[Wed May 1 00:56:07 2013] Detection parameters: Position = (287.0, 308.0) = 12 59 27.40 -4 12 47.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 407.2 +/- 33.2 Background counts = 182.6 Rate = 0.04 +/- 0.003 [Wed May 1 00:56:09 2013] Off-axis axis estimate = 1.09' [Wed May 1 00:57:34 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting [Wed May 1 00:57:34 2013] Initial guess for spatial extent in simple fitting = 6.97" [Wed May 1 00:57:34 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.905 [Wed May 1 00:57:34 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 6.97" [Wed May 1 02:06:42 2013] fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_src30.ximg exists [Wed May 1 02:06:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_src30.csv [Wed May 1 02:06:42 2013] fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_src30_1.ximg exists [Wed May 1 02:06:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_src30.csv [Wed May 1 02:06:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:06:43 2013] fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists [Wed May 1 02:06:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_tfrozen_src30.csv [Wed May 1 02:06:43 2013] fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists [Wed May 1 02:06:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_tfrozen_src30.csv [Wed May 1 02:06:43 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203020101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:11:04 2013] Source 32 is offset by -6.448720 and -7.365956 pixels which is larger than 2 X fitted extent = 6.410207 x 4.199490, not incorporating fit results [Wed May 1 04:11:04 2013] Source 32 is offset by -2.460145 and 5.622618 pixels which is larger than 2 X fitted extent = 3.583963 x 3.583963, not incorporating fit results [Wed May 1 04:11:04 2013] Vigneting correction estimate = 1.000000 [Wed May 1 04:11:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 04:11:04 2013] Assessing source extent using major [Wed May 1 04:11:04 2013] Source does appear to be extended [Wed May 1 04:11:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 04:11:22 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting [Wed May 1 04:11:22 2013] Initial guess for spatial extent in simple fitting = 6.97" [Wed May 1 04:11:22 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.905 [Wed May 1 04:11:22 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 6.97" [Wed May 1 05:00:25 2013] fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_src21.ximg exists [Wed May 1 05:00:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_src21.csv [Wed May 1 05:00:25 2013] fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_src21_1.ximg exists [Wed May 1 05:00:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_src21.csv [Wed May 1 05:00:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_src21_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 05:00:25 2013] fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists [Wed May 1 05:00:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_tfrozen_src21.csv [Wed May 1 05:00:25 2013] fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists [Wed May 1 05:00:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_tfrozen_src21.csv [Wed May 1 05:00:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0203020101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 07:16:22 2013] Spatial fit model total counts = 4014.260000, observed total counts = 3518.000000 [Wed May 1 07:16:22 2013] Poor agreement between spatial fit and data for source 32 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 07:16:22 2013] Source 32 is offset by -2.055410 and 5.622618 pixels which is larger than 2 X fitted extent = 3.786235 x 3.786235, not incorporating fit results [Wed May 1 07:16:22 2013] Vigneting correction estimate = 1.000000 [Wed May 1 07:16:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 07:16:22 2013] Assessing source extent using major [Wed May 1 07:16:22 2013] Source does appear to be extended [Wed May 1 07:16:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 07:16:37 2013] XMMSAS src. selection expression = ellipse(24917.149353, 26751.349792, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 07:16:37 2013] Writing source region out to fullrun_pn_xmm0203020101_pi300-10000_pass1_cl_src32_src.reg [Wed May 1 07:16:37 2013] Extracting stamp from image fullrun_pn_xmm0203020101_pi300-10000_cl_sm2.00.img.gz, (249, 271) - (324, 346) [Wed May 1 07:16:37 2013] XMMSAS bgd. selection expression = annulus(24917.149353, 26751.349792, 1087.500000, 2175.000000, X, Y) && !ellipse(26413.074460, 27882.123200, 1163.320033, 1163.320033, 0.000000, X, Y) && !ellipse(25871.932404, 29128.466553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26721.172729, 29507.671112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24386.140839, 28835.598236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24260.157043, 28340.374207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23894.015228, 27083.687775, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 1 07:16:37 2013] Writing fullrun_pn_xmm0203020101_pi300-10000_pass1_cl_src32.gif [Wed May 1 07:26:23 2013] Mean detx,y = (-1522.04, 294.27) [Wed May 1 07:26:25 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 07:26:40 2013] Binned source spectrum to 10 counts/bin [Wed May 1 07:26:40 2013] Setting source spectrum file to fullrun_pn_xmm0203020101_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Wed May 1 07:26:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0203020101_pi300-10000_pass1_cl_src32_bgd.pi.gz [Wed May 1 09:46:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 09:46:55 2013] rmf not generated due to insufficient counts [Wed May 1 12:13:49 2013] Updating aperture counts using extracted products [Wed May 1 12:13:49 2013] Total counts from fullrun_pn_xmm0203020101_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 2405.00 [Wed May 1 12:13:49 2013] Total counts from fullrun_pn_xmm0203020101_pi300-10000_pass1_cl_src32_bgd.pi.gz = 6428.00 [Wed May 1 12:13:49 2013] Got source and background scale factors 1160778.000000, 5085346.000000 [Wed May 1 12:13:49 2013] User source parameters: Position = (287.0, 308.0) = 12 59 27.40 -4 12 47.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 937.7 +/- 50.0 Background aperture counts = 1467.3 Rate = 0.1 +/- 0.005 [Wed May 1 12:13:49 2013] Updating counts from extracted products [Wed May 1 12:13:49 2013] Set source signif. to 937.75/38.30 = 24.48 [Wed May 1 12:13:50 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 12:13:50 2013] Using photon index=1.80, rate=0.0965, arf fullrun_pn_xmm0203020101_pi300-10000_pass1_cl_src32.arf [Wed May 1 12:13:50 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 12:13:50 2013] Updating source flux to 3e-13 [Wed May 1 12:14:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 12:14:07 2013] xmm0203020101/analysis//spectral/fullrun_pn_xmm0203020101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete