[Fri Mar 16 06:58:21 2012] Detection parameters:
  Position = (256.2, 360.0) = 20 50 35.18 -5 33 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.2 +/- 11.8
  Background counts = 5.2
  Rate = 0.01 +/- 0.001

[Fri Mar 16 06:58:21 2012] Off-axis axis estimate = 5.41'
[Fri Mar 16 07:37:59 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 07:37:59 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Fri Mar 16 07:37:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.110
[Fri Mar 16 07:37:59 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.13"
[Fri Mar 16 08:05:47 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src5.ximg exists
[Fri Mar 16 08:05:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src5.csv
[Fri Mar 16 08:05:47 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Mar 16 08:05:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src5.csv
[Fri Mar 16 08:05:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 08:05:48 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Mar 16 08:05:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Mar 16 08:05:48 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Mar 16 08:05:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Mar 16 08:05:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 08:36:57 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.491792 pixels away
[Fri Mar 16 08:36:57 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 08:36:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 08:36:57 2012] Assessing source extent using major
[Fri Mar 16 08:36:57 2012] Source does appear to be extended
[Fri Mar 16 08:36:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 09:15:59 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 09:15:59 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Fri Mar 16 09:15:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.110
[Fri Mar 16 09:15:59 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.13"
[Fri Mar 16 09:43:32 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src5.ximg exists
[Fri Mar 16 09:43:32 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Mar 16 09:43:32 2012] Fit fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src5 appears to have run properly
[Fri Mar 16 09:43:32 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Mar 16 09:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Mar 16 09:43:32 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Mar 16 09:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Mar 16 09:43:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:22:57 2012] Source 4 is offset by -5.070963 and 4.307443 pixels which is larger than
2 X fitted extent = 0.663724 x 0.663724, not incorporating fit results
[Fri Mar 16 10:22:57 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:22:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:22:57 2012] Assessing source extent using major
[Fri Mar 16 10:22:57 2012] Source does appear to be extended
[Fri Mar 16 10:22:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 11:10:01 2012] XMMSAS src. selection expression = ellipse(22244.278259, 31271.295563, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 11:10:01 2012] Writing source region out to fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 16 11:10:01 2012] Extracting stamp from image fullrun_mos1_xmm0203050501_pi300-10000_cl_sm2.00.img.gz, (219, 322) - (294, 397)
[Fri Mar 16 11:10:01 2012] XMMSAS bgd. selection expression = annulus(22244.278259, 31271.295563, 1087.500000, 2175.000000, X, Y) && !ellipse(19365.175110, 29089.793396, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 11:10:01 2012] Writing fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src4.gif
[Fri Mar 16 11:12:07 2012] Mean detx,y = (3081.41, -6095.57) 
[Fri Mar 16 11:12:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:12:41 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:12:41 2012] Setting source spectrum file to fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 11:12:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 16 11:24:40 2012] Not generating rmf since there are only 91 counts
[Fri Mar 16 11:24:40 2012] rmf not generated due to insufficient counts
[Fri Mar 16 11:40:33 2012] Updating aperture counts using extracted products
[Fri Mar 16 11:40:33 2012] Error reading totcts from fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 11:40:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:40:34 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src4.arf
[Fri Mar 16 11:40:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:40:34 2012] Updating source flux to 1.4e-13
[Fri Mar 16 11:40:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting