[Tue Mar  6 10:22:56 2012] Detection parameters:
  Position = (232.8, 204.1) = 0 56 5.27 26 18 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.7 +/- 13.6
  Background counts = 50.8
  Rate = 0.002 +/- 0.0005

[Tue Mar  6 10:22:57 2012] Off-axis axis estimate = 8.33'
[Tue Mar  6 14:48:40 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 14:48:40 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Tue Mar  6 14:48:40 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Tue Mar  6 14:48:40 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 10.59"
[Tue Mar  6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src55.ximg exists
[Tue Mar  6 18:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src55.csv
[Tue Mar  6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src55_1.ximg exists
[Tue Mar  6 18:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src55.csv
[Tue Mar  6 18:24:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 18:24:41 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Tue Mar  6 18:24:41 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Tue Mar  6 18:24:41 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Tue Mar  6 22:08:24 2012] Spatial fit model total counts = 908.038000, observed total counts = 890.000000
[Tue Mar  6 22:08:24 2012] Offset between fit and detection position for source 66 = 3.856800 pixels
[Tue Mar  6 22:08:24 2012] Warning, changing simple spatial fit ID from 55 to 34
[Tue Mar  6 22:08:24 2012] 961.261000 total counts/ 756.614000 bgd. counts: snr = 7.439919
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 3.856800 pixels
  Position = (231.7, 207.8) = 0 56 5.63 26 18 50.5
  Extent = 20.6 (20.6-41.2)", rotation angle = 0
  Source counts = 204.6 +/- 31.0
  Background counts = 756.6
  Rate = 0.005 +/- 0.0007
[Tue Mar  6 22:08:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:25 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 22:08:25 2012] Source does appear to be extended
[Tue Mar  6 22:08:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 22:08:25 2012] Source is confused with source 65
[Wed Mar  7 01:58:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 01:58:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 01:58:44 2012] Initial guess for spatial extent in simple fitting = 20.62"
[Wed Mar  7 01:58:44 2012] source mask rpix=4.7, npix_max = 109, mask sum = 102, frac = 0.929
[Wed Mar  7 01:58:44 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 20.62"
[Wed Mar  7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src45.ximg exists
[Wed Mar  7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src45.csv
[Wed Mar  7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src45_1.ximg exists
[Wed Mar  7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src45.csv
[Wed Mar  7 04:56:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Wed Mar  7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Wed Mar  7 04:56:58 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Wed Mar  7 07:55:18 2012] Warning, spatial fit 45 centroid is now closest to src. 53
[Wed Mar  7 07:55:18 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:18 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 07:55:18 2012] Source does appear to be extended
[Wed Mar  7 07:55:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:14:10 2012] XMMSAS src. selection expression = ellipse(20110.744000, 18028.254000, 1237.056036, 1237.056036, 0.000000, X, Y)
[Wed Mar  7 11:14:10 2012] Writing source region out to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src66_src.reg
[Wed Mar  7 11:14:10 2012] Extracting stamp from image fullrun_mos1_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (161, 137) - (303, 279)
[Wed Mar  7 11:14:10 2012] XMMSAS bgd. selection expression = annulus(20110.744000, 18028.254000, 2061.760059, 4123.520119, X, Y) && !ellipse(21976.765472, 19365.788422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21562.987000, 19885.586200, 871.232025, 871.232025, 0.000000, X, Y) && !ellipse(21954.343750, 18538.432175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22820.385101, 18933.704971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22173.754000, 23187.406000, 1293.384037, 1293.384037, 0.000000, X, Y) && !ellipse(22322.242000, 18489.778000, 1231.120035, 1231.120035, 0.000000, X, Y) && !ellipse(21206.228180, 18883.864761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15924.080582, 20317.996094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20775.647476, 19870.111237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22772.071533, 17274.524063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.646561, 18402.661942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23375.883800, 22794.260000, 1120.208032, 1120.208032, 0.000000, X, Y) && !ellipse(16141.163742, 18869.467865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21575.435226, 17703.057739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21822.128000, 21614.820000, 1089.832031, 1089.832031, 0.000000, X, Y) && !ellipse(21835.492000, 16827.364000, 955.704028, 955.704028, 0.000000, X, Y)
[Wed Mar  7 11:14:10 2012] Writing fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src66.gif
[Wed Mar  7 12:22:18 2012] Mean detx,y = (8007.06, 575.67) 
[Wed Mar  7 12:22:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 12:23:14 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 12:23:14 2012] Setting source spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Wed Mar  7 12:23:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Wed Mar  7 21:12:34 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:34 2012] Error reading totcts from fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Wed Mar  7 21:12:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:38 2012] Using photon index=1.80, rate=0.00485, arf fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src66.arf
[Wed Mar  7 21:12:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:38 2012] Updating source flux to 6.2e-14
[Wed Mar  7 21:12:49 2012] Flag c found in src. 66 procflags, skipping spectral fitting