[Tue Mar  6 10:22:56 2012] Detection parameters:
  Position = (239.4, 228.9) = 0 56 3.16 26 20 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.4 +/- 19.9
  Background counts = 77.0
  Rate = 0.004 +/- 0.0006

[Tue Mar  6 10:22:57 2012] Off-axis axis estimate = 6.61'
[Tue Mar  6 14:48:40 2012] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 14:48:40 2012] Initial guess for spatial extent in simple fitting = 9.73"
[Tue Mar  6 14:48:40 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.934
[Tue Mar  6 14:48:40 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 9.73"
[Tue Mar  6 18:24:38 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src22.ximg exists
[Tue Mar  6 18:24:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src22.csv
[Tue Mar  6 18:24:38 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue Mar  6 18:24:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src22.csv
[Tue Mar  6 18:24:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue Mar  6 18:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue Mar  6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue Mar  6 18:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue Mar  6 18:24:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 22:08:24 2012] Warning, spatial fit 22 centroid is now closest to src. 58
[Tue Mar  6 22:08:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:25 2012] Assessing source extent using major
[Tue Mar  6 22:08:25 2012] Source does appear to be extended
[Tue Mar  6 22:08:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 01:58:44 2012] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 01:58:44 2012] Initial guess for spatial extent in simple fitting = 9.73"
[Wed Mar  7 01:58:44 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.934
[Wed Mar  7 01:58:44 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 9.73"
[Wed Mar  7 04:56:56 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Mar  7 04:56:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src19.csv
[Wed Mar  7 04:56:56 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Mar  7 04:56:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src19.csv
[Wed Mar  7 04:56:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Mar  7 04:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed Mar  7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Mar  7 04:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed Mar  7 04:56:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 07:55:18 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 11.189979 pixels away
[Wed Mar  7 07:55:18 2012] Spatial fit model total counts = 1476.240000, observed total counts = 1330.000000
[Wed Mar  7 07:55:18 2012] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar  7 07:55:18 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:18 2012] Assessing source extent using major
[Wed Mar  7 07:55:18 2012] Source does appear to be extended
[Wed Mar  7 07:55:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:14:08 2012] XMMSAS src. selection expression = ellipse(20775.647476, 19870.111237, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar  7 11:14:08 2012] Writing source region out to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src60_src.reg
[Wed Mar  7 11:14:08 2012] Extracting stamp from image fullrun_mos1_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (202, 191) - (277, 266)
[Wed Mar  7 11:14:08 2012] XMMSAS bgd. selection expression = annulus(20775.647476, 19870.111237, 1087.500000, 2175.000000, X, Y) && !ellipse(21976.765472, 19365.788422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21562.987000, 19885.586200, 871.232025, 871.232025, 0.000000, X, Y) && !ellipse(21954.343750, 18538.432175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22820.385101, 18933.704971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22173.754000, 23187.406000, 1293.384037, 1293.384037, 0.000000, X, Y) && !ellipse(22322.242000, 18489.778000, 1231.120035, 1231.120035, 0.000000, X, Y) && !ellipse(21206.228180, 18883.864761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22772.071533, 17274.524063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.646561, 18402.661942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23375.883800, 22794.260000, 1120.208032, 1120.208032, 0.000000, X, Y) && !ellipse(21575.435226, 17703.057739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21822.128000, 21614.820000, 1089.832031, 1089.832031, 0.000000, X, Y) && !ellipse(21835.492000, 16827.364000, 955.704028, 955.704028, 0.000000, X, Y) && !ellipse(20110.744000, 18028.254000, 1649.408047, 1649.408047, 0.000000, X, Y)
[Wed Mar  7 11:14:08 2012] Writing fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src60.gif
[Wed Mar  7 11:52:22 2012] Mean detx,y = (6168.73, 732.63) 
[Wed Mar  7 11:52:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 11:52:48 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 11:52:48 2012] Setting source spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Mar  7 11:52:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Wed Mar  7 16:46:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar  7 16:46:47 2012] rmf not generated due to insufficient counts
[Wed Mar  7 21:12:32 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:33 2012] Error reading totcts from fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Mar  7 21:12:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:36 2012] Using photon index=1.80, rate=0.00406, arf fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src60.arf
[Wed Mar  7 21:12:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:36 2012] Updating source flux to 5.6e-14
[Wed Mar  7 21:12:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting