[Sun May 20 02:30:20 2012] Detection parameters:
  Position = (270.7, 125.1) = 17 45 55.12 -29 14 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 390.3 +/- 29.5
  Background counts = 118.4
  Rate = 0.003 +/- 0.0002

[Sun May 20 02:30:24 2012] Off-axis axis estimate = 12.73'
[Sun May 20 11:21:03 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Sun May 20 11:21:03 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Sun May 20 11:21:03 2012] source mask rpix=2.9, npix_max = 47, mask sum = 40, frac = 0.845
[Sun May 20 11:21:03 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 12.79"
[Sun May 20 17:51:46 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src42.ximg exists
[Sun May 20 17:51:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src42.csv
[Sun May 20 17:51:46 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun May 20 17:51:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src42.csv
[Sun May 20 17:51:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:51:50 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun May 20 17:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun May 20 17:51:50 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun May 20 17:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun May 20 17:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 00:17:06 2012] Warning, spatial fit 42 centroid is now closest to src. 150
[Mon May 21 00:17:07 2012] Spatial fit model total counts = 1947.250000, observed total counts = 1949.000000
[Mon May 21 00:17:07 2012] Offset between fit and detection position for source 6 = 1.104771 pixels
[Mon May 21 00:17:07 2012] Warning, changing simple spatial fit ID from 42 to 55
[Mon May 21 00:17:07 2012] 1995.386100 total counts/ 1910.710000 bgd. counts: snr = 1.937151
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.104771 pixels
  Position = (269.7, 124.8) = 17 45 55.48 -29 14 19.4
  Extent = 11.9" x 4.3", rotation angle = 2
  Source counts = 84.7 +/- 44.7
  Background counts = 1910.7
  Rate = 0.0007 +/- 0.0004
[Mon May 21 00:17:07 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:17:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:17:07 2012] Assessing source extent using major
[Mon May 21 00:17:07 2012] Source does appear to be extended
[Mon May 21 00:17:07 2012] Computing asymmetry using major and minor axis, asym = 2.74
[Mon May 21 00:17:07 2012] Source is asymmetric
[Mon May 21 00:17:07 2012] Deleting source due to low Poisson probability 0.9