[Mon Dec 19 21:56:28 2011] Detection parameters:
  Position = (291.8, 345.3) = 23 9 43.20 61 41 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.5 +/- 10.1
  Background counts = 4.7
  Rate = 0.003 +/- 0.0005

[Mon Dec 19 21:56:28 2011] Off-axis axis estimate = 3.43'
[Mon Dec 19 22:22:47 2011] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 22:22:47 2011] Initial guess for spatial extent in simple fitting = 8.15"
[Mon Dec 19 22:22:47 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.110
[Mon Dec 19 22:22:47 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 8.15"
[Mon Dec 19 22:51:51 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src4.ximg exists
[Mon Dec 19 22:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src4.csv
[Mon Dec 19 22:51:51 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Dec 19 22:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src4.csv
[Mon Dec 19 22:51:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 22:51:51 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Dec 19 22:51:51 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Dec 19 22:51:51 2011] Fit fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Dec 19 23:21:22 2011] Source 8 is offset by 1.380337 and 6.347984 pixels which is larger than
2 X fitted extent = 0.938056 x 0.938056, not incorporating fit results
[Mon Dec 19 23:21:22 2011] Source 8 is offset by -6.948422 and -4.786820 pixels which is larger than
2 X fitted extent = 1.315477 x 1.315477, not incorporating fit results
[Mon Dec 19 23:21:22 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 23:21:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 23:21:22 2011] Assessing source extent using major
[Mon Dec 19 23:21:22 2011] Source does appear to be extended
[Mon Dec 19 23:21:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 00:04:22 2011] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 00:04:22 2011] Initial guess for spatial extent in simple fitting = 8.15"
[Tue Dec 20 00:04:22 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.110
[Tue Dec 20 00:04:22 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 8.15"
[Tue Dec 20 00:30:59 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_src4.ximg exists
[Tue Dec 20 00:30:59 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Dec 20 00:30:59 2011] Fit fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_src4 appears to have run properly
[Tue Dec 20 00:30:59 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Dec 20 00:30:59 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Dec 20 00:30:59 2011] Fit fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Dec 20 00:56:33 2011] Source 8 is offset by -1.913551 and 6.667249 pixels which is larger than
2 X fitted extent = 0.936299 x 0.936299, not incorporating fit results
[Tue Dec 20 00:56:33 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 00:56:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 00:56:33 2011] Assessing source extent using major
[Tue Dec 20 00:56:33 2011] Source does appear to be extended
[Tue Dec 20 00:56:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 01:20:02 2011] XMMSAS src. selection expression = ellipse(25334.371277, 29995.710632, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 20 01:20:02 2011] Writing source region out to fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src8_src.reg
[Tue Dec 20 01:20:02 2011] Extracting stamp from image fullrun_mos1_xmm0203130201_pi300-10000_cl_sm2.00.img.gz, (254, 308) - (329, 383)
[Tue Dec 20 01:20:02 2011] XMMSAS bgd. selection expression = annulus(25334.371277, 29995.710632, 1087.500000, 2175.000000, X, Y) && !ellipse(26589.199188, 31054.000000, 1740.000000, 1740.000000, 0.000000, X, Y)
[Tue Dec 20 01:20:02 2011] Writing fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src8.gif
[Tue Dec 20 01:20:39 2011] Mean detx,y = (2304.18, -3288.08) 
[Tue Dec 20 01:20:40 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 01:20:49 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 01:20:49 2011] Setting source spectrum file to fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Dec 20 01:20:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Dec 20 01:27:34 2011] Not generating rmf since there are only 62 counts
[Tue Dec 20 01:27:34 2011] rmf not generated due to insufficient counts
[Tue Dec 20 01:46:34 2011] Updating aperture counts using extracted products
[Tue Dec 20 01:46:34 2011] Error reading totcts from fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Dec 20 01:46:34 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 01:46:34 2011] Using photon index=1.80, rate=0.00329, arf fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src8.arf
[Tue Dec 20 01:46:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 01:46:34 2011] Updating source flux to 3.7e-14
[Tue Dec 20 01:46:37 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting