[Fri Mar 16 06:58:43 2012] Detection parameters:
  Position = (480.3, 256.2) = 20 49 29.89 -5 40 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.1 +/- 12.2
  Background counts = 4.3
  Rate = 0.008 +/- 0.001

[Fri Mar 16 06:58:44 2012] Off-axis axis estimate = 13.54'
[Fri Mar 16 08:05:48 2012] Using EEF radius (= 13.20 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 08:05:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 08:05:48 2012] Initial guess for spatial extent in simple fitting = 13.20"
[Fri Mar 16 08:05:48 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.981
[Fri Mar 16 08:05:48 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.20"
[Fri Mar 16 08:36:45 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src6.ximg exists
[Fri Mar 16 08:36:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src6.csv
[Fri Mar 16 08:36:45 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Mar 16 08:36:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src6.csv
[Fri Mar 16 08:36:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 08:36:45 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Mar 16 08:36:45 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Mar 16 08:36:45 2012] Fit fullrun_mos2_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Mar 16 08:37:01 2012] Spatial fit model total counts = 132.997000, observed total counts = 133.000000
[Fri Mar 16 08:37:01 2012] Offset between fit and detection position for source 2 = 0.370623 pixels
[Fri Mar 16 08:37:01 2012] 135.604500 total counts/ 64.893000 bgd. counts: snr = 8.777910
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.370623 pixels
  Position = (480.0, 256.3) = 20 49 29.98 -5 40 39.0
  Extent = 6.6 (5.1-9.0)", rotation angle = 0
  Source counts = 70.7 +/- 11.6
  Background counts = 64.9
  Rate = 0.006 +/- 0.0009
[Fri Mar 16 08:37:01 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 08:37:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 08:37:01 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 08:37:01 2012] Source does appear to be extended
[Fri Mar 16 08:37:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 09:43:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 09:43:32 2012] Initial guess for spatial extent in simple fitting = 6.64"
[Fri Mar 16 09:43:32 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.973
[Fri Mar 16 09:43:32 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 6.64"
[Fri Mar 16 10:22:41 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_src6.ximg exists
[Fri Mar 16 10:22:41 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Mar 16 10:22:41 2012] Fit fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Mar 16 10:22:41 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Mar 16 10:22:41 2012] fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Mar 16 10:22:41 2012] Fit fullrun_mos2_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Mar 16 10:23:03 2012] Spatial fit model total counts = 119.996000, observed total counts = 120.000000
[Fri Mar 16 10:23:03 2012] Offset between fit and detection position for source 2 = 0.110573 pixels
[Fri Mar 16 10:23:03 2012] 121.138900 total counts/ 46.504900 bgd. counts: snr = 10.944284
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.110573 pixels
  Position = (480.0, 256.5) = 20 49 29.97 -5 40 38.6
  Extent = 9.4 (7.2-12.5)" x 4.6 (3.4-6.2)", rotation angle = 102 (88-117) degrees
  Source counts = 74.6 +/- 11.0
  Background counts = 46.5
  Rate = 0.006 +/- 0.0009
[Fri Mar 16 10:23:04 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:23:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:23:04 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:23:04 2012] Source does appear to be extended
[Fri Mar 16 10:23:04 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Fri Mar 16 11:26:42 2012] XMMSAS src. selection expression = ellipse(41712.905612, 22263.057000, 562.018216, 274.343408, 101.602600, X, Y)
[Fri Mar 16 11:26:42 2012] Writing source region out to fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src2_src.reg
[Fri Mar 16 11:26:42 2012] Extracting stamp from image fullrun_mos2_xmm0203050501_pi300-10000_cl_sm2.00.img.gz, (448, 224) - (512, 289)
[Fri Mar 16 11:26:42 2012] XMMSAS bgd. selection expression = annulus(41712.905612, 22263.057000, 936.697027, 1873.394054, X, Y)
[Fri Mar 16 11:26:42 2012] Writing fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src2.gif
[Fri Mar 16 11:28:58 2012] Mean detx,y = (-15026.80, -1762.39) 
[Fri Mar 16 11:29:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:29:14 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:29:14 2012] Setting source spectrum file to fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar 16 11:29:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Mar 16 11:38:48 2012] Not generating rmf since there are only 74 counts
[Fri Mar 16 11:38:48 2012] rmf not generated due to insufficient counts
[Fri Mar 16 11:40:35 2012] Updating aperture counts using extracted products
[Fri Mar 16 11:40:35 2012] Error reading totcts from fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar 16 11:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:40:36 2012] Using photon index=1.80, rate=0.00593, arf fullrun_mos2_xmm0203050501_pi300-10000_pass1_cl_src2.arf
[Fri Mar 16 11:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:40:36 2012] Updating source flux to 1.7e-13
[Fri Mar 16 11:40:55 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting