[Tue Mar  6 10:22:56 2012] Detection parameters:
  Position = (338.8, 290.5) = 0 55 30.96 26 24 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.9 +/- 12.6
  Background counts = 26.4
  Rate = 0.002 +/- 0.0004

[Tue Mar  6 10:22:57 2012] Off-axis axis estimate = 2.98'
[Tue Mar  6 14:48:40 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 14:48:40 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Tue Mar  6 14:48:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Tue Mar  6 14:48:40 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 7.92"
[Tue Mar  6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src48.ximg exists
[Tue Mar  6 18:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src48.csv
[Tue Mar  6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src48_1.ximg exists
[Tue Mar  6 18:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src48.csv
[Tue Mar  6 18:24:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 18:24:40 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Tue Mar  6 18:24:40 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Tue Mar  6 18:24:40 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Tue Mar  6 22:08:25 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 10.096818 pixels away
[Tue Mar  6 22:08:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 22:08:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 22:08:25 2012] Assessing source extent using major
[Tue Mar  6 22:08:25 2012] Source does appear to be extended
[Tue Mar  6 22:08:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 01:58:44 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 01:58:44 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Wed Mar  7 01:58:44 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Wed Mar  7 01:58:44 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 7.92"
[Wed Mar  7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src40.ximg exists
[Wed Mar  7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src40.csv
[Wed Mar  7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src40_1.ximg exists
[Wed Mar  7 04:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src40.csv
[Wed Mar  7 04:56:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Wed Mar  7 04:56:58 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Wed Mar  7 04:56:58 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Wed Mar  7 07:55:18 2012] Spatial fit model total counts = 226.973000, observed total counts = 227.000000
[Wed Mar  7 07:55:18 2012] Offset between fit and detection position for source 42 = 0.358437 pixels
[Wed Mar  7 07:55:18 2012] 222.708700 total counts/ 164.007000 bgd. counts: snr = 4.583735
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.358437 pixels
  Position = (338.5, 290.3) = 0 55 31.06 26 24 49.7
  Extent = 5.8 (4.3-8.0)", rotation angle = 0
  Source counts = 58.7 +/- 14.9
  Background counts = 164.0
  Rate = 0.001 +/- 0.0004
[Wed Mar  7 07:55:18 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 07:55:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 07:55:18 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 07:55:18 2012] Source does appear to be extended
[Wed Mar  7 07:55:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:14:09 2012] XMMSAS src. selection expression = ellipse(29403.429600, 25209.731800, 348.159010, 348.159010, 0.000000, X, Y)
[Wed Mar  7 11:14:09 2012] Writing source region out to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src42_src.reg
[Wed Mar  7 11:14:09 2012] Extracting stamp from image fullrun_mos1_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (319, 270) - (359, 310)
[Wed Mar  7 11:14:09 2012] XMMSAS bgd. selection expression = annulus(29403.429600, 25209.731800, 580.265017, 1160.530033, X, Y)
[Wed Mar  7 11:14:09 2012] Writing fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src42.gif
[Wed Mar  7 12:20:21 2012] Mean detx,y = (-2212.68, -4831.23) 
[Wed Mar  7 12:20:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 12:20:41 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 12:20:41 2012] Setting source spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Mar  7 12:20:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Wed Mar  7 19:12:46 2012] Not generating rmf since there are only 58 counts
[Wed Mar  7 19:12:46 2012] rmf not generated due to insufficient counts
[Wed Mar  7 21:12:34 2012] Updating aperture counts using extracted products
[Wed Mar  7 21:12:34 2012] Error reading totcts from fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Mar  7 21:12:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 21:12:37 2012] Using photon index=1.80, rate=0.00139, arf fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src42.arf
[Wed Mar  7 21:12:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 21:12:37 2012] Updating source flux to 2.2e-14
[Wed Mar  7 21:12:49 2012] Source 42 has fewer than 100.000000 counts, skipping spectral fitting