[Mon Dec 19 21:56:28 2011] Detection parameters:
  Position = (306.2, 357.5) = 23 9 34.38 61 42 10.7
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 24.0 +/- 8.8
  Background counts = 19.0
  Rate = 0.002 +/- 0.0006

[Mon Dec 19 21:56:28 2011] Off-axis axis estimate = 4.32'
[Mon Dec 19 22:22:47 2011] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 22:22:47 2011] Initial guess for spatial extent in simple fitting = 8.59"
[Mon Dec 19 22:22:47 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.817
[Mon Dec 19 22:22:47 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 8.59"
[Mon Dec 19 22:51:51 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src10.ximg exists
[Mon Dec 19 22:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src10.csv
[Mon Dec 19 22:51:51 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Dec 19 22:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src10.csv
[Mon Dec 19 22:51:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 22:51:51 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Dec 19 22:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Dec 19 22:51:51 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Dec 19 22:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Dec 19 22:51:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203130201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 23:21:22 2011] Warning, spatial fit 10 centroid is now closest to src. 8
[Mon Dec 19 23:21:22 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 23:21:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 23:21:22 2011] Assessing source extent using major
[Mon Dec 19 23:21:22 2011] Source does appear to be extended
[Mon Dec 19 23:21:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 00:04:22 2011] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 00:04:22 2011] Initial guess for spatial extent in simple fitting = 8.59"
[Tue Dec 20 00:04:22 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.817
[Tue Dec 20 00:04:22 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 8.59"
[Tue Dec 20 00:30:59 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_src10.ximg exists
[Tue Dec 20 00:30:59 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Dec 20 00:30:59 2011] Fit fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue Dec 20 00:30:59 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Dec 20 00:30:59 2011] fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Dec 20 00:30:59 2011] Fit fullrun_mos1_xmm0203130201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Dec 20 00:56:33 2011] Source 13 is offset by -1.847874 and -3.722414 pixels which is larger than
2 X fitted extent = 1.764616 x 1.764616, not incorporating fit results
[Tue Dec 20 00:56:33 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 129.647112 pixels away
[Tue Dec 20 00:56:33 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 00:56:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 00:56:33 2011] Assessing source extent using major
[Tue Dec 20 00:56:33 2011] Source does appear to be extended
[Tue Dec 20 00:56:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 01:20:02 2011] XMMSAS src. selection expression = ellipse(26589.199188, 31054.000000, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Dec 20 01:20:02 2011] Writing source region out to fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src13_src.reg
[Tue Dec 20 01:20:02 2011] Extracting stamp from image fullrun_mos1_xmm0203130201_pi300-10000_cl_sm2.00.img.gz, (231, 282) - (381, 432)
[Tue Dec 20 01:20:02 2011] XMMSAS bgd. selection expression = annulus(26589.199188, 31054.000000, 2175.000000, 4350.000000, X, Y) && !ellipse(29869.493980, 32775.879600, 381.273711, 381.273711, 0.000000, X, Y) && !ellipse(25334.371277, 29995.710632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28595.792800, 27901.426800, 368.672811, 368.672811, 0.000000, X, Y)
[Tue Dec 20 01:20:02 2011] Writing fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src13.gif
[Tue Dec 20 01:22:05 2011] Mean detx,y = (3761.08, -2354.18) 
[Tue Dec 20 01:22:06 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 01:22:58 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 01:22:58 2011] Setting source spectrum file to fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Dec 20 01:22:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Dec 20 01:27:50 2011] Not generating rmf since there are only 23 counts
[Tue Dec 20 01:27:50 2011] rmf not generated due to insufficient counts
[Tue Dec 20 01:46:34 2011] Updating aperture counts using extracted products
[Tue Dec 20 01:46:34 2011] Error reading totcts from fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Dec 20 01:46:34 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 01:46:34 2011] Using photon index=1.80, rate=0.00177, arf fullrun_mos1_xmm0203130201_pi300-10000_pass1_cl_src13.arf
[Tue Dec 20 01:46:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 01:46:35 2011] Updating source flux to 1.8e-14
[Tue Dec 20 01:46:37 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting