[Fri Mar 16 06:58:43 2012] Detection parameters:
  Position = (315.7, 314.8) = 20 50 17.86 -5 36 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3199.6 +/- 67.2
  Background counts = 6.2
  Rate = 0.3 +/- 0.006

[Fri Mar 16 06:58:44 2012] Off-axis axis estimate = 1.72'
[Fri Mar 16 08:05:48 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 08:05:48 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Mar 16 08:05:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri Mar 16 08:05:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Mar 16 08:36:45 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 16 08:36:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 08:36:45 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 16 08:36:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 08:36:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 08:36:45 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 16 08:36:45 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 16 08:36:45 2012] Fit fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Mar 16 08:37:01 2012] Spatial fit model total counts = 2945.370000, observed total counts = 2869.000000
[Fri Mar 16 08:37:01 2012] Offset between fit and detection position for source 4 = 0.260964 pixels
[Fri Mar 16 08:37:01 2012] 2946.035000 total counts/ 754.515000 bgd. counts: snr = 79.783209
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.260964 pixels
  Position = (315.5, 314.6) = 20 50 17.92 -5 36 25.9
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 2191.5 +/- 54.3
  Background counts = 754.5
  Rate = 0.2 +/- 0.004
[Fri Mar 16 08:37:01 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 08:37:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 08:37:01 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 08:37:01 2012] Source does appear to be extended
[Fri Mar 16 08:37:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 09:43:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 09:43:32 2012] Initial guess for spatial extent in simple fitting = 5.25"
[Fri Mar 16 09:43:32 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.773
[Fri Mar 16 09:43:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.25"
[Fri Mar 16 10:22:41 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 10:22:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 10:22:41 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 10:22:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 10:22:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:22:41 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 10:22:41 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 10:22:41 2012] Fit fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 16 10:23:03 2012] Spatial fit model total counts = 2952.610000, observed total counts = 2869.000000
[Fri Mar 16 10:23:03 2012] Offset between fit and detection position for source 4 = 0.014034 pixels
[Fri Mar 16 10:23:03 2012] 2971.874000 total counts/ 768.514000 bgd. counts: snr = 79.480313
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.014034 pixels
  Position = (315.5, 314.6) = 20 50 17.92 -5 36 26.0
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2203.4 +/- 54.5
  Background counts = 768.5
  Rate = 0.2 +/- 0.004
[Fri Mar 16 10:23:03 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:23:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:23:03 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:23:03 2012] Source does appear to be extended
[Fri Mar 16 10:23:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 11:26:42 2012] Counts = 2203.360000, rescaling region sizes by 2.000000
[Fri Mar 16 11:26:42 2012] XMMSAS src. selection expression = ellipse(27399.462000, 27318.038000, 635.559618, 635.559618, 0.000000, X, Y)
[Fri Mar 16 11:26:42 2012] Writing source region out to fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 16 11:26:42 2012] Extracting stamp from image fullrun_mos2_xmm0203050501_pi300-10000_cl_sm2.00.img.gz, (279, 278) - (352, 351)
[Fri Mar 16 11:26:42 2012] XMMSAS bgd. selection expression = annulus(27399.462000, 27318.038000, 2118.532061, 4237.064122, X, Y) && !ellipse(24008.873400, 26979.210600, 501.508814, 501.508814, 0.000000, X, Y) && !ellipse(25327.848000, 28752.339600, 324.463209, 324.463209, 0.000000, X, Y) && !ellipse(26039.845860, 27756.095400, 292.278339, 292.278339, 0.000000, X, Y)
[Fri Mar 16 11:26:42 2012] Writing fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src4.gif
[Fri Mar 16 11:26:46 2012] Mean detx,y = (51.68, 60.87) 
[Fri Mar 16 11:26:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:27:13 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:27:14 2012] Setting source spectrum file to fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 11:27:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 16 11:40:35 2012] Updating aperture counts using extracted products
[Fri Mar 16 11:40:35 2012] Error reading totcts from fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 11:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:40:36 2012] Using photon index=1.80, rate=0.175, arf fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src4.arf
[Fri Mar 16 11:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:40:36 2012] Updating source flux to 1.8e-12
[Fri Mar 16 11:41:12 2012] Reading fit data from xmm0203050501/analysis//spectral/fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src4_pl.csv
[Fri Mar 16 11:41:12 2012] Spectral fit parameter nH value = 2.83855e+20
[Fri Mar 16 11:41:12 2012] Spectral fit parameter PhoIndex value = 1.1931
[Fri Mar 16 11:41:12 2012] Failed to get F(0.3-8.0) from xmm0203050501/analysis//spectral/fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 11:41:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:41:12 2012] Using Nh = 2.8e+20, photon index=1.19, rate=0.175, arf fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src4.arf
[Fri Mar 16 11:41:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:41:12 2012] Updating source flux to 2.6e-12