[Sun May 20 02:29:09 2012] Detection parameters:
  Position = (454.8, 340.0) = 17 44 54.07 -28 58 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1297.0 +/- 51.4
  Background counts = 355.4
  Rate = 0.01 +/- 0.0004

[Sun May 20 02:29:15 2012] Off-axis axis estimate = 11.73'
[Sun May 20 02:45:35 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:45:35 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Sun May 20 02:45:35 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.813
[Sun May 20 02:45:35 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.29"
[Sun May 20 11:20:59 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src18.ximg exists
[Sun May 20 11:20:59 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src18.csv
[Sun May 20 11:20:59 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun May 20 11:20:59 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src18.csv
[Sun May 20 11:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:21:01 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun May 20 11:21:01 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun May 20 11:21:01 2012] Fit fullrun_pn_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Mon May 21 00:16:37 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.424819 pixels away
[Mon May 21 00:16:39 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:16:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:16:39 2012] Assessing source extent using major
[Mon May 21 00:16:39 2012] Source does appear to be extended
[Mon May 21 00:16:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:18:31 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Mon May 21 00:18:31 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Mon May 21 00:18:31 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.813
[Mon May 21 00:18:31 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 12.29"
[Mon May 21 11:25:28 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src18.ximg exists
[Mon May 21 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src18.csv
[Mon May 21 11:25:28 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon May 21 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src18.csv
[Mon May 21 11:25:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:25:31 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon May 21 11:25:31 2012] fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon May 21 11:25:31 2012] Fit fullrun_pn_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue May 22 01:39:14 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.445878 pixels away
[Tue May 22 01:39:15 2012] Vigneting correction estimate = 1.000000
[Tue May 22 01:39:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 01:39:15 2012] Assessing source extent using major
[Tue May 22 01:39:15 2012] Source does appear to be extended
[Tue May 22 01:39:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 01:41:11 2012] Counts = 1297.002563, rescaling region sizes by 2.000000
[Tue May 22 01:41:11 2012] XMMSAS src. selection expression = ellipse(39521.491119, 29535.825043, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 22 01:41:11 2012] Writing source region out to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src22_src.reg
[Tue May 22 01:41:11 2012] Extracting stamp from image fullrun_pn_xmm0202670801_pi300-10000_cl_sm2.00.img.gz, (380, 265) - (530, 415)
[Tue May 22 01:41:11 2012] XMMSAS bgd. selection expression = annulus(39521.491119, 29535.825043, 4350.000000, 8700.000000, X, Y) && !ellipse(27432.196440, 27446.365800, 3520.992101, 3520.992101, 0.000000, X, Y) && !ellipse(37866.234344, 38142.147644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32598.313721, 31335.547272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33446.178741, 20299.452042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33717.356840, 24078.956000, 389.335211, 389.335211, 0.000000, X, Y) && !ellipse(36310.126200, 37896.841000, 1309.032038, 1309.032038, 0.000000, X, Y) && !ellipse(34559.745819, 32296.431580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30476.371826, 30153.257416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30095.391052, 28324.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38955.027344, 27204.682770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36970.177887, 26960.826294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38179.695068, 26921.656647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33298.397600, 25797.905200, 454.155213, 275.749608, 89.812000, X, Y) && !ellipse(33088.047150, 23873.372375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.159058, 23985.480988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36161.771912, 23236.460052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33157.006226, 23081.018707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33687.534180, 22845.398132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33396.452698, 22397.138916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32942.474548, 22336.792755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38523.683319, 21787.597290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32194.701477, 21601.478409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33117.778168, 21094.638626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34631.574982, 21106.092422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33655.461426, 21089.085632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32497.847412, 20987.143127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32956.477173, 20557.166443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34013.016876, 20652.890869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32194.146576, 20430.297195, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 01:41:11 2012] Writing fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src22.gif
[Tue May 22 03:01:49 2012] Mean detx,y = (11665.32, -4432.31) 
[Tue May 22 03:01:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 03:04:18 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 03:04:19 2012] Setting source spectrum file to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue May 22 03:04:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed May 23 06:40:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 06:40:46 2012] rmf not generated due to insufficient counts
[Thu May 24 23:03:20 2012] Updating aperture counts using extracted products
[Thu May 24 23:03:20 2012] Error reading totcts from fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu May 24 23:03:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:03:24 2012] Using photon index=1.80, rate=0.0099, arf fullrun_pn_xmm0202670801_pi300-10000_pass1_cl_src22.arf
[Thu May 24 23:03:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:03:24 2012] Updating source flux to 4.4e-14
[Thu May 24 23:24:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting