[Wed Mar 21 10:13:45 2012] Detection parameters:
  Position = (279.2, 285.8) = 21 1 31.14 10 52 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 682.9 +/- 31.1
  Background counts = 2.1
  Rate = 0.1 +/- 0.005

[Wed Mar 21 10:13:46 2012] Off-axis axis estimate = 1.67'
[Wed Mar 21 11:06:38 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 11:06:38 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Wed Mar 21 11:06:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Wed Mar 21 11:06:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Wed Mar 21 11:29:10 2012] fullrun_mos2_xmm0203050601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 21 11:29:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0203050601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 11:29:10 2012] fullrun_mos2_xmm0203050601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 21 11:29:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0203050601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 11:29:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203050601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203050601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 11:29:10 2012] fullrun_mos2_xmm0203050601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 21 11:29:10 2012] fullrun_mos2_xmm0203050601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 21 11:29:10 2012] Fit fullrun_mos2_xmm0203050601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 21 11:29:23 2012] Spatial fit model total counts = 612.725000, observed total counts = 590.000000
[Wed Mar 21 11:29:23 2012] Offset between fit and detection position for source 1 = 0.171145 pixels
[Wed Mar 21 11:29:23 2012] 612.680000 total counts/ 169.636000 bgd. counts: snr = 34.016361
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.171145 pixels
  Position = (279.2, 285.6) = 21 1 31.14 10 52 52.1
  Extent = 4.6 (4.2-5.0)", rotation angle = 0
  Source counts = 443.0 +/- 24.8
  Background counts = 169.6
  Rate = 0.07 +/- 0.004
[Wed Mar 21 11:29:23 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 11:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 11:29:23 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 11:29:23 2012] Source does appear to be extended
[Wed Mar 21 11:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 12:23:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 12:23:52 2012] Initial guess for spatial extent in simple fitting = 4.56"
[Wed Mar 21 12:23:52 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.939
[Wed Mar 21 12:23:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.56"
[Wed Mar 21 12:46:27 2012] fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 21 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 12:46:27 2012] fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 21 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 12:46:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 12:46:27 2012] fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 21 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Mar 21 12:46:27 2012] fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 21 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Mar 21 12:46:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203050601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 12:46:39 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Wed Mar 21 12:46:39 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 12:46:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 12:46:39 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 12:46:39 2012] Source does appear to be extended
[Wed Mar 21 12:46:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 13:26:05 2012] XMMSAS src. selection expression = ellipse(24237.942200, 24800.174000, 273.573608, 273.573608, 0.000000, X, Y)
[Wed Mar 21 13:26:05 2012] Writing source region out to fullrun_mos2_xmm0203050601_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 21 13:26:05 2012] Extracting stamp from image fullrun_mos2_xmm0203050601_pi300-10000_cl_sm2.00.img.gz, (263, 270) - (295, 301)
[Wed Mar 21 13:26:05 2012] XMMSAS bgd. selection expression = annulus(24237.942200, 24800.174000, 455.956013, 911.912026, X, Y)
[Wed Mar 21 13:26:05 2012] Writing fullrun_mos2_xmm0203050601_pi300-10000_pass1_cl_src1.gif
[Wed Mar 21 13:26:08 2012] Mean detx,y = (67.64, 41.85) 
[Wed Mar 21 13:26:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 13:26:19 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 13:26:20 2012] Setting source spectrum file to fullrun_mos2_xmm0203050601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 13:26:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203050601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 21 13:40:25 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:40:25 2012] Error reading totcts from fullrun_mos2_xmm0203050601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 13:40:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:40:26 2012] Using photon index=1.80, rate=0.0718, arf fullrun_mos2_xmm0203050601_pi300-10000_pass1_cl_src1.arf
[Wed Mar 21 13:40:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:40:26 2012] Updating source flux to 9.7e-13
[Wed Mar 21 13:40:49 2012] Reading fit data from xmm0203050601/analysis//spectral/fullrun_mos2_xmm0203050601_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar 21 13:40:49 2012] Spectral fit parameter nH value = 6.79569e+20
[Wed Mar 21 13:40:49 2012] Spectral fit parameter PhoIndex value = 1.49631
[Wed Mar 21 13:40:49 2012] Failed to get F(0.3-8.0) from xmm0203050601/analysis//spectral/fullrun_mos2_xmm0203050601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar 21 13:40:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:40:49 2012] Using Nh = 6.8e+20, photon index=1.50, rate=0.0718, arf fullrun_mos2_xmm0203050601_pi300-10000_pass1_cl_src1.arf
[Wed Mar 21 13:40:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:40:50 2012] Updating source flux to 1.2e-12