[Tue Mar 6 10:22:56 2012] Detection parameters: Position = (276.8, 270.5) = 0 55 51.05 26 23 17.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 104.9 +/- 17.3 Background counts = 90.6 Rate = 0.003 +/- 0.0004 [Tue Mar 6 10:22:57 2012] Off-axis axis estimate = 2.56' [Tue Mar 6 14:48:40 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 14:48:40 2012] Initial guess for spatial extent in simple fitting = 7.71" [Tue Mar 6 14:48:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.823 [Tue Mar 6 14:48:40 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.71" [Tue Mar 6 18:24:38 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src40.ximg exists [Tue Mar 6 18:24:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src40.csv [Tue Mar 6 18:24:38 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src40_1.ximg exists [Tue Mar 6 18:24:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src40.csv [Tue Mar 6 18:24:38 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src40_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 18:24:40 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists [Tue Mar 6 18:24:40 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists [Tue Mar 6 18:24:40 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly [Tue Mar 6 22:08:24 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.237264 pixels away [Tue Mar 6 22:08:24 2012] Source 48 is offset by -4.070407 and -6.564323 pixels which is larger than 2 X fitted extent = 3.206989 x 3.206989, not incorporating fit results [Tue Mar 6 22:08:25 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 22:08:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 22:08:25 2012] Assessing source extent using major [Tue Mar 6 22:08:25 2012] Source does appear to be extended [Tue Mar 6 22:08:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 01:58:44 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting [Wed Mar 7 01:58:44 2012] Initial guess for spatial extent in simple fitting = 7.71" [Wed Mar 7 01:58:44 2012] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.823 [Wed Mar 7 01:58:44 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.71" [Wed Mar 7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src33.ximg exists [Wed Mar 7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src33.csv [Wed Mar 7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src33_1.ximg exists [Wed Mar 7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src33.csv [Wed Mar 7 04:56:57 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src33_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists [Wed Mar 7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists [Wed Mar 7 04:56:58 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly [Wed Mar 7 07:55:18 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 14.947039 pixels away [Wed Mar 7 07:55:18 2012] Source 48 is offset by -3.389464 and -6.465978 pixels which is larger than 2 X fitted extent = 2.560515 x 2.560515, not incorporating fit results [Wed Mar 7 07:55:18 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 24.857796 pixels away [Wed Mar 7 07:55:18 2012] Vigneting correction estimate = 1.000000 [Wed Mar 7 07:55:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 7 07:55:18 2012] Assessing source extent using major [Wed Mar 7 07:55:18 2012] Source does appear to be extended [Wed Mar 7 07:55:18 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 07:55:18 2012] Source is confused with source 2 [Wed Mar 7 11:14:09 2012] XMMSAS src. selection expression = ellipse(24031.654602, 23481.667938, 652.500000, 652.500000, 0.000000, X, Y) [Wed Mar 7 11:14:09 2012] Writing source region out to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src48_src.reg [Wed Mar 7 11:14:09 2012] Extracting stamp from image fullrun_mos1_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (239, 233) - (314, 308) [Wed Mar 7 11:14:09 2012] XMMSAS bgd. selection expression = annulus(24031.654602, 23481.667938, 1087.500000, 2175.000000, X, Y) && !ellipse(24259.900200, 24909.325200, 1047.160030, 1047.160030, 0.000000, X, Y) && !ellipse(23960.460000, 24959.280000, 2586.768074, 2586.768074, 0.000000, X, Y) && !ellipse(23843.108000, 25888.444000, 1196.112034, 1196.112034, 0.000000, X, Y) && !ellipse(22173.754000, 23187.406000, 1293.384037, 1293.384037, 0.000000, X, Y) && !ellipse(23017.084000, 24349.190000, 1293.384037, 1293.384037, 0.000000, X, Y) && !ellipse(24095.790400, 22653.146600, 456.490413, 456.490413, 0.000000, X, Y) && !ellipse(21520.494705, 24573.230133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21897.008392, 25104.355469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23163.698000, 26755.070000, 2392.224069, 2392.224069, 0.000000, X, Y) && !ellipse(23375.883800, 22794.260000, 1120.208032, 1120.208032, 0.000000, X, Y) && !ellipse(21822.128000, 21614.820000, 1089.832031, 1089.832031, 0.000000, X, Y) && !ellipse(21477.285431, 25870.450897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.152191, 26494.996094, 870.000000, 870.000000, 0.000000, X, Y) [Wed Mar 7 11:14:09 2012] Writing fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src48.gif [Wed Mar 7 12:17:03 2012] Mean detx,y = (1528.22, -628.73) [Wed Mar 7 12:17:05 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 7 12:17:23 2012] Binned source spectrum to 10 counts/bin [Wed Mar 7 12:17:23 2012] Setting source spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src48_src_b10.pi.gz [Wed Mar 7 12:17:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src48_bgd.pi.gz [Wed Mar 7 19:07:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Mar 7 19:07:52 2012] rmf not generated due to insufficient counts [Wed Mar 7 21:12:33 2012] Updating aperture counts using extracted products [Wed Mar 7 21:12:33 2012] Error reading totcts from fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src48_src_b10.pi.gz [Wed Mar 7 21:12:37 2012] Calculating source flux in energy range 0.30-8.00 [Wed Mar 7 21:12:37 2012] Using photon index=1.80, rate=0.00264, arf fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src48.arf [Wed Mar 7 21:12:37 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Mar 7 21:12:37 2012] Updating source flux to 2.8e-14 [Wed Mar 7 21:12:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting