[Sun May 20 02:29:09 2012] Detection parameters:
  Position = (346.4, 224.8) = 17 45 30.00 -29 7 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4714.9 +/- 87.6
  Background counts = 558.9
  Rate = 0.06 +/- 0.001

[Sun May 20 02:29:15 2012] Off-axis axis estimate = 6.37'
[Sun May 20 02:45:35 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:45:35 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Sun May 20 02:45:35 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.021
[Sun May 20 02:45:35 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.61"
[Sun May 20 11:20:59 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src26.ximg exists
[Sun May 20 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src26.csv
[Sun May 20 11:20:59 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun May 20 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src26.csv
[Sun May 20 11:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:21:02 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun May 20 11:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun May 20 11:21:02 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun May 20 11:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun May 20 11:21:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 00:16:37 2012] Warning, spatial fit 26 centroid is now closest to src. 175
[Mon May 21 00:16:39 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:16:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:16:39 2012] Assessing source extent using major
[Mon May 21 00:16:39 2012] Source does appear to be extended
[Mon May 21 00:16:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:18:31 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Mon May 21 00:18:31 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Mon May 21 00:18:31 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.021
[Mon May 21 00:18:31 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 9.61"
[Mon May 21 11:25:28 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src26.ximg exists
[Mon May 21 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src26.csv
[Mon May 21 11:25:28 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon May 21 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src26.csv
[Mon May 21 11:25:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:25:31 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon May 21 11:25:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon May 21 11:25:31 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon May 21 11:25:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon May 21 11:25:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 01:39:14 2012] Warning, spatial fit 26 centroid is now closest to src. 173
[Tue May 22 01:39:15 2012] Vigneting correction estimate = 1.000000
[Tue May 22 01:39:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 01:39:15 2012] Assessing source extent using major
[Tue May 22 01:39:15 2012] Source does appear to be extended
[Tue May 22 01:39:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 01:41:13 2012] Counts = 4714.878906, rescaling region sizes by 2.000000
[Tue May 22 01:41:13 2012] XMMSAS src. selection expression = ellipse(30086.807343, 19508.763077, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 22 01:41:13 2012] Writing source region out to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src36_src.reg
[Tue May 22 01:41:13 2012] Extracting stamp from image fullrun_pn_xmm0202670801_pi300-10000_cl_sm2.00.img.gz, (271, 150) - (421, 300)
[Tue May 22 01:41:13 2012] XMMSAS bgd. selection expression = annulus(30086.807343, 19508.763077, 4350.000000, 8700.000000, X, Y) && !ellipse(27432.196440, 27446.365800, 3520.992101, 3520.992101, 0.000000, X, Y) && !ellipse(26948.088000, 27606.520800, 3473.112100, 3473.112100, 0.000000, X, Y) && !ellipse(27256.893921, 28711.794220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25218.832367, 28293.449219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.646881, 26145.912842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.504000, 26230.928000, 335.454410, 335.454410, 0.000000, X, Y) && !ellipse(27967.709000, 25895.470800, 509.835215, 509.835215, 0.000000, X, Y) && !ellipse(22693.772064, 23738.783630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29927.733917, 23278.061707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22626.557343, 23387.618835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30251.105865, 16399.385254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27367.847595, 22588.577148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.195400, 22056.993200, 371.510411, 371.510411, 0.000000, X, Y) && !ellipse(28871.796906, 18566.162628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30460.083221, 17581.716263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.371063, 28525.081940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.621000, 28520.015600, 364.361610, 364.361610, 0.000000, X, Y) && !ellipse(27217.336800, 25474.108800, 1116.960032, 517.854415, 131.795000, X, Y) && !ellipse(33446.178741, 20299.452042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33486.102417, 18799.750778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32679.714264, 15031.524780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28897.364838, 25549.237488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24390.903961, 24930.172272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33717.356840, 24078.956000, 389.335211, 389.335211, 0.000000, X, Y) && !ellipse(24096.583344, 23257.068390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29924.433716, 21647.326782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33354.258972, 19728.377808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24270.219604, 18662.526917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32825.799286, 13603.827911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30095.391052, 28324.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29639.894226, 28348.634003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.853699, 27690.247803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38955.027344, 27204.682770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36970.177887, 26960.826294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38179.695068, 26921.656647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29414.333557, 26503.866547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23942.477478, 25972.473053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33298.397600, 25797.905200, 454.155213, 275.749608, 89.812000, X, Y) && !ellipse(24528.997345, 25784.714691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22565.427948, 25620.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.292206, 25368.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28562.626709, 24663.532990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26371.606262, 24670.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.593445, 24466.821869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23704.379761, 24295.803467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25310.040588, 24242.652435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28638.990662, 24167.161987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22323.740631, 24410.367981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33088.047150, 23873.372375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.584106, 23960.120148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.357819, 23960.491852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.388489, 23895.974640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.159058, 23985.480988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24442.000000, 23379.345764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36161.771912, 23236.460052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33157.006226, 23081.018707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33687.534180, 22845.398132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24932.248505, 22480.844025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33396.452698, 22397.138916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32942.474548, 22336.792755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24985.943817, 22054.932190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38523.683319, 21787.597290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32194.701477, 21601.478409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26244.746307, 21313.355957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33117.778168, 21094.638626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34631.574982, 21106.092422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33655.461426, 21089.085632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32497.847412, 20987.143127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32956.477173, 20557.166443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34013.016876, 20652.890869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32194.146576, 20430.297195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35254.415649, 19787.426987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27075.876678, 17283.212646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31057.369232, 19692.525620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25573.135406, 19578.117752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22482.498108, 19088.996307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.444427, 18832.977142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32375.479767, 18573.117477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25604.239075, 17985.579407, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 01:41:13 2012] Writing fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src36.gif
[Tue May 22 03:50:00 2012] Mean detx,y = (4247.54, 7063.05) 
[Tue May 22 03:50:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 03:53:29 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 03:53:30 2012] Setting source spectrum file to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue May 22 03:53:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed May 23 07:42:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 07:42:06 2012] rmf not generated due to insufficient counts
[Thu May 24 23:03:20 2012] Updating aperture counts using extracted products
[Thu May 24 23:03:20 2012] Error reading totcts from fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu May 24 23:03:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:03:24 2012] Using photon index=1.80, rate=0.0578, arf fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src36.arf
[Thu May 24 23:03:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:03:24 2012] Updating source flux to 2e-13
[Thu May 24 23:24:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting