[Thu Dec  1 17:34:19 2011] Detection parameters:
  Position = (156.2, 376.9) = 9 33 53.68 47 29 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.9 +/- 13.4
  Background counts = 2.0
  Rate = 0.01 +/- 0.002

[Thu Dec  1 17:34:19 2011] Off-axis axis estimate = 11.78'
[Thu Dec  1 18:01:52 2011] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 18:01:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec  1 18:01:52 2011] Initial guess for spatial extent in simple fitting = 12.32"
[Thu Dec  1 18:01:52 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.946
[Thu Dec  1 18:01:52 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.32"
[Thu Dec  1 18:19:13 2011] fullrun_mos1_xmm0203050701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec  1 18:19:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050701_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 18:19:13 2011] fullrun_mos1_xmm0203050701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec  1 18:19:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050701_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 18:19:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203050701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203050701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 18:19:14 2011] fullrun_mos1_xmm0203050701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec  1 18:19:14 2011] fullrun_mos1_xmm0203050701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec  1 18:19:14 2011] Fit fullrun_mos1_xmm0203050701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec  1 18:45:39 2011] Spatial fit model total counts = 154.866000, observed total counts = 155.000000
[Thu Dec  1 18:45:39 2011] Offset between fit and detection position for source 4 = 0.159967 pixels
[Thu Dec  1 18:45:39 2011] 153.935200 total counts/ 66.294500 bgd. counts: snr = 10.763836
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.159967 pixels
  Position = (156.3, 376.8) = 9 33 53.63 47 29 23.2
  Extent = 6.1 (5.1-7.5)", rotation angle = 0
  Source counts = 87.6 +/- 12.4
  Background counts = 66.3
  Rate = 0.01 +/- 0.002
[Thu Dec  1 18:45:39 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 18:45:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 18:45:39 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 18:45:39 2011] Source does appear to be extended
[Thu Dec  1 18:45:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 19:16:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec  1 19:16:19 2011] Initial guess for spatial extent in simple fitting = 6.09"
[Thu Dec  1 19:16:19 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.109
[Thu Dec  1 19:16:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.09"
[Thu Dec  1 19:31:43 2011] fullrun_mos1_xmm0203050701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec  1 19:31:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050701_pi300-10000_cl_pass1_src1.csv
[Thu Dec  1 19:31:43 2011] fullrun_mos1_xmm0203050701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec  1 19:31:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050701_pi300-10000_cl_pass1_src1.csv
[Thu Dec  1 19:31:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203050701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203050701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 19:31:43 2011] fullrun_mos1_xmm0203050701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec  1 19:31:43 2011] fullrun_mos1_xmm0203050701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec  1 19:31:43 2011] Fit fullrun_mos1_xmm0203050701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec  1 20:02:22 2011] Spatial fit model total counts = 125.823000, observed total counts = 126.000000
[Thu Dec  1 20:02:22 2011] Offset between fit and detection position for source 4 = 0.114344 pixels
[Thu Dec  1 20:02:22 2011] 127.332700 total counts/ 46.804000 bgd. counts: snr = 11.770887
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.114344 pixels
  Position = (156.2, 376.8) = 9 33 53.68 47 29 23.2
  Extent = 5.5 (4.3-7.0)", rotation angle = 0
  Source counts = 80.5 +/- 11.3
  Background counts = 46.8
  Rate = 0.01 +/- 0.001
[Thu Dec  1 20:02:22 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 20:02:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 20:02:22 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 20:02:22 2011] Source does appear to be extended
[Thu Dec  1 20:02:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 20:17:38 2011] XMMSAS src. selection expression = ellipse(13538.958460, 32734.287600, 329.730009, 329.730009, 0.000000, X, Y)
[Thu Dec  1 20:17:38 2011] Writing source region out to fullrun_mos1_xmm0203050701_pi300-10000_pass1_cl_src4_src.reg
[Thu Dec  1 20:17:38 2011] Extracting stamp from image fullrun_mos1_xmm0203050701_pi300-10000_cl_sm2.00.img.gz, (137, 358) - (175, 396)
[Thu Dec  1 20:17:38 2011] XMMSAS bgd. selection expression = annulus(13538.958460, 32734.287600, 549.550016, 1099.100032, X, Y)
[Thu Dec  1 20:17:38 2011] Writing fullrun_mos1_xmm0203050701_pi300-10000_pass1_cl_src4.gif
[Thu Dec  1 20:17:39 2011] Mean detx,y = (8423.44, -11515.11) 
[Thu Dec  1 20:17:40 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 20:17:48 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 20:17:48 2011] Setting source spectrum file to fullrun_mos1_xmm0203050701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Dec  1 20:17:48 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0203050701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Dec  1 20:20:31 2011] Not generating rmf since there are only 80 counts
[Thu Dec  1 20:20:31 2011] rmf not generated due to insufficient counts
[Thu Dec  1 20:24:53 2011] Updating aperture counts using extracted products
[Thu Dec  1 20:24:53 2011] Error reading totcts from fullrun_mos1_xmm0203050701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Dec  1 20:24:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 20:24:53 2011] Using photon index=1.80, rate=0.00988, arf fullrun_mos1_xmm0203050701_pi300-10000_pass1_cl_src4.arf
[Thu Dec  1 20:24:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 20:24:53 2011] Updating source flux to 2.9e-13
[Thu Dec  1 20:24:55 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Dec  1 20:24:56 2011] xmm0203050701/analysis//spectral/fullrun_mos1_xmm0203050701_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete