[Tue Jun 19 02:24:50 2012] Detection parameters:
  Position = (290.5, 275.9) = 15 35 53.15 -14 13 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9897.2 +/- 119.0
  Background counts = 72.7
  Rate = 0.6 +/- 0.007

[Tue Jun 19 02:24:51 2012] Off-axis axis estimate = 1.73'
[Tue Jun 19 02:26:59 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 02:26:59 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Jun 19 02:26:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Tue Jun 19 02:26:59 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Tue Jun 19 02:53:48 2012] fullrun_pn_xmm0202890101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 19 02:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202890101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 19 02:53:48 2012] fullrun_pn_xmm0202890101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 19 02:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202890101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 19 02:53:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202890101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202890101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 02:53:49 2012] fullrun_pn_xmm0202890101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 19 02:53:49 2012] fullrun_pn_xmm0202890101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 19 02:53:49 2012] Fit fullrun_pn_xmm0202890101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 19 03:36:18 2012] Spatial fit model total counts = 7015.080000, observed total counts = 6953.000000
[Tue Jun 19 03:36:18 2012] Offset between fit and detection position for source 3 = 0.077498 pixels
[Tue Jun 19 03:36:18 2012] 7040.800000 total counts/ 1706.010000 bgd. counts: snr = 129.159556
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.077498 pixels
  Position = (290.5, 275.8) = 15 35 53.15 -14 13 12.7
  Extent = 5.8 (5.7-6.0)", rotation angle = 0
  Source counts = 5334.8 +/- 83.9
  Background counts = 1706.0
  Rate = 0.4 +/- 0.007
[Tue Jun 19 03:36:18 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 03:36:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 03:36:18 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 03:36:18 2012] Source does appear to be extended
[Tue Jun 19 03:36:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 03:36:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 03:36:32 2012] Initial guess for spatial extent in simple fitting = 5.82"
[Tue Jun 19 03:36:32 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.888
[Tue Jun 19 03:36:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.82"
[Tue Jun 19 04:08:02 2012] fullrun_pn_xmm0202890101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 19 04:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202890101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 19 04:08:02 2012] fullrun_pn_xmm0202890101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 19 04:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202890101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 19 04:08:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202890101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202890101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 04:08:03 2012] fullrun_pn_xmm0202890101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 19 04:08:03 2012] fullrun_pn_xmm0202890101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 19 04:08:03 2012] Fit fullrun_pn_xmm0202890101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 19 04:54:31 2012] Spatial fit model total counts = 7013.300000, observed total counts = 6953.000000
[Tue Jun 19 04:54:31 2012] Offset between fit and detection position for source 3 = 0.000672 pixels
[Tue Jun 19 04:54:31 2012] 7038.890000 total counts/ 1702.500000 bgd. counts: snr = 129.331407
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000672 pixels
  Position = (290.5, 275.8) = 15 35 53.15 -14 13 12.7
  Extent = 5.8 (5.7-6.0)", rotation angle = 0
  Source counts = 5336.4 +/- 83.9
  Background counts = 1702.5
  Rate = 0.4 +/- 0.007
[Tue Jun 19 04:54:31 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 04:54:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 04:54:31 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 04:54:31 2012] Source does appear to be extended
[Tue Jun 19 04:54:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 04:54:44 2012] Counts = 5336.390000, rescaling region sizes by 2.000000
[Tue Jun 19 04:54:44 2012] XMMSAS src. selection expression = ellipse(25222.666000, 23948.965320, 699.748820, 699.748820, 0.000000, X, Y)
[Tue Jun 19 04:54:44 2012] Writing source region out to fullrun_pn_xmm0202890101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 19 04:54:44 2012] Extracting stamp from image fullrun_pn_xmm0202890101_pi300-10000_cl_sm2.00.img.gz, (250, 236) - (331, 316)
[Tue Jun 19 04:54:44 2012] XMMSAS bgd. selection expression = annulus(25222.666000, 23948.965320, 2332.496067, 4664.992134, X, Y) && !ellipse(23258.038040, 26144.949620, 315.680009, 315.680009, 0.000000, X, Y) && !ellipse(29596.160583, 25966.504547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28216.189800, 25169.654860, 769.603174, 769.603174, 0.000000, X, Y) && !ellipse(25359.487854, 22757.492767, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 04:54:44 2012] Writing fullrun_pn_xmm0202890101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 19 04:57:06 2012] Mean detx,y = (127.52, -243.86) 
[Tue Jun 19 04:57:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 04:57:51 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 04:57:51 2012] Setting source spectrum file to fullrun_pn_xmm0202890101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 19 04:57:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202890101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 19 05:57:36 2012] Updating aperture counts using extracted products
[Tue Jun 19 05:57:36 2012] Error reading totcts from fullrun_pn_xmm0202890101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 19 05:57:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 05:57:36 2012] Using photon index=1.80, rate=0.447, arf fullrun_pn_xmm0202890101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 19 05:57:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 05:57:36 2012] Updating source flux to 1.1e-12
[Tue Jun 19 05:58:38 2012] Reading fit data from xmm0202890101/analysis//spectral/fullrun_pn_xmm0202890101_pi300-10000_pass1_cl_src3_pl.csv
[Tue Jun 19 05:58:38 2012] Spectral fit parameter nH value = 1.33964e+21
[Tue Jun 19 05:58:38 2012] Spectral fit parameter PhoIndex value = 2.11607
[Tue Jun 19 05:58:38 2012] Failed to get F(0.3-8.0) from xmm0202890101/analysis//spectral/fullrun_pn_xmm0202890101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Jun 19 05:58:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 05:58:38 2012] Using Nh = 1.3e+21, photon index=2.12, rate=0.447, arf fullrun_pn_xmm0202890101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 19 05:58:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 05:58:38 2012] Updating source flux to 1.2e-12