[Sat May  4 21:55:48 2013] Detection parameters:
  Position = (305.3, 291.1) = 17 45 43.41 -29 2 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.0 +/- 37.5
  Background counts = 499.3
  Rate = 0.002 +/- 0.0003

[Sat May  4 21:55:51 2013] Off-axis axis estimate = 0.73'
[Sat May  4 21:56:54 2013] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Sat May  4 21:56:54 2013] Initial guess for spatial extent in simple fitting = 6.79"
[Sat May  4 21:56:54 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.941
[Sat May  4 21:56:54 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 6.79"
[Sat May  4 21:56:55 2013] fullrun_mos2_xmm0202670701_pi300-10000_cl_pass0_src47.ximg exists
[Sat May  4 21:56:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670701_pi300-10000_cl_pass0_src47.csv
[Sat May  4 21:56:55 2013] fullrun_mos2_xmm0202670701_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat May  4 21:56:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670701_pi300-10000_cl_pass0_src47.csv
[Sat May  4 21:56:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202670701_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202670701_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 21:56:57 2013] fullrun_mos2_xmm0202670701_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat May  4 21:56:57 2013] fullrun_mos2_xmm0202670701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat May  4 21:56:57 2013] Fit fullrun_mos2_xmm0202670701_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sat May  4 21:57:40 2013] Spatial fit model total counts = 5933.400000, observed total counts = 5443.000000
[Sat May  4 21:57:40 2013] Offset between fit and detection position for source 80 = 0.998255 pixels
[Sat May  4 21:57:40 2013] Warning, changing simple spatial fit ID from 47 to 26
[Sat May  4 21:57:40 2013] 6098.121000 total counts/ 5708.580000 bgd. counts: snr = 5.155718
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.998255 pixels
  Position = (305.7, 290.2) = 17 45 43.28 -29 2 16.1
  Extent = 13.9 (13.9-27.9)", rotation angle = 0
  Source counts = 389.5 +/- 78.1
  Background counts = 5708.6
  Rate = 0.003 +/- 0.0007
[Sat May  4 21:57:40 2013] Spatial fit model total counts = 5179.000000, observed total counts = 5179.000000
[Sat May  4 21:57:40 2013] Offset between fit and detection position for source 80 = 0.825427 pixels
[Sat May  4 21:57:40 2013] Warning, changing simple spatial fit ID from 26 to 47
[Sat May  4 21:57:40 2013] 5133.555000 total counts/ 5007.830000 bgd. counts: snr = 1.776629
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.825427 pixels
  Position = (305.3, 290.9) = 17 45 43.41 -29 2 12.9
  Extent = 5.8 (2.8-11.6)", rotation angle = 0
  Source counts = 125.7 +/- 71.6
  Background counts = 5007.8
  Rate = 0.001 +/- 0.0006
[Sat May  4 21:57:40 2013] Vigneting correction estimate = 1.000000
[Sat May  4 21:57:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 21:57:40 2013] Assessing source extent using major axis lower bound
[Sat May  4 21:57:40 2013] Source does appear to be extended
[Sat May  4 21:57:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 21:57:40 2013] Source is confused with source 79
[Sat May  4 21:58:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May  4 21:58:15 2013] Initial guess for spatial extent in simple fitting = 5.77"
[Sat May  4 21:58:15 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.199
[Sat May  4 21:58:15 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 5.77"
[Sat May  4 21:58:16 2013] fullrun_mos2_xmm0202670701_pi300-10000_cl_pass1_src45.ximg exists
[Sat May  4 21:58:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670701_pi300-10000_cl_pass1_src45.csv
[Sat May  4 21:58:16 2013] fullrun_mos2_xmm0202670701_pi300-10000_cl_pass1_src45_1.ximg exists
[Sat May  4 21:58:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670701_pi300-10000_cl_pass1_src45.csv
[Sat May  4 21:58:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202670701_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202670701_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 21:58:17 2013] fullrun_mos2_xmm0202670701_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sat May  4 21:58:17 2013] fullrun_mos2_xmm0202670701_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sat May  4 21:58:17 2013] Fit fullrun_mos2_xmm0202670701_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sat May  4 21:58:59 2013] Spatial fit model total counts = 5934.500000, observed total counts = 5443.000000
[Sat May  4 21:58:59 2013] Offset between fit and detection position for source 80 = 0.809733 pixels
[Sat May  4 21:58:59 2013] Warning, changing simple spatial fit ID from 45 to 26
[Sat May  4 21:58:59 2013] 6100.214000 total counts/ 5707.750000 bgd. counts: snr = 5.194782
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.809733 pixels
  Position = (305.7, 290.2) = 17 45 43.30 -29 2 16.1
  Extent = 13.9 (13.9-27.9)", rotation angle = 0
  Source counts = 392.5 +/- 78.1
  Background counts = 5707.8
  Rate = 0.003 +/- 0.0007
[Sat May  4 21:58:59 2013] Vigneting correction estimate = 1.000000
[Sat May  4 21:58:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 21:58:59 2013] Assessing source extent using major axis lower bound
[Sat May  4 21:58:59 2013] Source does appear to be extended
[Sat May  4 21:58:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 02:10:48 2013] XMMSAS src. selection expression = ellipse(26543.132000, 25198.540000, 835.854024, 835.854024, 0.000000, X, Y)
[Sun May  5 02:10:48 2013] Writing source region out to fullrun_mos2_xmm0202670701_pi300-10000_pass1_cl_src80_src.reg
[Sun May  5 02:10:48 2013] Extracting stamp from image fullrun_mos2_xmm0202670701_pi300-10000_cl_sm2.00.img.gz, (258, 242) - (354, 338)
[Sun May  5 02:10:48 2013] XMMSAS bgd. selection expression = annulus(26543.132000, 25198.540000, 1393.090040, 2786.180080, X, Y) && !ellipse(27357.704600, 27359.240000, 2369.268068, 2369.268068, 0.000000, X, Y) && !ellipse(26286.789400, 28072.829200, 1173.256034, 823.688024, 61.454000, X, Y) && !ellipse(26199.582000, 27852.924200, 1166.160034, 1166.160034, 0.000000, X, Y) && !ellipse(28262.023600, 27340.227180, 1208.104035, 556.732016, 94.816000, X, Y) && !ellipse(28554.903000, 26242.230000, 334.330410, 334.330410, 0.000000, X, Y) && !ellipse(25471.590000, 28944.244000, 1996.944057, 1996.944057, 0.000000, X, Y) && !ellipse(27242.262054, 22549.208374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27889.409515, 25875.776886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.088000, 28636.486000, 1436.632041, 1436.632041, 0.000000, X, Y) && !ellipse(28004.335114, 28825.248932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28646.410000, 28317.024000, 2756.320079, 1605.400046, 328.626000, X, Y) && !ellipse(26948.088000, 25307.791200, 923.176027, 923.176027, 0.000000, X, Y) && !ellipse(28768.067566, 25533.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29829.720000, 28349.230400, 1364.880039, 1364.880039, 0.000000, X, Y) && !ellipse(29259.752441, 27526.137787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25069.542000, 24199.114000, 1165.280034, 1165.280034, 0.000000, X, Y) && !ellipse(29330.490387, 26491.783508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24230.944000, 24878.222000, 713.770421, 713.770421, 0.000000, X, Y) && !ellipse(29423.516000, 28808.344000, 1378.160040, 1378.160040, 0.000000, X, Y) && !ellipse(30313.216000, 27957.530000, 1359.112039, 1359.112039, 0.000000, X, Y) && !ellipse(24328.790400, 24866.012000, 1149.440033, 1149.440033, 0.000000, X, Y) && !ellipse(25656.482086, 23881.257812, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 02:10:48 2013] Writing fullrun_mos2_xmm0202670701_pi300-10000_pass1_cl_src80.gif
[Sun May  5 02:58:39 2013] Mean detx,y = (432.36, -2151.71) 
[Sun May  5 02:58:41 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 02:58:51 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 02:58:52 2013] Setting source spectrum file to fullrun_mos2_xmm0202670701_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sun May  5 02:58:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0202670701_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Sun May  5 07:16:52 2013] Updating aperture counts using extracted products
[Sun May  5 07:16:52 2013] Total counts from fullrun_mos2_xmm0202670701_pi300-10000_pass1_cl_src80_src_b10.pi.gz = 5705.00
[Sun May  5 07:16:53 2013] Total counts from fullrun_mos2_xmm0202670701_pi300-10000_pass1_cl_src80_bgd.pi.gz = 8365.00
[Sun May  5 07:16:53 2013] Got source and background scale factors 2193600.000000, 4815244.000000
[Sun May  5 07:16:53 2013] User source parameters:
  Position = (305.7, 290.2) = 17 45 43.30 -29 2 16.1
  Extent = 13.9 (13.9-27.9)", rotation angle = 0
  Source aperture counts = 1894.3 +/- 76.5
  Background aperture counts = 3810.7
  Rate = 0.02 +/- 0.0006

[Sun May  5 07:17:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 07:17:08 2013] Using photon index=1.80, rate=0.00332, arf fullrun_mos2_xmm0202670701_pi300-10000_pass1_cl_src80.arf
[Sun May  5 07:17:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 07:17:08 2013] Updating source flux to 5.9e-14
[Sun May  5 07:17:30 2013] Flag c found in src. 80 procflags, skipping spectral fitting
[Sun May  5 07:18:01 2013] xmm0202670701/analysis//spectral/fullrun_mos2_xmm0202670701_pi300-10000_pass1_cl_src80_pl.csv not found, spectral fit skipped or did not complete