[Tue Oct  4 16:57:33 2011] Detection parameters:
  Position = (414.3, 253.7) = 10 21 45.00 21 29 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 751.0 +/- 33.8
  Background counts = 39.4
  Rate = 0.04 +/- 0.002

[Tue Oct  4 16:57:34 2011] Off-axis axis estimate = 9.01'
[Tue Oct  4 17:00:25 2011] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 17:00:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 17:00:25 2011] Initial guess for spatial extent in simple fitting = 10.93"
[Tue Oct  4 17:00:25 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Tue Oct  4 17:00:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.93"
[Tue Oct  4 18:02:54 2011] fullrun_pn_xmm0202730101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Oct  4 18:02:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202730101_pi300-10000_cl_pass0_src1.csv
[Tue Oct  4 18:02:54 2011] fullrun_pn_xmm0202730101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Oct  4 18:02:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202730101_pi300-10000_cl_pass0_src1.csv
[Tue Oct  4 18:02:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202730101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202730101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 18:02:55 2011] fullrun_pn_xmm0202730101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 18:02:55 2011] fullrun_pn_xmm0202730101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 18:02:55 2011] Fit fullrun_pn_xmm0202730101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 19:24:10 2011] Spatial fit model total counts = 1138.030000, observed total counts = 1139.000000
[Tue Oct  4 19:24:10 2011] Offset between fit and detection position for source 1 = 0.261199 pixels
[Tue Oct  4 19:24:10 2011] 1131.148000 total counts/ 585.726000 bgd. counts: snr = 22.536445
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.261199 pixels
  Position = (414.1, 253.6) = 10 21 45.07 21 29 56.6
  Extent = 6.0 (5.5-6.5)", rotation angle = 0
  Source counts = 545.4 +/- 33.6
  Background counts = 585.7
  Rate = 0.02 +/- 0.001
[Tue Oct  4 19:24:10 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 19:24:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 19:24:10 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 19:24:10 2011] Source does appear to be extended
[Tue Oct  4 19:24:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 19:24:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 19:24:33 2011] Initial guess for spatial extent in simple fitting = 6.01"
[Tue Oct  4 19:24:33 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.847
[Tue Oct  4 19:24:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.01"
[Tue Oct  4 20:50:22 2011] fullrun_pn_xmm0202730101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Oct  4 20:50:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202730101_pi300-10000_cl_pass1_src1.csv
[Tue Oct  4 20:50:22 2011] fullrun_pn_xmm0202730101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Oct  4 20:50:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202730101_pi300-10000_cl_pass1_src1.csv
[Tue Oct  4 20:50:22 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202730101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202730101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 20:50:22 2011] fullrun_pn_xmm0202730101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 20:50:22 2011] fullrun_pn_xmm0202730101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 20:50:22 2011] Fit fullrun_pn_xmm0202730101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 22:28:11 2011] Spatial fit model total counts = 959.002000, observed total counts = 959.000000
[Tue Oct  4 22:28:11 2011] Offset between fit and detection position for source 1 = 0.003921 pixels
[Tue Oct  4 22:28:11 2011] 955.147000 total counts/ 423.618000 bgd. counts: snr = 25.824966
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003921 pixels
  Position = (414.1, 253.6) = 10 21 45.07 21 29 56.6
  Extent = 5.8 (5.3-6.3)", rotation angle = 0
  Source counts = 531.5 +/- 30.9
  Background counts = 423.6
  Rate = 0.02 +/- 0.0009
[Tue Oct  4 22:28:11 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 22:28:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 22:28:11 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 22:28:11 2011] Source does appear to be extended
[Tue Oct  4 22:28:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 22:28:35 2011] XMMSAS src. selection expression = ellipse(35982.202900, 22013.561400, 350.538010, 350.538010, 0.000000, X, Y)
[Tue Oct  4 22:28:35 2011] Writing source region out to fullrun_pn_xmm0202730101_pi300-10000_pass1_cl_src1_src.reg
[Tue Oct  4 22:28:35 2011] Extracting stamp from image fullrun_pn_xmm0202730101_pi300-10000_cl_sm2.00.img.gz, (394, 233) - (434, 274)
[Tue Oct  4 22:28:35 2011] XMMSAS bgd. selection expression = annulus(35982.202900, 22013.561400, 584.230017, 1168.460034, X, Y)
[Tue Oct  4 22:28:35 2011] Writing fullrun_pn_xmm0202730101_pi300-10000_pass1_cl_src1.gif
[Tue Oct  4 22:28:49 2011] Mean detx,y = (6816.54, 8855.71) 
[Tue Oct  4 22:28:52 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Oct  4 22:29:04 2011] Binned source spectrum to 10 counts/bin
[Tue Oct  4 22:29:04 2011] Setting source spectrum file to fullrun_pn_xmm0202730101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Oct  4 22:29:04 2011] Setting bgd. spectrum file to fullrun_pn_xmm0202730101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Oct  5 00:49:44 2011] Updating aperture counts using extracted products
[Wed Oct  5 00:49:44 2011] Error reading totcts from fullrun_pn_xmm0202730101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 00:49:45 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:49:45 2011] Using photon index=1.80, rate=0.0162, arf fullrun_pn_xmm0202730101_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 00:49:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 00:49:45 2011] Updating source flux to 8.3e-14
[Wed Oct  5 00:52:54 2011] Reading fit data from xmm0202730101/analysis//spectral/fullrun_pn_xmm0202730101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Oct  5 00:52:54 2011] Spectral fit parameter nH value = 1.06842e+22
[Wed Oct  5 00:52:54 2011] Spectral fit parameter PhoIndex value = 9.98
[Wed Oct  5 00:52:54 2011] Failed to get F(0.3-8.0) from xmm0202730101/analysis//spectral/fullrun_pn_xmm0202730101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 00:52:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:52:54 2011] Using Nh = 1.1e+22, photon index=9.98, rate=0.0162, arf fullrun_pn_xmm0202730101_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 00:52:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 00:52:54 2011] Updating source flux to 4.6e-14