[Wed Mar 21 10:12:25 2012] Detection parameters:
  Position = (259.0, 455.9) = 21 1 37.11 11 5 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.1 +/- 6.7
  Background counts = 5.2
  Rate = 0.005 +/- 0.001

[Wed Mar 21 10:12:26 2012] Off-axis axis estimate = 11.77'
[Wed Mar 21 10:14:55 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 10:14:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 10:14:55 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Wed Mar 21 10:14:55 2012] source mask rpix=2.8, npix_max = 44, mask sum = 35, frac = 0.789
[Wed Mar 21 10:14:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.31"
[Wed Mar 21 10:43:19 2012] fullrun_pn_xmm0203050601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 21 10:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 10:43:19 2012] fullrun_pn_xmm0203050601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 21 10:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 10:43:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203050601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203050601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 10:43:20 2012] fullrun_pn_xmm0203050601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 21 10:43:20 2012] fullrun_pn_xmm0203050601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 21 10:43:20 2012] Fit fullrun_pn_xmm0203050601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 21 11:29:16 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Wed Mar 21 11:29:16 2012] Source 1 is offset by -4.010607 and -5.214263 pixels which is larger than
2 X fitted extent = 1.388768 x 1.388768, not incorporating fit results
[Wed Mar 21 11:29:16 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 11:29:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 11:29:16 2012] Assessing source extent using major
[Wed Mar 21 11:29:16 2012] Source does appear to be extended
[Wed Mar 21 11:29:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 11:29:16 2012] Source is confused with source 2
[Wed Mar 21 11:29:33 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 11:29:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 11:29:33 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Wed Mar 21 11:29:33 2012] source mask rpix=2.8, npix_max = 44, mask sum = 35, frac = 0.789
[Wed Mar 21 11:29:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.31"
[Wed Mar 21 12:00:35 2012] fullrun_pn_xmm0203050601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 21 12:00:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 12:00:35 2012] fullrun_pn_xmm0203050601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 21 12:00:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 12:00:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203050601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203050601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 12:00:35 2012] fullrun_pn_xmm0203050601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 21 12:00:35 2012] fullrun_pn_xmm0203050601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 21 12:00:35 2012] Fit fullrun_pn_xmm0203050601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 21 12:46:32 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Wed Mar 21 12:46:32 2012] Source 1 is offset by -1.275961 and 6.340004 pixels which is larger than
2 X fitted extent = 1.680262 x 1.680262, not incorporating fit results
[Wed Mar 21 12:46:32 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 12:46:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 12:46:32 2012] Assessing source extent using major
[Wed Mar 21 12:46:32 2012] Source does appear to be extended
[Wed Mar 21 12:46:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 12:46:49 2012] XMMSAS src. selection expression = ellipse(22483.167175, 39612.901123, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 12:46:49 2012] Writing source region out to fullrun_pn_xmm0203050601_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 21 12:46:49 2012] Extracting stamp from image fullrun_pn_xmm0203050601_pi300-10000_cl_sm2.00.img.gz, (221, 418) - (296, 493)
[Wed Mar 21 12:46:49 2012] XMMSAS bgd. selection expression = annulus(22483.167175, 39612.901123, 1087.500000, 2175.000000, X, Y) && !ellipse(22559.781200, 39209.912000, 1113.792032, 1113.792032, 0.000000, X, Y)
[Wed Mar 21 12:46:49 2012] Writing fullrun_pn_xmm0203050601_pi300-10000_pass1_cl_src1.gif
[Wed Mar 21 12:46:58 2012] Mean detx,y = (7046.23, 12749.29) 
[Wed Mar 21 12:47:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 12:47:55 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 12:47:56 2012] Setting source spectrum file to fullrun_pn_xmm0203050601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 12:47:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0203050601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 21 13:01:44 2012] Not generating rmf since there are only 24 counts
[Wed Mar 21 13:01:44 2012] rmf not generated due to insufficient counts
[Wed Mar 21 13:40:22 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:40:22 2012] Error reading totcts from fullrun_pn_xmm0203050601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 13:40:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:40:23 2012] Using photon index=1.80, rate=0.00532, arf fullrun_pn_xmm0203050601_pi300-10000_pass1_cl_src1.arf
[Wed Mar 21 13:40:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:40:23 2012] Updating source flux to 3.4e-14
[Wed Mar 21 13:40:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 21 13:40:58 2012] xmm0203050601/analysis//spectral/fullrun_pn_xmm0203050601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete