[Fri Mar 16 06:58:21 2012] Detection parameters:
  Position = (315.6, 314.3) = 20 50 17.88 -5 36 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3214.1 +/- 67.5
  Background counts = 5.5
  Rate = 0.3 +/- 0.005

[Fri Mar 16 06:58:21 2012] Off-axis axis estimate = 1.69'
[Fri Mar 16 07:37:59 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 07:37:59 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Mar 16 07:37:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Fri Mar 16 07:37:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Mar 16 08:05:47 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 16 08:05:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 08:05:47 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 16 08:05:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 08:05:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 08:05:48 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 16 08:05:48 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 16 08:05:48 2012] Fit fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Mar 16 08:36:57 2012] Spatial fit model total counts = 2888.000000, observed total counts = 2888.000000
[Fri Mar 16 08:36:57 2012] Offset between fit and detection position for source 3 = 0.252059 pixels
[Fri Mar 16 08:36:57 2012] 2895.603000 total counts/ 651.463000 bgd. counts: snr = 87.923521
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.252059 pixels
  Position = (315.5, 314.5) = 20 50 17.92 -5 36 26.4
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2244.1 +/- 53.8
  Background counts = 651.5
  Rate = 0.2 +/- 0.004
[Fri Mar 16 08:36:57 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 08:36:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 08:36:57 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 08:36:57 2012] Source does appear to be extended
[Fri Mar 16 08:36:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 09:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 09:15:59 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Fri Mar 16 09:15:59 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.723
[Fri Mar 16 09:15:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.50"
[Fri Mar 16 09:43:31 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 09:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 09:43:31 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 09:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 09:43:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 09:43:32 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 09:43:32 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 09:43:32 2012] Fit fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 16 10:22:57 2012] Spatial fit model total counts = 2888.000000, observed total counts = 2888.000000
[Fri Mar 16 10:22:57 2012] Offset between fit and detection position for source 3 = 0.000000 pixels
[Fri Mar 16 10:22:57 2012] 2895.603000 total counts/ 651.463000 bgd. counts: snr = 87.923521
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000000 pixels
  Position = (315.5, 314.5) = 20 50 17.92 -5 36 26.4
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2244.1 +/- 53.8
  Background counts = 651.5
  Rate = 0.2 +/- 0.004
[Fri Mar 16 10:22:57 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:22:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:22:57 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:22:57 2012] Source does appear to be extended
[Fri Mar 16 10:22:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 11:10:01 2012] Counts = 2244.140000, rescaling region sizes by 2.000000
[Fri Mar 16 11:10:01 2012] XMMSAS src. selection expression = ellipse(27398.276000, 27309.500200, 659.754019, 659.754019, 0.000000, X, Y)
[Fri Mar 16 11:10:01 2012] Writing source region out to fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src3_src.reg
[Fri Mar 16 11:10:01 2012] Extracting stamp from image fullrun_mos1_xmm0203050501_pi300-10000_cl_sm2.00.img.gz, (278, 277) - (353, 352)
[Fri Mar 16 11:10:01 2012] XMMSAS bgd. selection expression = annulus(27398.276000, 27309.500200, 2199.180063, 4398.360127, X, Y) && !ellipse(22244.278259, 31271.295563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24021.390200, 26994.995360, 461.952813, 461.952813, 0.000000, X, Y) && !ellipse(25331.910065, 28819.421143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.497800, 27762.058600, 427.128812, 427.128812, 0.000000, X, Y)
[Fri Mar 16 11:10:01 2012] Writing fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src3.gif
[Fri Mar 16 11:10:04 2012] Mean detx,y = (271.10, -215.29) 
[Fri Mar 16 11:10:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:10:27 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:10:27 2012] Setting source spectrum file to fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 16 11:10:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Mar 16 11:40:33 2012] Updating aperture counts using extracted products
[Fri Mar 16 11:40:33 2012] Error reading totcts from fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 16 11:40:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:40:34 2012] Using photon index=1.80, rate=0.178, arf fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src3.arf
[Fri Mar 16 11:40:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:40:34 2012] Updating source flux to 1.7e-12
[Fri Mar 16 11:40:55 2012] Reading fit data from xmm0203050501/analysis//spectral/fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src3_pl.csv
[Fri Mar 16 11:40:55 2012] Spectral fit parameter nH value = 5.60094e+20
[Fri Mar 16 11:40:55 2012] Spectral fit parameter PhoIndex value = 1.31494
[Fri Mar 16 11:40:55 2012] Failed to get F(0.3-8.0) from xmm0203050501/analysis//spectral/fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 11:40:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:40:55 2012] Using Nh = 5.6e+20, photon index=1.31, rate=0.178, arf fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src3.arf
[Fri Mar 16 11:40:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:40:55 2012] Updating source flux to 2.3e-12