[Fri Dec 16 11:48:36 2011] Detection parameters:
  Position = (311.4, 135.3) = 3 4 49.71 -0 8 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.7 +/- 9.8
  Background counts = 3.5
  Rate = 0.004 +/- 0.0006

[Fri Dec 16 11:48:36 2011] Off-axis axis estimate = 11.86'
[Fri Dec 16 12:01:52 2011] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 12:01:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 12:01:52 2011] Initial guess for spatial extent in simple fitting = 12.36"
[Fri Dec 16 12:01:52 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.097
[Fri Dec 16 12:01:52 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.36"
[Fri Dec 16 12:12:30 2011] fullrun_mos2_xmm0203160201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Dec 16 12:12:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203160201_pi300-10000_cl_pass0_src3.csv
[Fri Dec 16 12:12:30 2011] fullrun_mos2_xmm0203160201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Dec 16 12:12:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203160201_pi300-10000_cl_pass0_src3.csv
[Fri Dec 16 12:12:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203160201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203160201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 12:12:30 2011] fullrun_mos2_xmm0203160201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Dec 16 12:12:30 2011] fullrun_mos2_xmm0203160201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Dec 16 12:12:30 2011] Fit fullrun_mos2_xmm0203160201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Dec 16 12:12:34 2011] Spatial fit model total counts = 108.999000, observed total counts = 109.000000
[Fri Dec 16 12:12:34 2011] Offset between fit and detection position for source 12 = 0.079359 pixels
[Fri Dec 16 12:12:34 2011] 111.086300 total counts/ 73.905100 bgd. counts: snr = 4.325001
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.079359 pixels
  Position = (311.4, 135.4) = 3 4 49.72 -0 8 14.8
  Extent = 5.2 (3.6-6.7)", rotation angle = 0
  Source counts = 37.2 +/- 10.5
  Background counts = 73.9
  Rate = 0.002 +/- 0.0007
[Fri Dec 16 12:12:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 12:12:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 12:12:34 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 12:12:34 2011] Source does appear to be extended
[Fri Dec 16 12:12:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 12:23:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 12:23:18 2011] Initial guess for spatial extent in simple fitting = 5.22"
[Fri Dec 16 12:23:18 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.778
[Fri Dec 16 12:23:18 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.22"
[Fri Dec 16 12:34:00 2011] fullrun_mos2_xmm0203160201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Dec 16 12:34:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203160201_pi300-10000_cl_pass1_src3.csv
[Fri Dec 16 12:34:00 2011] fullrun_mos2_xmm0203160201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Dec 16 12:34:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203160201_pi300-10000_cl_pass1_src3.csv
[Fri Dec 16 12:34:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203160201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203160201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 12:34:00 2011] fullrun_mos2_xmm0203160201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Dec 16 12:34:00 2011] fullrun_mos2_xmm0203160201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Dec 16 12:34:00 2011] Fit fullrun_mos2_xmm0203160201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Dec 16 12:34:03 2011] Spatial fit model total counts = 99.981600, observed total counts = 100.000000
[Fri Dec 16 12:34:03 2011] Offset between fit and detection position for source 12 = 0.051465 pixels
[Fri Dec 16 12:34:03 2011] 103.356500 total counts/ 66.455100 bgd. counts: snr = 4.526668
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.051465 pixels
  Position = (311.4, 135.4) = 3 4 49.73 -0 8 14.9
  Extent = 5.1 (3.6-6.8)", rotation angle = 0
  Source counts = 36.9 +/- 10.2
  Background counts = 66.5
  Rate = 0.002 +/- 0.0007
[Fri Dec 16 12:34:03 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 12:34:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 12:34:03 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 12:34:03 2011] Source does appear to be extended
[Fri Dec 16 12:34:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 12:47:29 2011] XMMSAS src. selection expression = ellipse(27040.423600, 11728.401400, 308.642409, 308.642409, 0.000000, X, Y)
[Fri Dec 16 12:47:29 2011] Writing source region out to fullrun_mos2_xmm0203160201_pi300-10000_pass1_cl_src12_src.reg
[Fri Dec 16 12:47:29 2011] Extracting stamp from image fullrun_mos2_xmm0203160201_pi300-10000_cl_sm2.00.img.gz, (294, 118) - (329, 153)
[Fri Dec 16 12:47:29 2011] XMMSAS bgd. selection expression = annulus(27040.423600, 11728.401400, 514.404015, 1028.808030, X, Y)
[Fri Dec 16 12:47:29 2011] Writing fullrun_mos2_xmm0203160201_pi300-10000_pass1_cl_src12.gif
[Fri Dec 16 12:47:44 2011] Mean detx,y = (7568.04, 11089.55) 
[Fri Dec 16 12:47:45 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 12:47:49 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 12:47:49 2011] Setting source spectrum file to fullrun_mos2_xmm0203160201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Dec 16 12:47:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0203160201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Dec 16 12:52:17 2011] Not generating rmf since there are only 36 counts
[Fri Dec 16 12:52:17 2011] rmf not generated due to insufficient counts
[Fri Dec 16 12:52:40 2011] Updating aperture counts using extracted products
[Fri Dec 16 12:52:40 2011] Error reading totcts from fullrun_mos2_xmm0203160201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Dec 16 12:52:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 12:52:40 2011] Using photon index=1.80, rate=0.00245, arf fullrun_mos2_xmm0203160201_pi300-10000_pass1_cl_src12.arf
[Fri Dec 16 12:52:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 12:52:40 2011] Updating source flux to 9.7e-14
[Fri Dec 16 12:52:45 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting