[Thu Nov 24 02:18:39 2011] Detection parameters:
  Position = (318.7, 309.9) = 2 52 32.14 -12 46 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39372.8 +/- 234.2
  Background counts = 35.0
  Rate = 0.8 +/- 0.005

[Thu Nov 24 02:18:39 2011] Off-axis axis estimate = 1.69'
[Thu Nov 24 02:42:50 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:42:50 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Nov 24 02:42:50 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Thu Nov 24 02:42:50 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Nov 24 03:00:05 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 03:00:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 03:00:05 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 03:00:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 03:00:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:00:05 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 03:00:05 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 03:00:05 2011] Fit fullrun_mos1_xmm0203060501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Nov 24 03:29:54 2011] Spatial fit model total counts = 33703.200000, observed total counts = 33709.000000
[Thu Nov 24 03:29:54 2011] Offset between fit and detection position for source 1 = 0.128641 pixels
[Thu Nov 24 03:29:54 2011] 33584.890000 total counts/ 7041.990000 bgd. counts: snr = 316.301076
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.128641 pixels
  Position = (318.6, 309.8) = 2 52 32.16 -12 46 12.5
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 26542.9 +/- 183.3
  Background counts = 7042.0
  Rate = 0.6 +/- 0.004
[Thu Nov 24 03:29:54 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 03:29:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 03:29:54 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 03:29:54 2011] Source does appear to be extended
[Thu Nov 24 03:29:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 03:39:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 03:39:05 2011] Initial guess for spatial extent in simple fitting = 5.52"
[Thu Nov 24 03:39:05 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.958
[Thu Nov 24 03:39:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.52"
[Thu Nov 24 03:52:33 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Nov 24 03:52:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src1.csv
[Thu Nov 24 03:52:33 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Nov 24 03:52:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src1.csv
[Thu Nov 24 03:52:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:52:33 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Nov 24 03:52:33 2011] fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Nov 24 03:52:33 2011] Fit fullrun_mos1_xmm0203060501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Nov 24 04:13:33 2011] Spatial fit model total counts = 33738.900000, observed total counts = 33734.000000
[Thu Nov 24 04:13:33 2011] Offset between fit and detection position for source 1 = 0.016811 pixels
[Thu Nov 24 04:13:33 2011] 33885.140000 total counts/ 7394.240000 bgd. counts: snr = 308.070378
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016811 pixels
  Position = (318.6, 309.7) = 2 52 32.16 -12 46 12.5
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 26490.9 +/- 184.1
  Background counts = 7394.2
  Rate = 0.6 +/- 0.004
[Thu Nov 24 04:13:33 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:13:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:13:33 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 04:13:33 2011] Source does appear to be extended
[Thu Nov 24 04:13:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 04:59:09 2011] Counts = 26490.900000, rescaling region sizes by 3.000000
[Thu Nov 24 04:59:09 2011] XMMSAS src. selection expression = ellipse(27673.006400, 26899.087400, 991.380629, 991.380629, 0.000000, X, Y)
[Thu Nov 24 04:59:09 2011] Writing source region out to fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src1_src.reg
[Thu Nov 24 04:59:09 2011] Extracting stamp from image fullrun_mos1_xmm0203060501_pi300-10000_cl_sm2.00.img.gz, (262, 253) - (376, 367)
[Thu Nov 24 04:59:09 2011] XMMSAS bgd. selection expression = annulus(27673.006400, 26899.087400, 4956.903143, 9913.806285, X, Y) && !ellipse(36391.758514, 28315.093018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37032.722000, 28334.905800, 398.961611, 398.961611, 0.000000, X, Y) && !ellipse(17666.239120, 18720.275131, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 04:59:09 2011] Writing fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src1.gif
[Thu Nov 24 04:59:17 2011] Mean detx,y = (157.85, -100.67) 
[Thu Nov 24 04:59:18 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 05:02:30 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 05:02:30 2011] Setting source spectrum file to fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 05:02:30 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Nov 24 05:34:20 2011] Updating aperture counts using extracted products
[Thu Nov 24 05:34:20 2011] Error reading totcts from fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 05:34:20 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 05:34:20 2011] Using photon index=1.80, rate=0.553, arf fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 05:34:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 05:34:20 2011] Updating source flux to 6.1e-12
[Thu Nov 24 05:34:51 2011] Reading fit data from xmm0203060501/analysis//spectral/fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src1_pl.csv
[Thu Nov 24 05:34:51 2011] Spectral fit parameter nH value = 8.74807e+21
[Thu Nov 24 05:34:51 2011] Spectral fit parameter PhoIndex value = 8.76071
[Thu Nov 24 05:34:51 2011] Failed to get F(0.3-8.0) from xmm0203060501/analysis//spectral/fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Nov 24 05:34:51 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 05:34:51 2011] Using Nh = 8.7e+21, photon index=8.76, rate=0.553, arf fullrun_mos1_xmm0203060501_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 05:34:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 05:34:51 2011] Updating source flux to 3.7e-12