[Fri Mar 16 06:57:56 2012] Detection parameters:
  Position = (315.7, 314.8) = 20 50 17.87 -5 36 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8314.5 +/- 109.1
  Background counts = 19.3
  Rate = 0.9 +/- 0.01

[Fri Mar 16 06:57:57 2012] Off-axis axis estimate = 1.72'
[Fri Mar 16 06:59:43 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 06:59:43 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Mar 16 06:59:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Fri Mar 16 06:59:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Mar 16 07:37:59 2012] fullrun_pn_xmm0203050501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 16 07:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050501_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 07:37:59 2012] fullrun_pn_xmm0203050501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 16 07:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050501_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 07:37:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203050501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203050501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 07:37:59 2012] fullrun_pn_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 16 07:37:59 2012] fullrun_pn_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 16 07:37:59 2012] Fit fullrun_pn_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Mar 16 08:36:53 2012] Spatial fit model total counts = 7351.760000, observed total counts = 7303.000000
[Fri Mar 16 08:36:53 2012] Offset between fit and detection position for source 1 = 0.238119 pixels
[Fri Mar 16 08:36:53 2012] 7366.150000 total counts/ 1558.030000 bgd. counts: snr = 147.145733
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.238119 pixels
  Position = (315.5, 314.6) = 20 50 17.92 -5 36 25.8
  Extent = 5.9 (5.7-6.0)", rotation angle = 0
  Source counts = 5808.1 +/- 85.8
  Background counts = 1558.0
  Rate = 0.5 +/- 0.008
[Fri Mar 16 08:36:53 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 08:36:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 08:36:53 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 08:36:53 2012] Source does appear to be extended
[Fri Mar 16 08:36:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 08:37:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 08:37:09 2012] Initial guess for spatial extent in simple fitting = 5.85"
[Fri Mar 16 08:37:09 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.661
[Fri Mar 16 08:37:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.85"
[Fri Mar 16 09:15:58 2012] fullrun_pn_xmm0203050501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 09:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 09:15:58 2012] fullrun_pn_xmm0203050501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 09:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 09:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203050501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203050501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 09:15:59 2012] fullrun_pn_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 09:15:59 2012] fullrun_pn_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 09:15:59 2012] Fit fullrun_pn_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 16 10:22:52 2012] Warning, spatial fit 1 centroid is now closest to src. 15
[Fri Mar 16 10:22:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:22:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:22:52 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:22:52 2012] Source does appear to be extended
[Fri Mar 16 10:22:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 10:23:19 2012] Counts = 5808.120000, rescaling region sizes by 2.000000
[Fri Mar 16 10:23:19 2012] XMMSAS src. selection expression = ellipse(27399.893200, 27321.201000, 702.170052, 702.170052, 0.000000, X, Y)
[Fri Mar 16 10:23:19 2012] Writing source region out to fullrun_pn_xmm0203050501_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 10:23:19 2012] Extracting stamp from image fullrun_pn_xmm0203050501_pi300-10000_cl_sm2.00.img.gz, (275, 274) - (356, 355)
[Fri Mar 16 10:23:19 2012] XMMSAS bgd. selection expression = annulus(27399.893200, 27321.201000, 2340.566839, 4681.133677, X, Y) && !ellipse(22244.626068, 31266.606781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26020.205170, 27824.677246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24055.916260, 27001.772156, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 10:23:19 2012] Writing fullrun_pn_xmm0203050501_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 10:23:36 2012] Mean detx,y = (98.76, -209.39) 
[Fri Mar 16 10:23:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 10:25:24 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 10:25:24 2012] Setting source spectrum file to fullrun_pn_xmm0203050501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 10:25:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0203050501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 11:40:30 2012] Updating aperture counts using extracted products
[Fri Mar 16 11:40:30 2012] Error reading totcts from fullrun_pn_xmm0203050501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 11:40:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:40:31 2012] Using photon index=1.80, rate=0.548, arf fullrun_pn_xmm0203050501_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 11:40:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:40:31 2012] Updating source flux to 1.3e-12
[Fri Mar 16 11:41:49 2012] Reading fit data from xmm0203050501/analysis//spectral/fullrun_pn_xmm0203050501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Mar 16 11:41:49 2012] Spectral fit parameter nH value = 6.6762e+20
[Fri Mar 16 11:41:49 2012] Spectral fit parameter PhoIndex value = 1.30874
[Fri Mar 16 11:41:49 2012] Failed to get F(0.3-8.0) from xmm0203050501/analysis//spectral/fullrun_pn_xmm0203050501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 11:41:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:41:49 2012] Using Nh = 6.7e+20, photon index=1.31, rate=0.548, arf fullrun_pn_xmm0203050501_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 11:41:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:41:49 2012] Updating source flux to 2.1e-12