[Fri Mar 16 06:58:21 2012] Detection parameters:
  Position = (386.3, 248.8) = 20 49 57.28 -5 41 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.9 +/- 12.9
  Background counts = 4.7
  Rate = 0.01 +/- 0.001

[Fri Mar 16 06:58:21 2012] Off-axis axis estimate = 7.32'
[Fri Mar 16 07:37:59 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 07:37:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 07:37:59 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Fri Mar 16 07:37:59 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.944
[Fri Mar 16 07:37:59 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.09"
[Fri Mar 16 08:05:47 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src2.ximg exists
[Fri Mar 16 08:05:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src2.csv
[Fri Mar 16 08:05:47 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Mar 16 08:05:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src2.csv
[Fri Mar 16 08:05:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 08:05:48 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Mar 16 08:05:48 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Mar 16 08:05:48 2012] Fit fullrun_mos1_xmm0203050501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Mar 16 08:36:57 2012] Spatial fit model total counts = 137.710000, observed total counts = 126.000000
[Fri Mar 16 08:36:57 2012] Offset between fit and detection position for source 2 = 0.201573 pixels
[Fri Mar 16 08:36:57 2012] 136.646600 total counts/ 58.774400 bgd. counts: snr = 10.157535
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.201573 pixels
  Position = (386.2, 248.6) = 20 49 57.31 -5 41 12.9
  Extent = 5.4 (4.5-6.6)", rotation angle = 0
  Source counts = 77.9 +/- 11.7
  Background counts = 58.8
  Rate = 0.006 +/- 0.0009
[Fri Mar 16 08:36:57 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 08:36:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 08:36:57 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 08:36:57 2012] Source does appear to be extended
[Fri Mar 16 08:36:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 09:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 09:15:59 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Fri Mar 16 09:15:59 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.987
[Fri Mar 16 09:15:59 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.41"
[Fri Mar 16 09:43:31 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src2.ximg exists
[Fri Mar 16 09:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src2.csv
[Fri Mar 16 09:43:31 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Mar 16 09:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src2.csv
[Fri Mar 16 09:43:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 09:43:32 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Mar 16 09:43:32 2012] fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Mar 16 09:43:32 2012] Fit fullrun_mos1_xmm0203050501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Mar 16 10:22:57 2012] Spatial fit model total counts = 137.868000, observed total counts = 126.000000
[Fri Mar 16 10:22:57 2012] Offset between fit and detection position for source 2 = 0.008385 pixels
[Fri Mar 16 10:22:57 2012] 136.771400 total counts/ 59.142800 bgd. counts: snr = 10.094175
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008385 pixels
  Position = (386.2, 248.6) = 20 49 57.31 -5 41 12.9
  Extent = 5.4 (4.5-6.6)", rotation angle = 0
  Source counts = 77.6 +/- 11.7
  Background counts = 59.1
  Rate = 0.006 +/- 0.0009
[Fri Mar 16 10:22:57 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:22:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:22:57 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:22:57 2012] Source does appear to be extended
[Fri Mar 16 10:22:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 11:10:01 2012] XMMSAS src. selection expression = ellipse(33552.363700, 21579.603600, 322.411324, 322.411324, 0.000000, X, Y)
[Fri Mar 16 11:10:01 2012] Writing source region out to fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src2_src.reg
[Fri Mar 16 11:10:01 2012] Extracting stamp from image fullrun_mos1_xmm0203050501_pi300-10000_cl_sm2.00.img.gz, (368, 230) - (405, 267)
[Fri Mar 16 11:10:01 2012] XMMSAS bgd. selection expression = annulus(33552.363700, 21579.603600, 537.352207, 1074.704415, X, Y)
[Fri Mar 16 11:10:01 2012] Writing fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src2.gif
[Fri Mar 16 11:10:31 2012] Mean detx,y = (-4023.57, 7012.28) 
[Fri Mar 16 11:10:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:10:52 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:10:52 2012] Setting source spectrum file to fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar 16 11:10:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Mar 16 11:24:05 2012] Not generating rmf since there are only 77 counts
[Fri Mar 16 11:24:05 2012] rmf not generated due to insufficient counts
[Fri Mar 16 11:40:33 2012] Updating aperture counts using extracted products
[Fri Mar 16 11:40:33 2012] Error reading totcts from fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar 16 11:40:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:40:34 2012] Using photon index=1.80, rate=0.00617, arf fullrun_mos1_xmm0203050501_pi300-10000_pass1_cl_src2.arf
[Fri Mar 16 11:40:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:40:34 2012] Updating source flux to 9.2e-14
[Fri Mar 16 11:40:38 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting