[Tue Oct  4 16:58:26 2011] Detection parameters:
  Position = (454.2, 271.9) = 10 21 32.56 21 31 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.1 +/- 9.7
  Background counts = 15.2
  Rate = 0.001 +/- 0.0003

[Tue Oct  4 16:58:26 2011] Off-axis axis estimate = 11.46'
[Tue Oct  4 18:40:17 2011] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 18:40:17 2011] Initial guess for spatial extent in simple fitting = 12.16"
[Tue Oct  4 18:40:17 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.967
[Tue Oct  4 18:40:17 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 12.16"
[Tue Oct  4 19:24:01 2011] fullrun_mos2_xmm0202730101_pi300-10000_cl_pass0_src30.ximg exists
[Tue Oct  4 19:24:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202730101_pi300-10000_cl_pass0_src30.csv
[Tue Oct  4 19:24:01 2011] fullrun_mos2_xmm0202730101_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Oct  4 19:24:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202730101_pi300-10000_cl_pass0_src30.csv
[Tue Oct  4 19:24:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202730101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202730101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 19:24:01 2011] fullrun_mos2_xmm0202730101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Oct  4 19:24:01 2011] fullrun_mos2_xmm0202730101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Oct  4 19:24:01 2011] Fit fullrun_mos2_xmm0202730101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Oct  4 19:24:21 2011] Spatial fit model total counts = 140.999000, observed total counts = 141.000000
[Tue Oct  4 19:24:21 2011] Offset between fit and detection position for source 31 = 0.300753 pixels
[Tue Oct  4 19:24:21 2011] 139.837100 total counts/ 118.103000 bgd. counts: snr = 1.999913
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.300753 pixels
  Position = (454.2, 272.2) = 10 21 32.57 21 31 17.4
  Extent = 3.8 (3.0-6.8)", rotation angle = 0
  Source counts = 21.7 +/- 11.8
  Background counts = 118.1
  Rate = 0.0006 +/- 0.0003
[Tue Oct  4 19:24:21 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 19:24:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 19:24:21 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 19:24:21 2011] Source does appear to be extended
[Tue Oct  4 19:24:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 21:39:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 21:39:47 2011] Initial guess for spatial extent in simple fitting = 3.81"
[Tue Oct  4 21:39:47 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.187
[Tue Oct  4 21:39:47 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 3.81"
[Tue Oct  4 22:28:01 2011] fullrun_mos2_xmm0202730101_pi300-10000_cl_pass1_src30.ximg exists
[Tue Oct  4 22:28:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202730101_pi300-10000_cl_pass1_src30.csv
[Tue Oct  4 22:28:01 2011] fullrun_mos2_xmm0202730101_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Oct  4 22:28:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202730101_pi300-10000_cl_pass1_src30.csv
[Tue Oct  4 22:28:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202730101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202730101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 22:28:01 2011] fullrun_mos2_xmm0202730101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Oct  4 22:28:01 2011] fullrun_mos2_xmm0202730101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Oct  4 22:28:01 2011] Fit fullrun_mos2_xmm0202730101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Oct  4 22:28:23 2011] Warning, spatial fit 30 centroid is now closest to src. 26
[Tue Oct  4 22:28:23 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 22:28:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 22:28:23 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 22:28:23 2011] Source does appear to be extended
[Tue Oct  4 22:28:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 00:19:43 2011] XMMSAS src. selection expression = ellipse(39468.515200, 23634.172800, 228.806407, 228.806407, 0.000000, X, Y)
[Wed Oct  5 00:19:43 2011] Writing source region out to fullrun_mos2_xmm0202730101_pi300-10000_pass1_cl_src31_src.reg
[Wed Oct  5 00:19:43 2011] Extracting stamp from image fullrun_mos2_xmm0202730101_pi300-10000_cl_sm2.00.img.gz, (441, 259) - (467, 285)
[Wed Oct  5 00:19:43 2011] XMMSAS bgd. selection expression = annulus(39468.515200, 23634.172800, 381.344011, 762.688022, X, Y)
[Wed Oct  5 00:19:43 2011] Writing fullrun_mos2_xmm0202730101_pi300-10000_pass1_cl_src31.gif
[Wed Oct  5 00:25:41 2011] Mean detx,y = (-10587.00, -8723.42) 
[Wed Oct  5 00:25:42 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 00:25:49 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 00:25:49 2011] Setting source spectrum file to fullrun_mos2_xmm0202730101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Oct  5 00:25:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0202730101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Oct  5 00:48:50 2011] Not generating rmf since there are only 21 counts
[Wed Oct  5 00:48:50 2011] rmf not generated due to insufficient counts
[Wed Oct  5 00:49:47 2011] Updating aperture counts using extracted products
[Wed Oct  5 00:49:47 2011] Error reading totcts from fullrun_mos2_xmm0202730101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Oct  5 00:49:47 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:49:47 2011] Using photon index=1.80, rate=0.00061, arf fullrun_mos2_xmm0202730101_pi300-10000_pass1_cl_src31.arf
[Wed Oct  5 00:49:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 00:49:47 2011] Updating source flux to 2.2e-14
[Wed Oct  5 00:50:23 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting