[Sun May 20 02:29:09 2012] Detection parameters:
  Position = (233.4, 324.2) = 17 46 7.50 -28 59 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1974.1 +/- 65.7
  Background counts = 780.2
  Rate = 0.03 +/- 0.0008

[Sun May 20 02:29:15 2012] Off-axis axis estimate = 5.07'
[Sun May 20 02:45:35 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:45:35 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Sun May 20 02:45:35 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Sun May 20 02:45:35 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.97"
[Sun May 20 11:20:59 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src21.ximg exists
[Sun May 20 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src21.csv
[Sun May 20 11:20:59 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun May 20 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src21.csv
[Sun May 20 11:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:21:02 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun May 20 11:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun May 20 11:21:02 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun May 20 11:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun May 20 11:21:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 00:16:37 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.706328 pixels away
[Mon May 21 00:16:39 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:16:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:16:39 2012] Assessing source extent using major
[Mon May 21 00:16:39 2012] Source does appear to be extended
[Mon May 21 00:16:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:18:31 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Mon May 21 00:18:31 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Mon May 21 00:18:31 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Mon May 21 00:18:31 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.97"
[Mon May 21 11:25:28 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src21.ximg exists
[Mon May 21 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src21.csv
[Mon May 21 11:25:28 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon May 21 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src21.csv
[Mon May 21 11:25:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:25:31 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon May 21 11:25:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon May 21 11:25:31 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon May 21 11:25:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon May 21 11:25:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 01:39:14 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.829028 pixels away
[Tue May 22 01:39:15 2012] Vigneting correction estimate = 1.000000
[Tue May 22 01:39:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 01:39:15 2012] Assessing source extent using major
[Tue May 22 01:39:15 2012] Source does appear to be extended
[Tue May 22 01:39:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 01:41:12 2012] Counts = 1974.089600, rescaling region sizes by 2.000000
[Tue May 22 01:41:12 2012] XMMSAS src. selection expression = ellipse(20253.630219, 28152.653015, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 22 01:41:12 2012] Writing source region out to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src26_src.reg
[Tue May 22 01:41:12 2012] Extracting stamp from image fullrun_pn_xmm0202670801_pi300-10000_cl_sm2.00.img.gz, (158, 249) - (308, 399)
[Tue May 22 01:41:12 2012] XMMSAS bgd. selection expression = annulus(20253.630219, 28152.653015, 4350.000000, 8700.000000, X, Y) && !ellipse(27432.196440, 27446.365800, 3520.992101, 3520.992101, 0.000000, X, Y) && !ellipse(26948.088000, 27606.520800, 3473.112100, 3473.112100, 0.000000, X, Y) && !ellipse(11945.853000, 35348.823960, 545.056816, 545.056816, 0.000000, X, Y) && !ellipse(18093.332443, 37428.303192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16493.338000, 36527.144000, 653.912019, 653.912019, 0.000000, X, Y) && !ellipse(17919.872742, 36321.955139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15833.155121, 36139.713928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15488.723480, 35285.123718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15127.125748, 35266.594269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.994690, 32830.060608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21923.058212, 32140.645081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28532.563812, 32027.830231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20358.140137, 31614.659882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28531.000000, 30482.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27069.770400, 30078.344400, 440.484813, 440.484813, 0.000000, X, Y) && !ellipse(26063.298950, 29783.690613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25984.760529, 29093.515747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27256.893921, 28711.794220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25218.832367, 28293.449219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.646881, 26145.912842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.504000, 26230.928000, 335.454410, 335.454410, 0.000000, X, Y) && !ellipse(27967.709000, 25895.470800, 509.835215, 509.835215, 0.000000, X, Y) && !ellipse(22693.772064, 23738.783630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22626.557343, 23387.618835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27367.847595, 22588.577148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.195400, 22056.993200, 371.510411, 371.510411, 0.000000, X, Y) && !ellipse(24699.178000, 36785.750000, 348.876010, 348.876010, 0.000000, X, Y) && !ellipse(24365.160797, 36146.367432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25656.675903, 35473.022797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19255.600723, 35437.779938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12003.408112, 34228.031769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16562.956299, 33786.898651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24380.188263, 31889.022644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.457581, 29359.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.371063, 28525.081940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.621000, 28520.015600, 364.361610, 364.361610, 0.000000, X, Y) && !ellipse(27217.336800, 25474.108800, 1116.960032, 517.854415, 131.795000, X, Y) && !ellipse(15325.307755, 36065.173981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17114.056747, 36147.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26530.005310, 35283.456360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15869.390961, 33714.472107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24966.700165, 32388.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.317276, 31645.410431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21721.881332, 31797.060394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24309.896362, 31452.843811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19565.724075, 30115.842743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28897.364838, 25549.237488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24390.903961, 24930.172272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24096.583344, 23257.068390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12286.013412, 19710.214752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24270.219604, 18662.526917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17185.548721, 37346.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13407.209717, 36775.662476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18726.017960, 36525.295868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15055.469162, 36428.557220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20028.530000, 36784.420000, 1790.336052, 1790.336052, 0.000000, X, Y) && !ellipse(17298.598000, 35680.484000, 1195.552034, 1195.552034, 0.000000, X, Y) && !ellipse(13050.328644, 35658.065063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28332.828613, 35099.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20280.418137, 35311.443024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16732.511780, 34923.713165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24622.913600, 34578.289400, 344.293610, 344.293610, 0.000000, X, Y) && !ellipse(19654.771103, 34487.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15881.414261, 34331.370819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22736.630000, 33545.479600, 1571.784045, 1571.784045, 0.000000, X, Y) && !ellipse(16474.648697, 33292.510956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23726.402800, 32622.630000, 778.881622, 778.881622, 0.000000, X, Y) && !ellipse(23391.304800, 32180.857200, 1475.536042, 317.221609, 132.789000, X, Y) && !ellipse(18964.321442, 31443.981323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18385.943222, 30483.930695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17723.721832, 30395.045624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.943817, 30006.012146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.309219, 30151.497131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29350.498688, 29514.396301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29639.894226, 28348.634003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.853699, 27690.247803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29414.333557, 26503.866547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23942.477478, 25972.473053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.997345, 25784.714691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22565.427948, 25620.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18555.631454, 25126.243530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17111.165421, 25279.090912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.292206, 25368.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28562.626709, 24663.532990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26371.606262, 24670.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.593445, 24466.821869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23704.379761, 24295.803467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25310.040588, 24242.652435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14513.965317, 24180.591125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28638.990662, 24167.161987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22323.740631, 24410.367981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.584106, 23960.120148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.357819, 23960.491852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.388489, 23895.974640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24442.000000, 23379.345764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24932.248505, 22480.844025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24985.943817, 22054.932190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26244.746307, 21313.355957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20031.047165, 20305.137787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25573.135406, 19578.117752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22482.498108, 19088.996307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.444427, 18832.977142, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 01:41:12 2012] Writing fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src26.gif
[Tue May 22 03:19:57 2012] Mean detx,y = (-6935.45, 239.44) 
[Tue May 22 03:20:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 03:22:30 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 03:22:31 2012] Setting source spectrum file to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 22 03:22:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed May 23 07:23:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 07:23:42 2012] rmf not generated due to insufficient counts
[Thu May 24 23:03:20 2012] Updating aperture counts using extracted products
[Thu May 24 23:03:20 2012] Error reading totcts from fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu May 24 23:03:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:03:24 2012] Using photon index=1.80, rate=0.025, arf fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src26.arf
[Thu May 24 23:03:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:03:24 2012] Updating source flux to 8.9e-14
[Thu May 24 23:24:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting