[Thu Aug 23 22:37:31 2012] Detection parameters:
  Position = (246.2, 306.1) = 17 51 38.08 -30 38 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 18.5
  Background counts = 116.6
  Rate = 0.01 +/- 0.003

[Thu Aug 23 22:37:31 2012] Off-axis axis estimate = 3.83'
[Thu Aug 23 22:40:24 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 22:40:24 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Thu Aug 23 22:40:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Thu Aug 23 22:40:24 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.34"
[Thu Aug 23 23:40:01 2012] fullrun_pn_xmm0202790101_pi300-10000_cl_pass0_src23.ximg exists
[Thu Aug 23 23:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202790101_pi300-10000_cl_pass0_src23.csv
[Thu Aug 23 23:40:01 2012] fullrun_pn_xmm0202790101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Aug 23 23:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202790101_pi300-10000_cl_pass0_src23.csv
[Thu Aug 23 23:40:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202790101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202790101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 23:40:01 2012] fullrun_pn_xmm0202790101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Aug 23 23:40:01 2012] fullrun_pn_xmm0202790101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Aug 23 23:40:01 2012] Fit fullrun_pn_xmm0202790101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Aug 23 23:52:12 2012] Warning, spatial fit 23 centroid is now closest to src. 21
[Thu Aug 23 23:52:12 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 23:52:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 23:52:12 2012] Assessing source extent using major
[Thu Aug 23 23:52:12 2012] Source does appear to be extended
[Thu Aug 23 23:52:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 23:52:20 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 23:52:20 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Thu Aug 23 23:52:20 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Thu Aug 23 23:52:20 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.34"
[Fri Aug 24 00:39:56 2012] fullrun_pn_xmm0202790101_pi300-10000_cl_pass1_src22.ximg exists
[Fri Aug 24 00:39:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202790101_pi300-10000_cl_pass1_src22.csv
[Fri Aug 24 00:39:56 2012] fullrun_pn_xmm0202790101_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Aug 24 00:39:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202790101_pi300-10000_cl_pass1_src22.csv
[Fri Aug 24 00:39:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202790101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202790101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 00:39:57 2012] fullrun_pn_xmm0202790101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Aug 24 00:39:57 2012] fullrun_pn_xmm0202790101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Aug 24 00:39:57 2012] Fit fullrun_pn_xmm0202790101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Aug 24 00:53:03 2012] Warning, spatial fit 22 centroid is now closest to src. 19
[Fri Aug 24 00:53:03 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 10.995805 pixels away
[Fri Aug 24 00:53:03 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 00:53:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 00:53:03 2012] Assessing source extent using major
[Fri Aug 24 00:53:03 2012] Source does appear to be extended
[Fri Aug 24 00:53:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 00:53:12 2012] XMMSAS src. selection expression = ellipse(21367.912827, 26579.253448, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 00:53:12 2012] Writing source region out to fullrun_pn_xmm0202790101_pi300-10000_pass1_cl_src24_src.reg
[Fri Aug 24 00:53:12 2012] Extracting stamp from image fullrun_pn_xmm0202790101_pi300-10000_cl_sm2.00.img.gz, (209, 269) - (284, 344)
[Fri Aug 24 00:53:12 2012] XMMSAS bgd. selection expression = annulus(21367.912827, 26579.253448, 1087.500000, 2175.000000, X, Y) && !ellipse(22963.021240, 27938.147888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24098.309113, 27951.826599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20993.898849, 27896.105499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24215.374664, 27528.341461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22112.862274, 27467.164276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21267.662903, 27296.509613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23405.816406, 27113.835632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24379.059875, 27088.989868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22546.680786, 26512.954712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23413.149597, 25875.991943, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 00:53:12 2012] Writing fullrun_pn_xmm0202790101_pi300-10000_pass1_cl_src24.gif
[Fri Aug 24 01:04:40 2012] Mean detx,y = (-5600.12, 784.67) 
[Fri Aug 24 01:04:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 01:04:56 2012] grppha failed
[Fri Aug 24 01:04:56 2012] Setting source spectrum file to fullrun_pn_xmm0202790101_pi300-10000_pass1_cl_src24_src.pi.gz
[Fri Aug 24 01:04:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202790101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Aug 24 01:07:29 2012] Not generating rmf since there are only 79 counts
[Fri Aug 24 01:07:29 2012] rmf not generated due to insufficient counts
[Fri Aug 24 01:11:45 2012] Updating aperture counts using extracted products
[Fri Aug 24 01:11:45 2012] Error reading totcts from fullrun_pn_xmm0202790101_pi300-10000_pass1_cl_src24_src.pi.gz
[Fri Aug 24 01:11:45 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 01:11:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 01:11:49 2012] xmm0202790101/analysis//spectral/fullrun_pn_xmm0202790101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete