[Sun May 20 02:30:21 2012] Detection parameters:
  Position = (354.0, 346.7) = 17 45 27.50 -28 58 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 278.4 +/- 30.1
  Background counts = 393.4
  Rate = 0.003 +/- 0.0003

[Sun May 20 02:30:24 2012] Off-axis axis estimate = 5.33'
[Sun May 20 11:21:03 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Sun May 20 11:21:03 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Sun May 20 11:21:03 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.117
[Sun May 20 11:21:03 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 9.10"
[Sun May 20 17:51:46 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src40.ximg exists
[Sun May 20 17:51:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src40.csv
[Sun May 20 17:51:46 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src40_1.ximg exists
[Sun May 20 17:51:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src40.csv
[Sun May 20 17:51:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:51:49 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sun May 20 17:51:50 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sun May 20 17:51:50 2012] Fit fullrun_mos1_xmm0202670801_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Mon May 21 00:17:06 2012] Spatial fit model total counts = 3862.430000, observed total counts = 3788.000000
[Mon May 21 00:17:06 2012] Offset between fit and detection position for source 57 = 3.379207 pixels
[Mon May 21 00:17:06 2012] 3689.459000 total counts/ 2847.870000 bgd. counts: snr = 15.770301
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 3.379207 pixels
  Position = (357.2, 345.5) = 17 45 26.45 -28 58 19.5
  Extent = 18.2 (18.2-36.4)", rotation angle = 0
  Source counts = 841.6 +/- 60.7
  Background counts = 2847.9
  Rate = 0.007 +/- 0.0005
[Mon May 21 00:17:07 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:17:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:17:07 2012] Assessing source extent using major axis lower bound
[Mon May 21 00:17:07 2012] Source does appear to be extended
[Mon May 21 00:17:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:17:07 2012] Source is confused with source 61
[Mon May 21 11:25:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 21 11:25:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 21 11:25:33 2012] Initial guess for spatial extent in simple fitting = 18.19"
[Mon May 21 11:25:33 2012] source mask rpix=4.2, npix_max = 87, mask sum = 80, frac = 0.912
[Mon May 21 11:25:33 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 18.19"
[Mon May 21 19:23:48 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass1_src37.ximg exists
[Mon May 21 19:23:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670801_pi300-10000_cl_pass1_src37.csv
[Mon May 21 19:23:48 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon May 21 19:23:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670801_pi300-10000_cl_pass1_src37.csv
[Mon May 21 19:23:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670801_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670801_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 19:23:52 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon May 21 19:23:52 2012] fullrun_mos1_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon May 21 19:23:52 2012] Fit fullrun_mos1_xmm0202670801_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Tue May 22 01:39:48 2012] Warning, spatial fit 37 centroid is now closest to src. 66
[Tue May 22 01:39:49 2012] Vigneting correction estimate = 1.000000
[Tue May 22 01:39:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 01:39:49 2012] Assessing source extent using major axis lower bound
[Tue May 22 01:39:49 2012] Source does appear to be extended
[Tue May 22 01:39:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 10:39:05 2012] XMMSAS src. selection expression = ellipse(31025.448000, 30010.610800, 1091.442031, 1091.442031, 0.000000, X, Y)
[Wed May 23 10:39:05 2012] Writing source region out to fullrun_mos1_xmm0202670801_pi300-10000_pass1_cl_src57_src.reg
[Wed May 23 10:39:05 2012] Extracting stamp from image fullrun_mos1_xmm0202670801_pi300-10000_cl_sm2.00.img.gz, (294, 283) - (420, 408)
[Wed May 23 10:39:05 2012] XMMSAS bgd. selection expression = annulus(31025.448000, 30010.610800, 1819.070052, 3638.140105, X, Y) && !ellipse(27423.639200, 27430.031800, 2679.264077, 2679.264077, 0.000000, X, Y) && !ellipse(26293.161800, 27907.399800, 1154.432033, 1154.432033, 0.000000, X, Y) && !ellipse(28622.552000, 26293.112000, 325.122409, 325.122409, 0.000000, X, Y) && !ellipse(27084.675000, 30080.510200, 343.562410, 343.562410, 0.000000, X, Y) && !ellipse(28489.575100, 32006.976000, 341.880010, 341.880010, 0.000000, X, Y) && !ellipse(29223.844000, 29090.838000, 1286.712037, 1286.712037, 0.000000, X, Y) && !ellipse(29046.710236, 28898.527740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.606354, 29137.490997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27963.591034, 25969.555176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26924.202820, 29380.059784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.538400, 29579.248000, 1284.072037, 1284.072037, 0.000000, X, Y) && !ellipse(32560.520700, 31317.368000, 360.667210, 360.667210, 0.000000, X, Y) && !ellipse(27242.981567, 25886.370453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28847.216644, 28444.995636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28875.351990, 25605.024963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29325.559998, 28342.113251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30091.111145, 28251.927216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29360.550629, 26480.080139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29954.596000, 26783.496000, 1261.304036, 1261.304036, 0.000000, X, Y) && !ellipse(29413.969818, 27352.761719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30537.838000, 27890.797360, 1345.480039, 1345.480039, 0.000000, X, Y) && !ellipse(29439.999725, 27703.273376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33273.997437, 25723.030396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34512.741180, 32154.767181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30411.169617, 27224.128204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29608.038000, 29184.027800, 1316.888038, 1316.888038, 0.000000, X, Y)
[Wed May 23 10:39:05 2012] Writing fullrun_mos1_xmm0202670801_pi300-10000_pass1_cl_src57.gif
[Wed May 23 11:35:42 2012] Mean detx,y = (3409.16, 2843.61) 
[Wed May 23 11:35:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 11:36:49 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 11:36:49 2012] Setting source spectrum file to fullrun_mos1_xmm0202670801_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Wed May 23 11:36:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202670801_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Thu May 24 23:03:29 2012] Updating aperture counts using extracted products
[Thu May 24 23:03:29 2012] Error reading totcts from fullrun_mos1_xmm0202670801_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu May 24 23:03:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:03:35 2012] Using photon index=1.80, rate=0.0066, arf fullrun_mos1_xmm0202670801_pi300-10000_pass1_cl_src57.arf
[Thu May 24 23:03:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:03:35 2012] Updating source flux to 6.6e-14
[Thu May 24 23:03:47 2012] Flag c found in src. 57 procflags, skipping spectral fitting