[Thu Nov 24 02:18:39 2011] Detection parameters:
  Position = (216.6, 456.1) = 2 53 2.50 -12 35 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 398.9 +/- 24.4
  Background counts = 18.8
  Rate = 0.008 +/- 0.0005

[Thu Nov 24 02:18:39 2011] Off-axis axis estimate = 12.88'
[Thu Nov 24 02:42:50 2011] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:42:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 02:42:50 2011] Initial guess for spatial extent in simple fitting = 12.87"
[Thu Nov 24 02:42:50 2011] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.024
[Thu Nov 24 02:42:50 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 12.87"
[Thu Nov 24 03:00:05 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_src2.ximg exists
[Thu Nov 24 03:00:05 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Nov 24 03:00:05 2011] Fit fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu Nov 24 03:00:05 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Nov 24 03:00:05 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Nov 24 03:00:05 2011] Fit fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Nov 24 03:29:54 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 15.700311 pixels away
[Thu Nov 24 03:29:54 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 03:29:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 03:29:54 2011] Assessing source extent using major
[Thu Nov 24 03:29:54 2011] Source does appear to be extended
[Thu Nov 24 03:29:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 03:39:05 2011] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 03:39:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 03:39:05 2011] Initial guess for spatial extent in simple fitting = 12.87"
[Thu Nov 24 03:39:05 2011] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.024
[Thu Nov 24 03:39:05 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 12.87"
[Thu Nov 24 03:52:33 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src2.ximg exists
[Thu Nov 24 03:52:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src2.csv
[Thu Nov 24 03:52:33 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Nov 24 03:52:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src2.csv
[Thu Nov 24 03:52:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:52:33 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Nov 24 03:52:33 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Nov 24 03:52:33 2011] Fit fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Nov 24 04:13:33 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 15.700311 pixels away
[Thu Nov 24 04:13:33 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:13:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:13:33 2011] Assessing source extent using major
[Thu Nov 24 04:13:33 2011] Source does appear to be extended
[Thu Nov 24 04:13:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 04:59:09 2011] XMMSAS src. selection expression = ellipse(18792.594147, 39632.128845, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Nov 24 04:59:09 2011] Writing source region out to fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src14_src.reg
[Thu Nov 24 04:59:09 2011] Extracting stamp from image fullrun_mos1_xmm0203060501_pi300-10000_cl_sm2.00.img.gz, (179, 419) - (254, 494)
[Thu Nov 24 04:59:09 2011] XMMSAS bgd. selection expression = annulus(18792.594147, 39632.128845, 1087.500000, 2175.000000, X, Y)
[Thu Nov 24 04:59:09 2011] Writing fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src14.gif
[Thu Nov 24 05:02:33 2011] Mean detx,y = (8685.16, -13082.63) 
[Thu Nov 24 05:02:34 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 05:02:50 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 05:02:50 2011] Setting source spectrum file to fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Nov 24 05:02:50 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Nov 24 05:13:29 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Nov 24 05:13:29 2011] rmf not generated due to insufficient counts
[Thu Nov 24 05:34:20 2011] Updating aperture counts using extracted products
[Thu Nov 24 05:34:20 2011] Error reading totcts from fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Nov 24 05:34:20 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 05:34:20 2011] Using photon index=1.80, rate=0.00803, arf fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src14.arf
[Thu Nov 24 05:34:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 05:34:20 2011] Updating source flux to 3e-13
[Thu Nov 24 05:34:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting