[Tue Oct  4 16:58:00 2011] Detection parameters:
  Position = (393.6, 326.6) = 10 21 51.45 21 35 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.6 +/- 10.5
  Background counts = 19.9
  Rate = 0.002 +/- 0.0004

[Tue Oct  4 16:58:00 2011] Off-axis axis estimate = 7.19'
[Tue Oct  4 18:02:56 2011] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 18:02:56 2011] Initial guess for spatial extent in simple fitting = 10.03"
[Tue Oct  4 18:02:56 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.795
[Tue Oct  4 18:02:56 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 10.03"
[Tue Oct  4 18:40:17 2011] fullrun_mos1_xmm0202730101_pi300-10000_cl_pass0_src24.ximg exists
[Tue Oct  4 18:40:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202730101_pi300-10000_cl_pass0_src24.csv
[Tue Oct  4 18:40:17 2011] fullrun_mos1_xmm0202730101_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue Oct  4 18:40:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202730101_pi300-10000_cl_pass0_src24.csv
[Tue Oct  4 18:40:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202730101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202730101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 18:40:17 2011] fullrun_mos1_xmm0202730101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue Oct  4 18:40:17 2011] fullrun_mos1_xmm0202730101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Oct  4 18:40:17 2011] Fit fullrun_mos1_xmm0202730101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue Oct  4 19:24:15 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 11.989195 pixels away
[Tue Oct  4 19:24:15 2011] Spatial fit model total counts = 152.874000, observed total counts = 153.000000
[Tue Oct  4 19:24:15 2011] Offset between fit and detection position for source 28 = 1.141594 pixels
[Tue Oct  4 19:24:15 2011] 148.232400 total counts/ 43.277400 bgd. counts: snr = 15.954109
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.141594 pixels
  Position = (394.1, 325.5) = 10 21 51.31 21 35 9.6
  Extent = 13.2 (5.7-18.4)", rotation angle = 0
  Source counts = 105.0 +/- 12.2
  Background counts = 43.3
  Rate = 0.003 +/- 0.0003
[Tue Oct  4 19:24:15 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 19:24:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 19:24:15 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 19:24:15 2011] Source does appear to be extended
[Tue Oct  4 19:24:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 20:50:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 20:50:23 2011] Initial guess for spatial extent in simple fitting = 13.16"
[Tue Oct  4 20:50:23 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.986
[Tue Oct  4 20:50:23 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 13.16"
[Tue Oct  4 21:39:47 2011] fullrun_mos1_xmm0202730101_pi300-10000_cl_pass1_src24.ximg exists
[Tue Oct  4 21:39:47 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202730101_pi300-10000_cl_pass1_src24.csv
[Tue Oct  4 21:39:47 2011] fullrun_mos1_xmm0202730101_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Oct  4 21:39:47 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202730101_pi300-10000_cl_pass1_src24.csv
[Tue Oct  4 21:39:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202730101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202730101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 21:39:47 2011] fullrun_mos1_xmm0202730101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Oct  4 21:39:47 2011] fullrun_mos1_xmm0202730101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Oct  4 21:39:47 2011] Fit fullrun_mos1_xmm0202730101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Oct  4 22:28:17 2011] Warning, spatial fit 24 centroid is now closest to src. 12
[Tue Oct  4 22:28:17 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 22:28:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 22:28:17 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 22:28:17 2011] Source does appear to be extended
[Tue Oct  4 22:28:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 23:52:40 2011] XMMSAS src. selection expression = ellipse(34235.022200, 28273.261200, 789.630023, 789.630023, 0.000000, X, Y)
[Tue Oct  4 23:52:40 2011] Writing source region out to fullrun_mos1_xmm0202730101_pi300-10000_pass1_cl_src28_src.reg
[Tue Oct  4 23:52:40 2011] Extracting stamp from image fullrun_mos1_xmm0202730101_pi300-10000_cl_sm2.00.img.gz, (349, 280) - (439, 371)
[Tue Oct  4 23:52:40 2011] XMMSAS bgd. selection expression = annulus(34235.022200, 28273.261200, 1316.050038, 2632.100076, X, Y) && !ellipse(35513.164185, 29875.055481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34268.931000, 29607.299700, 672.440819, 672.440819, 0.000000, X, Y) && !ellipse(31816.761400, 29108.092800, 269.286408, 269.286408, 0.000000, X, Y)
[Tue Oct  4 23:52:40 2011] Writing fullrun_mos1_xmm0202730101_pi300-10000_pass1_cl_src28.gif
[Tue Oct  4 23:58:22 2011] Mean detx,y = (-2269.29, 7193.13) 
[Tue Oct  4 23:58:23 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Oct  4 23:58:45 2011] Binned source spectrum to 10 counts/bin
[Tue Oct  4 23:58:45 2011] Setting source spectrum file to fullrun_mos1_xmm0202730101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Oct  4 23:58:45 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0202730101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed Oct  5 00:49:46 2011] Updating aperture counts using extracted products
[Wed Oct  5 00:49:46 2011] Error reading totcts from fullrun_mos1_xmm0202730101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Oct  5 00:49:46 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:49:46 2011] Using photon index=1.80, rate=0.00298, arf fullrun_mos1_xmm0202730101_pi300-10000_pass1_cl_src28.arf
[Wed Oct  5 00:49:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 00:49:46 2011] Updating source flux to 3.8e-14