[Mon May  6 21:20:47 2013] Detection parameters:
  Position = (236.3, 119.4) = 14 47 15.97 2 42 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.1 +/- 12.6
  Background counts = 28.7
  Rate = 0.02 +/- 0.003

[Mon May  6 21:20:47 2013] Off-axis axis estimate = 13.74'
[Mon May  6 21:21:16 2013] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Mon May  6 21:21:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  6 21:21:16 2013] Initial guess for spatial extent in simple fitting = 13.30"
[Mon May  6 21:21:16 2013] source mask rpix=3.1, npix_max = 50, mask sum = 47, frac = 0.928
[Mon May  6 21:21:16 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 13.30"
[Mon May  6 21:23:50 2013] fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_src2.ximg exists
[Mon May  6 21:23:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_src2.csv
[Mon May  6 21:23:50 2013] fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May  6 21:23:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_src2.csv
[Mon May  6 21:23:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 21:23:50 2013] fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May  6 21:23:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May  6 21:23:50 2013] fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May  6 21:23:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May  6 21:23:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203050401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 21:26:22 2013] Spatial fit model total counts = 19.340500, observed total counts = 17.000000
[Mon May  6 21:26:22 2013] Offset between fit and detection position for source 2 = 1.459130 pixels
[Mon May  6 21:26:22 2013] 20.046990 total counts/ 12.297300 bgd. counts: snr = 2.209935
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.459130 pixels
  Position = (235.6, 120.7) = 14 47 16.17 2 42 15.6
  Extent = 5.2 (3.3-7.1)", rotation angle = 0
  Source counts = 7.7 +/- 4.5
  Background counts = 12.3
  Rate = 0.03 +/- 0.02
[Mon May  6 21:26:22 2013] Vigneting correction estimate = 1.000000
[Mon May  6 21:26:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 21:26:22 2013] Assessing source extent using major axis lower bound
[Mon May  6 21:26:22 2013] Source does appear to be extended
[Mon May  6 21:26:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 21:26:22 2013] Deleting source due to low Poisson probability 0.9