[Tue Mar  6 10:22:56 2012] Detection parameters:
  Position = (267.7, 274.6) = 0 55 54.00 26 23 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.6 +/- 19.4
  Background counts = 99.3
  Rate = 0.003 +/- 0.0005

[Tue Mar  6 10:22:57 2012] Off-axis axis estimate = 2.82'
[Tue Mar  6 14:48:40 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 14:48:40 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Tue Mar  6 14:48:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.943
[Tue Mar  6 14:48:40 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.84"
[Tue Mar  6 18:24:38 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src27.ximg exists
[Tue Mar  6 18:24:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src27.csv
[Tue Mar  6 18:24:38 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Mar  6 18:24:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src27.csv
[Tue Mar  6 18:24:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 18:24:40 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Mar  6 18:24:40 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Mar  6 18:24:40 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Mar  6 22:08:24 2012] Spatial fit model total counts = 1657.740000, observed total counts = 1607.000000
[Tue Mar  6 22:08:24 2012] Offset between fit and detection position for source 46 = 6.385465 pixels
[Tue Mar  6 22:08:24 2012] Warning, changing simple spatial fit ID from 27 to 9
[Tue Mar  6 22:08:24 2012] 1670.989000 total counts/ 1555.030000 bgd. counts: snr = 2.940594
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 6.385465 pixels
  Position = (265.1, 280.4) = 0 55 54.83 26 24 6.7
  Extent = 16.2 (16.1-32.3)", rotation angle = 0
  Source counts = 116.0 +/- 40.9
  Background counts = 1555.0
  Rate = 0.003 +/- 0.001
[Tue Mar  6 22:08:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:25 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 22:08:25 2012] Source does appear to be extended
[Tue Mar  6 22:08:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 22:08:25 2012] Source is confused with source 11
[Wed Mar  7 01:58:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 01:58:44 2012] Initial guess for spatial extent in simple fitting = 16.17"
[Wed Mar  7 01:58:44 2012] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.012
[Wed Mar  7 01:58:44 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 16.17"
[Wed Mar  7 04:56:56 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src21.ximg exists
[Wed Mar  7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src21.csv
[Wed Mar  7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Mar  7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src21.csv
[Wed Mar  7 04:56:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Mar  7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Mar  7 04:56:58 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Wed Mar  7 07:55:18 2012] Warning, spatial fit 21 centroid is now closest to src. 2
[Wed Mar  7 07:55:18 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:18 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 07:55:18 2012] Source does appear to be extended
[Wed Mar  7 07:55:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:14:08 2012] XMMSAS src. selection expression = ellipse(23017.084000, 24349.190000, 970.038028, 970.038028, 0.000000, X, Y)
[Wed Mar  7 11:14:08 2012] Writing source region out to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src46_src.reg
[Wed Mar  7 11:14:08 2012] Extracting stamp from image fullrun_mos1_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (209, 225) - (321, 336)
[Wed Mar  7 11:14:08 2012] XMMSAS bgd. selection expression = annulus(23017.084000, 24349.190000, 1616.730047, 3233.460093, X, Y) && !ellipse(24259.900200, 24909.325200, 1047.160030, 1047.160030, 0.000000, X, Y) && !ellipse(23960.460000, 24959.280000, 2586.768074, 2586.768074, 0.000000, X, Y) && !ellipse(23843.108000, 25888.444000, 1196.112034, 1196.112034, 0.000000, X, Y) && !ellipse(22173.754000, 23187.406000, 1293.384037, 1293.384037, 0.000000, X, Y) && !ellipse(23639.489000, 26999.921080, 1156.784033, 1156.784033, 0.000000, X, Y) && !ellipse(24095.790400, 22653.146600, 456.490413, 456.490413, 0.000000, X, Y) && !ellipse(21520.494705, 24573.230133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21897.008392, 25104.355469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23163.698000, 26755.070000, 2392.224069, 2392.224069, 0.000000, X, Y) && !ellipse(23375.883800, 22794.260000, 1120.208032, 1120.208032, 0.000000, X, Y) && !ellipse(24031.654602, 23481.667938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21822.128000, 21614.820000, 1089.832031, 1089.832031, 0.000000, X, Y) && !ellipse(24847.279602, 27000.803070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20586.079800, 23401.565400, 913.296026, 913.296026, 0.000000, X, Y) && !ellipse(21477.285431, 25870.450897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.152191, 26494.996094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.702000, 28152.294000, 1193.528034, 1193.528034, 0.000000, X, Y) && !ellipse(23348.624000, 27434.404000, 1267.760036, 1267.760036, 0.000000, X, Y) && !ellipse(21261.608200, 28659.810684, 1377.144040, 1377.144040, 0.000000, X, Y)
[Wed Mar  7 11:14:08 2012] Writing fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src46.gif
[Wed Mar  7 11:53:22 2012] Mean detx,y = (998.49, 560.07) 
[Wed Mar  7 11:53:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 11:53:50 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 11:53:50 2012] Setting source spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed Mar  7 11:53:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Wed Mar  7 21:12:33 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:33 2012] Error reading totcts from fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed Mar  7 21:12:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:36 2012] Using photon index=1.80, rate=0.00275, arf fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src46.arf
[Wed Mar  7 21:12:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:36 2012] Updating source flux to 2.6e-14
[Wed Mar  7 21:12:49 2012] Flag c found in src. 46 procflags, skipping spectral fitting