896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19740.929200, 27370.875600, 343.980010, 343.980010, 0.000000, X, Y) && !ellipse(21034.467697, 19718.599335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.079800, 25238.638000, 538.109479, 538.109479, 0.000000, X, Y) && !ellipse(23050.260193, 17912.089523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18421.330780, 32243.251343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21909.047623, 25967.701965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21663.379089, 26523.006653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24641.388920, 32703.309800, 597.496817, 597.496817, 0.000000, X, Y) [Wed Mar 7 19:46:37 2012] Writing fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src1.gif [Wed Mar 7 19:46:46 2012] Mean detx,y = (-3.55, 0.52) [Wed Mar 7 19:46:49 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 7 19:50:07 2012] Binned source spectrum to 10 counts/bin [Wed Mar 7 19:50:08 2012] Setting source spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Mar 7 19:50:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed Mar 7 20:20:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Mar 7 20:20:04 2012] rmf not generated due to insufficient counts [Wed Mar 7 21:12:38 2012] Updating aperture counts using extracted products [Wed Mar 7 21:12:38 2012] Error reading totcts from fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Mar 7 21:12:42 2012] Calculating source flux in energy range 0.30-8.00 [Wed Mar 7 21:12:42 2012] Using photon index=1.80, rate=0.11, arf fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src1.arf [Wed Mar 7 21:12:42 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Mar 7 21:12:42 2012] Updating source flux to 1.1e-12 [Wed Mar 7 21:18:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Mar 7 21:20:29 2012] xmm0203220101/analysis//spectral/fullrun_mos2_xmm0203220101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete