Source List

Observation details report
Detailed source parameters (including errors) in a comma-separated values file

Click on source number for detailed analysis, including spectral fits if applicable

data idnum idradec telescope instrument x y cnts cntserr rate rateerr SNR poisprob sigmaj sigmin incang offax cnts_soft cnts_hard hr hr_err ext var N_H flux vign flags
Report srcpi bgdpi arf 1 X144659.96+025328.7 xmm pn 291.422 275.403 60.3296 9.68946 0.228595 0.0367144 10.4147 1 4.85303 4.85303 0 1.71869 29.3436 28.4247 -0.0159072 0.152529 F T 3.16e+20 7.63596e-13 1 dsx
Report srcpi bgdpi arf rmf 1 X144659.92+025329.8 xmm mos1 291.539 275.659 429.281 24.5028 0.0932124 0.00532044 32.8177 1 5.27217 5.27217 0 1.7167 198.221 223.212 0.0592984 0.0521245 F T 3.16e+20 1.11523e-12 1 dsx
Report srcpi bgdpi arf rmf 1 X144659.89+025330.3 xmm mos2 291.646 275.76 404.105 24.3526 0.0876963 0.00528484 29.3988 1 5.24065 4.60072 340.91 1.71013 178.549 210.203 0.0814249 0.0545195 F T 3.16e+20 1.14502e-12 1 dbsx
Report srcpi bgdpi arf 2 X144649.58+025133.1 xmm mos2 327.169 248.83 14.0894 9.10864 0.00305759 0.0019767 1.97464 0.976123 10.875 10.875 0 4.15619 7.35996 1.99143 -0.574089 1.06237 F F 3.17e+20 3.91006e-14 1 dx

counts and rate are bgd.-subtracted, based on simple spatial fitting (if done) or extracted counts from aperture otherwise (N.B., in either case aperture counts are given csv file).
cntserr, rateerr = Error on (source) counts and count rate, based on error in total counts
SNR = signal-to-noise ratio, computed using Nsrc/sqrt(Nbgd)
poisprob = Poisson probability of observing total counts given bgd. counts
sigmaj, sigmin = source extent (from detection output or spatial fitting) in units of arcsecs.
incang = position angle of source (inclination from x-axis)
cnts_soft = bgd.-subtracted counts in soft band (0.50 - 2.00 KeV, always taken directly from source aperture rather than model fitting)
cnts_hard = bgd.-subtracted counts in hard band (2.00 - 10.00 KeV, always taken directly from source aperture rather than model fitting)
hr, hr_err = hardness ratio ([cnts_hard-cnts_soft]/[cnts_hard+cnts_soft]) and error
ext = source extension flag: F = false (not extended), A = true (extended), A = asymetric (ratio of sigmaj/sigmin > 1 + x, where x = 0.5 by default)
var = variability flag: U = unknown, F = false (is not variable), T = true
N_H = Galactic column density as determined from LHEASOFT nh program
flux = flux determined from count rate using pimms (in the 0.30-8.00 keV bandpass for a power-law model with ph. index = 1.8)
vign = vignetting correction
Flags: d = detection parameters, s = simple spatial fitting parameters, b = simple spatial fitting failed, p = poor simple spatial fit, x = extracted events parameters, t = temporal anaylsis parameters, i = psf spatial fitting parameters, f = spectral fitting parameters, c = source is confused, u = user-defined source, v = detected source coincident with user-defined source, r = source is in region-of-interest