[Tue Mar 6 10:22:55 2012] Detection parameters: Position = (279.2, 287.0) = 0 55 50.27 26 24 35.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 4638.7 +/- 84.4 Background counts = 86.2 Rate = 0.1 +/- 0.002 [Tue Mar 6 10:22:57 2012] Off-axis axis estimate = 1.62' [Tue Mar 6 14:48:40 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 14:48:40 2012] Initial guess for spatial extent in simple fitting = 7.24" [Tue Mar 6 14:48:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854 [Tue Mar 6 14:48:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24" [Tue Mar 6 18:24:38 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src1.ximg exists [Tue Mar 6 18:24:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src1.csv [Tue Mar 6 18:24:38 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src1_1.ximg exists [Tue Mar 6 18:24:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src1.csv [Tue Mar 6 18:24:38 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Tue Mar 6 18:24:39 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Tue Mar 6 18:24:39 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Tue Mar 6 22:08:24 2012] Spatial fit model total counts = 9295.830000, observed total counts = 9291.000000 [Tue Mar 6 22:08:24 2012] Offset between fit and detection position for source 1 = 0.254335 pixels [Tue Mar 6 22:08:24 2012] 9172.140000 total counts/ 3616.940000 bgd. counts: snr = 92.369597 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.254335 pixels Position = (279.4, 286.9) = 0 55 50.20 26 24 34.7 Extent = 13.1 (12.5-13.7)", rotation angle = 0 Source counts = 5555.2 +/- 95.8 Background counts = 3616.9 Rate = 0.1 +/- 0.002 [Tue Mar 6 22:08:25 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 22:08:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 22:08:25 2012] Assessing source extent using major axis lower bound [Tue Mar 6 22:08:25 2012] Source does appear to be extended [Tue Mar 6 22:08:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Mar 6 22:08:25 2012] Source is confused with source 2 [Wed Mar 7 01:58:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Mar 7 01:58:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Mar 7 01:58:44 2012] Initial guess for spatial extent in simple fitting = 13.09" [Wed Mar 7 01:58:44 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.995 [Wed Mar 7 01:58:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.09" [Wed Mar 7 04:56:56 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src1.ximg exists [Wed Mar 7 04:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src1.csv [Wed Mar 7 04:56:56 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src1_1.ximg exists [Wed Mar 7 04:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src1.csv [Wed Mar 7 04:56:56 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed Mar 7 04:56:57 2012] fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed Mar 7 04:56:57 2012] Fit fullrun_mos1_xmm0203220101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Wed Mar 7 07:55:18 2012] Warning, spatial fit 1 centroid is now closest to src. 48 [Wed Mar 7 07:55:18 2012] Vigneting correction estimate = 1.000000 [Wed Mar 7 07:55:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 7 07:55:18 2012] Assessing source extent using major axis lower bound [Wed Mar 7 07:55:18 2012] Source does appear to be extended [Wed Mar 7 07:55:18 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 11:14:08 2012] Counts = 5555.200000, rescaling region sizes by 2.000000 [Wed Mar 7 11:14:08 2012] XMMSAS src. selection expression = ellipse(24259.900200, 24909.325200, 1570.740045, 1570.740045, 0.000000, X, Y) [Wed Mar 7 11:14:08 2012] Writing source region out to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src1_src.reg [Wed Mar 7 11:14:08 2012] Extracting stamp from image fullrun_mos1_xmm0203220101_pi300-10000_cl_sm2.00.img.gz, (189, 197) - (370, 377) [Wed Mar 7 11:14:08 2012] XMMSAS bgd. selection expression = annulus(24259.900200, 24909.325200, 5235.800151, 10471.600301, X, Y) && !ellipse(23960.460000, 24959.280000, 2586.768074, 2586.768074, 0.000000, X, Y) && !ellipse(21976.765472, 19365.788422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21562.987000, 19885.586200, 871.232025, 871.232025, 0.000000, X, Y) && !ellipse(23843.108000, 25888.444000, 1196.112034, 1196.112034, 0.000000, X, Y) && !ellipse(21954.343750, 18538.432175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22820.385101, 18933.704971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22173.754000, 23187.406000, 1293.384037, 1293.384037, 0.000000, X, Y) && !ellipse(23639.489000, 26999.921080, 1156.784033, 1156.784033, 0.000000, X, Y) && !ellipse(22322.242000, 18489.778000, 1231.120035, 1231.120035, 0.000000, X, Y) && !ellipse(32309.141340, 29884.836800, 483.486414, 318.599209, 63.489264, X, Y) && !ellipse(21206.228180, 18883.864761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19474.876938, 29965.549500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15924.080582, 20317.996094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20775.647476, 19870.111237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23017.084000, 24349.190000, 1293.384037, 1293.384037, 0.000000, X, Y) && !ellipse(24095.790400, 22653.146600, 456.490413, 456.490413, 0.000000, X, Y) && !ellipse(21520.494705, 24573.230133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22772.071533, 17274.524063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21897.008392, 25104.355469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.646561, 18402.661942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23163.698000, 26755.070000, 2392.224069, 2392.224069, 0.000000, X, Y) && !ellipse(27067.133400, 23112.948400, 416.323860, 416.323860, 0.000000, X, Y) && !ellipse(23375.883800, 22794.260000, 1120.208032, 1120.208032, 0.000000, X, Y) && !ellipse(16141.163742, 18869.467865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24031.654602, 23481.667938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13858.538147, 17321.792877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21575.435226, 17703.057739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21822.128000, 21614.820000, 1089.832031, 1089.832031, 0.000000, X, Y) && !ellipse(24847.279602, 27000.803070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29403.429600, 25209.731800, 464.212013, 464.212013, 0.000000, X, Y) && !ellipse(21835.492000, 16827.364000, 955.704028, 955.704028, 0.000000, X, Y) && !ellipse(20586.079800, 23401.565400, 913.296026, 913.296026, 0.000000, X, Y) && !ellipse(21477.285431, 25870.450897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20110.744000, 18028.254000, 1649.408047, 1649.408047, 0.000000, X, Y) && !ellipse(25094.152191, 26494.996094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18406.412170, 26969.062195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.702000, 28152.294000, 1193.528034, 1193.528034, 0.000000, X, Y) && !ellipse(23348.624000, 27434.404000, 1267.760036, 1267.760036, 0.000000, X, Y) && !ellipse(19265.363266, 33864.571533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21261.608200, 28659.810684, 1377.144040, 1377.144040, 0.000000, X, Y) [Wed Mar 7 11:14:08 2012] Writing fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src1.gif [Wed Mar 7 11:14:22 2012] Mean detx,y = (226.03, -79.16) [Wed Mar 7 11:14:25 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 7 11:22:30 2012] Binned source spectrum to 10 counts/bin [Wed Mar 7 11:22:30 2012] Setting source spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Mar 7 11:22:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed Mar 7 21:12:31 2012] Updating aperture counts using extracted products [Wed Mar 7 21:12:31 2012] Error reading totcts from fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Mar 7 21:12:35 2012] Calculating source flux in energy range 0.30-8.00 [Wed Mar 7 21:12:35 2012] Using photon index=1.80, rate=0.132, arf fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src1.arf [Wed Mar 7 21:12:35 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Mar 7 21:12:35 2012] Updating source flux to 1.2e-12 [Wed Mar 7 21:12:49 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Wed Mar 7 21:18:40 2012] Reading fit data from xmm0203220101/analysis//spectral/fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src1_pl.csv [Wed Mar 7 21:18:40 2012] Spectral fit parameter nH value = 1.18357e+21 [Wed Mar 7 21:18:40 2012] Spectral fit parameter PhoIndex value = 2.0863 [Wed Mar 7 21:18:40 2012] Failed to get F(0.3-8.0) from xmm0203220101/analysis//spectral/fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Wed Mar 7 21:18:40 2012] Calculating source flux in energy range 0.30-8.00 [Wed Mar 7 21:18:40 2012] Using Nh = 1.2e+21, photon index=2.09, rate=0.132, arf fullrun_mos1_xmm0203220101_pi300-10000_pass1_cl_src1.arf [Wed Mar 7 21:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Mar 7 21:18:40 2012] Updating source flux to 1.1e-12