[Sun May 20 02:29:09 2012] Detection parameters:
  Position = (290.4, 325.8) = 17 45 48.57 -28 59 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1347.3 +/- 152.9
  Background counts = 1118.9
  Rate = 0.01 +/- 0.001

[Sun May 20 02:29:15 2012] Off-axis axis estimate = 2.06'
[Sun May 20 02:45:35 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:45:35 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Sun May 20 02:45:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 0, frac = 0.000
[Sun May 20 02:45:35 2012] Skipping simple spatial due to low active detector fraction
[Mon May 21 00:16:39 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:16:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:16:39 2012] Assessing source extent using major
[Mon May 21 00:16:39 2012] Source does appear to be extended
[Mon May 21 00:16:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:18:31 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Mon May 21 00:18:31 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Mon May 21 00:18:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 0, frac = 0.000
[Mon May 21 00:18:31 2012] Skipping simple spatial due to low active detector fraction
[Tue May 22 01:39:15 2012] Vigneting correction estimate = 1.000000
[Tue May 22 01:39:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 01:39:15 2012] Assessing source extent using major
[Tue May 22 01:39:15 2012] Source does appear to be extended
[Tue May 22 01:39:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 01:41:12 2012] Counts = 1347.330444, rescaling region sizes by 2.000000
[Tue May 22 01:41:12 2012] XMMSAS src. selection expression = ellipse(25218.832367, 28293.449219, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 22 01:41:12 2012] Writing source region out to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src25_src.reg
[Tue May 22 01:41:12 2012] Extracting stamp from image fullrun_pn_xmm0202670801_pi300-10000_cl_sm2.00.img.gz, (215, 251) - (365, 401)
[Tue May 22 01:41:12 2012] XMMSAS bgd. selection expression = annulus(25218.832367, 28293.449219, 4350.000000, 8700.000000, X, Y) && !ellipse(27432.196440, 27446.365800, 3520.992101, 3520.992101, 0.000000, X, Y) && !ellipse(26948.088000, 27606.520800, 3473.112100, 3473.112100, 0.000000, X, Y) && !ellipse(18093.332443, 37428.303192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16231.420000, 37207.375800, 338.558410, 338.558410, 0.000000, X, Y) && !ellipse(16493.338000, 36527.144000, 653.912019, 653.912019, 0.000000, X, Y) && !ellipse(17919.872742, 36321.955139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15833.155121, 36139.713928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.994690, 32830.060608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21923.058212, 32140.645081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28532.563812, 32027.830231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20358.140137, 31614.659882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28531.000000, 30482.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27069.770400, 30078.344400, 440.484813, 440.484813, 0.000000, X, Y) && !ellipse(26063.298950, 29783.690613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25984.760529, 29093.515747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27256.893921, 28711.794220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20253.630219, 28152.653015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.646881, 26145.912842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.504000, 26230.928000, 335.454410, 335.454410, 0.000000, X, Y) && !ellipse(27967.709000, 25895.470800, 509.835215, 509.835215, 0.000000, X, Y) && !ellipse(22693.772064, 23738.783630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29927.733917, 23278.061707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22626.557343, 23387.618835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27367.847595, 22588.577148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.195400, 22056.993200, 371.510411, 371.510411, 0.000000, X, Y) && !ellipse(30086.807343, 19508.763077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.178000, 36785.750000, 348.876010, 348.876010, 0.000000, X, Y) && !ellipse(24365.160797, 36146.367432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25656.675903, 35473.022797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19255.600723, 35437.779938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16562.956299, 33786.898651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24380.188263, 31889.022644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32598.313721, 31335.547272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.457581, 29359.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.371063, 28525.081940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.621000, 28520.015600, 364.361610, 364.361610, 0.000000, X, Y) && !ellipse(27217.336800, 25474.108800, 1116.960032, 517.854415, 131.795000, X, Y) && !ellipse(33446.178741, 20299.452042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33486.102417, 18799.750778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17114.056747, 36147.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26530.005310, 35283.456360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15869.390961, 33714.472107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24966.700165, 32388.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.317276, 31645.410431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21721.881332, 31797.060394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24309.896362, 31452.843811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19565.724075, 30115.842743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28897.364838, 25549.237488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24390.903961, 24930.172272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33717.356840, 24078.956000, 389.335211, 389.335211, 0.000000, X, Y) && !ellipse(24096.583344, 23257.068390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29924.433716, 21647.326782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33354.258972, 19728.377808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17185.548721, 37346.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18726.017960, 36525.295868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20028.530000, 36784.420000, 1790.336052, 1790.336052, 0.000000, X, Y) && !ellipse(17298.598000, 35680.484000, 1195.552034, 1195.552034, 0.000000, X, Y) && !ellipse(28332.828613, 35099.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20280.418137, 35311.443024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16732.511780, 34923.713165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24622.913600, 34578.289400, 344.293610, 344.293610, 0.000000, X, Y) && !ellipse(19654.771103, 34487.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15881.414261, 34331.370819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22736.630000, 33545.479600, 1571.784045, 1571.784045, 0.000000, X, Y) && !ellipse(16474.648697, 33292.510956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23726.402800, 32622.630000, 778.881622, 778.881622, 0.000000, X, Y) && !ellipse(34559.745819, 32296.431580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23391.304800, 32180.857200, 1475.536042, 317.221609, 132.789000, X, Y) && !ellipse(18964.321442, 31443.981323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18385.943222, 30483.930695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17723.721832, 30395.045624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30476.371826, 30153.257416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.943817, 30006.012146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.309219, 30151.497131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29350.498688, 29514.396301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30095.391052, 28324.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29639.894226, 28348.634003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.853699, 27690.247803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29414.333557, 26503.866547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23942.477478, 25972.473053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33298.397600, 25797.905200, 454.155213, 275.749608, 89.812000, X, Y) && !ellipse(24528.997345, 25784.714691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22565.427948, 25620.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18555.631454, 25126.243530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17111.165421, 25279.090912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.292206, 25368.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28562.626709, 24663.532990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26371.606262, 24670.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.593445, 24466.821869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23704.379761, 24295.803467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25310.040588, 24242.652435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28638.990662, 24167.161987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22323.740631, 24410.367981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33088.047150, 23873.372375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.584106, 23960.120148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.357819, 23960.491852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.388489, 23895.974640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.159058, 23985.480988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24442.000000, 23379.345764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33157.006226, 23081.018707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33687.534180, 22845.398132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24932.248505, 22480.844025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33396.452698, 22397.138916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32942.474548, 22336.792755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24985.943817, 22054.932190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32194.701477, 21601.478409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26244.746307, 21313.355957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33117.778168, 21094.638626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34631.574982, 21106.092422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33655.461426, 21089.085632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32497.847412, 20987.143127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32956.477173, 20557.166443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34013.016876, 20652.890869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32194.146576, 20430.297195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20031.047165, 20305.137787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31057.369232, 19692.525620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25573.135406, 19578.117752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22482.498108, 19088.996307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.444427, 18832.977142, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 01:41:12 2012] Writing fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src25.gif
[Tue May 22 03:15:21 2012] Mean detx,y = (-1668.60, -634.68) 
[Tue May 22 03:15:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 03:18:00 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 03:18:00 2012] Setting source spectrum file to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue May 22 03:18:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed May 23 07:22:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 07:22:36 2012] rmf not generated due to insufficient counts
[Thu May 24 23:03:20 2012] Updating aperture counts using extracted products
[Thu May 24 23:03:20 2012] Error reading totcts from fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu May 24 23:03:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:03:24 2012] Using photon index=1.80, rate=0.0103, arf fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src25.arf
[Thu May 24 23:03:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:03:24 2012] Updating source flux to 4.4e-13
[Thu May 24 23:24:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting