[Tue Mar  6 10:22:56 2012] Detection parameters:
  Position = (253.9, 196.9) = 0 55 58.43 26 18 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.3 +/- 13.5
  Background counts = 43.2
  Rate = 0.002 +/- 0.0005

[Tue Mar  6 10:22:57 2012] Off-axis axis estimate = 8.04'
[Tue Mar  6 14:48:40 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 14:48:40 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Tue Mar  6 14:48:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Tue Mar  6 14:48:40 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 10.45"
[Tue Mar  6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src51.ximg exists
[Tue Mar  6 18:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src51.csv
[Tue Mar  6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src51_1.ximg exists
[Tue Mar  6 18:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src51.csv
[Tue Mar  6 18:24:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 18:24:40 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Tue Mar  6 18:24:40 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Tue Mar  6 18:24:40 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Tue Mar  6 22:08:25 2012] Spatial fit model total counts = 715.215000, observed total counts = 714.000000
[Tue Mar  6 22:08:25 2012] Offset between fit and detection position for source 64 = 3.771579 pixels
[Tue Mar  6 22:08:25 2012] 732.594500 total counts/ 670.000000 bgd. counts: snr = 2.418237
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 3.771579 pixels
  Position = (251.5, 194.0) = 0 55 59.21 26 17 50.5
  Extent = 11.9 (2.6-20.9)", rotation angle = 0
  Source counts = 62.6 +/- 27.1
  Background counts = 670.0
  Rate = 0.001 +/- 0.0006
[Tue Mar  6 22:08:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:25 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 22:08:25 2012] Source does appear to be extended
[Tue Mar  6 22:08:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 01:58:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 01:58:44 2012] Initial guess for spatial extent in simple fitting = 11.95"
[Wed Mar  7 01:58:44 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.996
[Wed Mar  7 01:58:44 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 11.95"
[Wed Mar  7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src42.ximg exists
[Wed Mar  7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src42.csv
[Wed Mar  7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src42_1.ximg exists
[Wed Mar  7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src42.csv
[Wed Mar  7 04:56:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Wed Mar  7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Wed Mar  7 04:56:58 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Wed Mar  7 07:55:18 2012] Warning, spatial fit 42 centroid is now closest to src. 67
[Wed Mar  7 07:55:18 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:18 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 07:55:18 2012] Source does appear to be extended
[Wed Mar  7 07:55:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:14:09 2012] XMMSAS src. selection expression = ellipse(21835.492000, 16827.364000, 716.778021, 716.778021, 0.000000, X, Y)
[Wed Mar  7 11:14:09 2012] Writing source region out to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src64_src.reg
[Wed Mar  7 11:14:09 2012] Extracting stamp from image fullrun_mos1_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (210, 153) - (293, 235)
[Wed Mar  7 11:14:09 2012] XMMSAS bgd. selection expression = annulus(21835.492000, 16827.364000, 1194.630034, 2389.260069, X, Y) && !ellipse(21976.765472, 19365.788422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21562.987000, 19885.586200, 871.232025, 871.232025, 0.000000, X, Y) && !ellipse(21954.343750, 18538.432175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22820.385101, 18933.704971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22322.242000, 18489.778000, 1231.120035, 1231.120035, 0.000000, X, Y) && !ellipse(21206.228180, 18883.864761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20775.647476, 19870.111237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22772.071533, 17274.524063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.646561, 18402.661942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21575.435226, 17703.057739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20110.744000, 18028.254000, 1649.408047, 1649.408047, 0.000000, X, Y)
[Wed Mar  7 11:14:09 2012] Writing fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src64.gif
[Wed Mar  7 12:20:49 2012] Mean detx,y = (8471.89, -1376.14) 
[Wed Mar  7 12:20:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 12:21:14 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 12:21:14 2012] Setting source spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Wed Mar  7 12:21:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Wed Mar  7 19:12:57 2012] Not generating rmf since there are only 62 counts
[Wed Mar  7 19:12:57 2012] rmf not generated due to insufficient counts
[Wed Mar  7 21:12:34 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:34 2012] Error reading totcts from fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Wed Mar  7 21:12:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:37 2012] Using photon index=1.80, rate=0.00148, arf fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src64.arf
[Wed Mar  7 21:12:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:37 2012] Updating source flux to 2.2e-14
[Wed Mar  7 21:12:49 2012] Source 64 has fewer than 100.000000 counts, skipping spectral fitting