[Thu Nov 24 02:19:00 2011] Detection parameters:
  Position = (318.8, 309.9) = 2 52 32.11 -12 46 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39363.6 +/- 232.1
  Background counts = 36.3
  Rate = 0.8 +/- 0.005

[Thu Nov 24 02:19:01 2011] Off-axis axis estimate = 1.69'
[Thu Nov 24 03:00:05 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 03:00:05 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Nov 24 03:00:05 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Nov 24 03:00:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Nov 24 03:29:51 2011] fullrun_mos2_xmm0203060501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 03:29:51 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0203060501_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 03:29:51 2011] fullrun_mos2_xmm0203060501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 03:29:51 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0203060501_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 03:29:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203060501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203060501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:29:51 2011] fullrun_mos2_xmm0203060501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 03:29:51 2011] fullrun_mos2_xmm0203060501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 03:29:51 2011] Fit fullrun_mos2_xmm0203060501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Nov 24 03:29:58 2011] Spatial fit model total counts = 33627.800000, observed total counts = 33675.000000
[Thu Nov 24 03:29:58 2011] Offset between fit and detection position for source 1 = 0.157416 pixels
[Thu Nov 24 03:29:58 2011] 33485.590000 total counts/ 6245.290000 bgd. counts: snr = 344.695474
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.157416 pixels
  Position = (318.7, 309.8) = 2 52 32.15 -12 46 12.3
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 27240.3 +/- 183.0
  Background counts = 6245.3
  Rate = 0.6 +/- 0.004
[Thu Nov 24 03:29:58 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 03:29:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 03:29:58 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 03:29:58 2011] Source does appear to be extended
[Thu Nov 24 03:29:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 03:52:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 03:52:33 2011] Initial guess for spatial extent in simple fitting = 5.53"
[Thu Nov 24 03:52:33 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.957
[Thu Nov 24 03:52:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.53"
[Thu Nov 24 04:13:30 2011] fullrun_mos2_xmm0203060501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Nov 24 04:13:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203060501_pi300-10000_cl_pass1_src1.csv
[Thu Nov 24 04:13:30 2011] fullrun_mos2_xmm0203060501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Nov 24 04:13:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203060501_pi300-10000_cl_pass1_src1.csv
[Thu Nov 24 04:13:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203060501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203060501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:13:30 2011] fullrun_mos2_xmm0203060501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Nov 24 04:13:30 2011] fullrun_mos2_xmm0203060501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Nov 24 04:13:30 2011] Fit fullrun_mos2_xmm0203060501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Nov 24 04:13:35 2011] Spatial fit model total counts = 33767.600000, observed total counts = 33738.000000
[Thu Nov 24 04:13:35 2011] Offset between fit and detection position for source 1 = 0.020036 pixels
[Thu Nov 24 04:13:35 2011] 33916.000000 total counts/ 6745.900000 bgd. counts: snr = 330.804408
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020036 pixels
  Position = (318.7, 309.8) = 2 52 32.15 -12 46 12.4
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 27170.1 +/- 184.2
  Background counts = 6745.9
  Rate = 0.6 +/- 0.004
[Thu Nov 24 04:13:35 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:13:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:13:35 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 04:13:35 2011] Source does appear to be extended
[Thu Nov 24 04:13:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 05:20:28 2011] Counts = 27170.100000, rescaling region sizes by 3.000000
[Thu Nov 24 05:20:28 2011] XMMSAS src. selection expression = ellipse(27675.679800, 26902.267220, 987.145228, 987.145228, 0.000000, X, Y)
[Thu Nov 24 05:20:28 2011] Writing source region out to fullrun_mos2_xmm0203060501_pi300-10000_pass1_cl_src1_src.reg
[Thu Nov 24 05:20:28 2011] Extracting stamp from image fullrun_mos2_xmm0203060501_pi300-10000_cl_sm2.00.img.gz, (262, 253) - (375, 367)
[Thu Nov 24 05:20:28 2011] XMMSAS bgd. selection expression = annulus(27675.679800, 26902.267220, 4935.726142, 9871.452284, X, Y) && !ellipse(26774.366241, 26533.703766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36399.420929, 28249.219086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36999.176117, 28305.877411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17670.896042, 18768.694901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20360.520370, 30929.856140, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 05:20:28 2011] Writing fullrun_mos2_xmm0203060501_pi300-10000_pass1_cl_src1.gif
[Thu Nov 24 05:20:35 2011] Mean detx,y = (-58.47, -54.40) 
[Thu Nov 24 05:20:36 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 05:23:01 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 05:23:01 2011] Setting source spectrum file to fullrun_mos2_xmm0203060501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 05:23:01 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0203060501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Nov 24 05:34:20 2011] Updating aperture counts using extracted products
[Thu Nov 24 05:34:20 2011] Error reading totcts from fullrun_mos2_xmm0203060501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 05:34:20 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 05:34:20 2011] Using photon index=1.80, rate=0.568, arf fullrun_mos2_xmm0203060501_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 05:34:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 05:34:20 2011] Updating source flux to 7.1e-12
[Thu Nov 24 05:35:18 2011] Reading fit data from xmm0203060501/analysis//spectral/fullrun_mos2_xmm0203060501_pi300-10000_pass1_cl_src1_pl.csv
[Thu Nov 24 05:35:18 2011] Spectral fit parameter nH value = 8.4161e+21
[Thu Nov 24 05:35:18 2011] Spectral fit parameter PhoIndex value = 8.51353
[Thu Nov 24 05:35:18 2011] Failed to get F(0.3-8.0) from xmm0203060501/analysis//spectral/fullrun_mos2_xmm0203060501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Nov 24 05:35:18 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 05:35:18 2011] Using Nh = 8.4e+21, photon index=8.51, rate=0.568, arf fullrun_mos2_xmm0203060501_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 05:35:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 05:35:18 2011] Updating source flux to 4.2e-12