[Sat May 4 21:55:44 2013] Detection parameters: Position = (236.5, 149.0) = 17 46 6.27 -29 12 29.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 213.2 +/- 28.4 Background counts = 190.1 Rate = 0.002 +/- 0.0002 [Sat May 4 21:55:44 2013] Off-axis axis estimate = 11.73' [Sat May 4 21:56:51 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting [Sat May 4 21:56:51 2013] Initial guess for spatial extent in simple fitting = 12.29" [Sat May 4 21:56:51 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949 [Sat May 4 21:56:51 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 12.29" [Sat May 4 21:56:53 2013] fullrun_mos1_xmm0202670701_pi300-10000_cl_pass0_src79.ximg exists [Sat May 4 21:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670701_pi300-10000_cl_pass0_src79.csv [Sat May 4 21:56:53 2013] fullrun_mos1_xmm0202670701_pi300-10000_cl_pass0_src79_1.ximg exists [Sat May 4 21:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670701_pi300-10000_cl_pass0_src79.csv [Sat May 4 21:56:53 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0202670701_pi300-10000_cl_pass0_src79_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0202670701_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 21:56:54 2013] fullrun_mos1_xmm0202670701_pi300-10000_cl_pass0_tfrozen_src79.ximg exists [Sat May 4 21:56:54 2013] fullrun_mos1_xmm0202670701_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists [Sat May 4 21:56:54 2013] Fit fullrun_mos1_xmm0202670701_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly [Sat May 4 21:57:27 2013] Warning, spatial fit 79 centroid is now closest to src. 115 [Sat May 4 21:57:27 2013] Vigneting correction estimate = 1.000000 [Sat May 4 21:57:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 21:57:27 2013] Assessing source extent using major [Sat May 4 21:57:27 2013] Source does appear to be extended [Sat May 4 21:57:27 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 21:58:12 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting [Sat May 4 21:58:12 2013] Initial guess for spatial extent in simple fitting = 12.29" [Sat May 4 21:58:12 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949 [Sat May 4 21:58:12 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 12.29" [Sat May 4 21:58:13 2013] fullrun_mos1_xmm0202670701_pi300-10000_cl_pass1_src72.ximg exists [Sat May 4 21:58:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670701_pi300-10000_cl_pass1_src72.csv [Sat May 4 21:58:13 2013] fullrun_mos1_xmm0202670701_pi300-10000_cl_pass1_src72_1.ximg exists [Sat May 4 21:58:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670701_pi300-10000_cl_pass1_src72.csv [Sat May 4 21:58:13 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0202670701_pi300-10000_cl_pass1_src72_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0202670701_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 21:58:14 2013] fullrun_mos1_xmm0202670701_pi300-10000_cl_pass1_tfrozen_src72.ximg exists [Sat May 4 21:58:14 2013] fullrun_mos1_xmm0202670701_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists [Sat May 4 21:58:14 2013] Fit fullrun_mos1_xmm0202670701_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly [Sat May 4 21:58:47 2013] Source 119 is offset by -4.772237 and 6.238241 pixels which is larger than 2 X fitted extent = 1.465972 x 1.465972, not incorporating fit results [Sat May 4 21:58:47 2013] Warning, spatial fit 72 centroid is now closest to src. 124 [Sat May 4 21:58:47 2013] Warning: source 83 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 119 at 33.677250 pixels away [Sat May 4 21:58:47 2013] Vigneting correction estimate = 1.000000 [Sat May 4 21:58:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 21:58:47 2013] Assessing source extent using major [Sat May 4 21:58:47 2013] Source does appear to be extended [Sat May 4 21:58:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 22:01:00 2013] XMMSAS src. selection expression = ellipse(20526.997345, 12911.544952, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 4 22:01:00 2013] Not overwriting source region fullrun_mos1_xmm0202670701_pi300-10000_pass1_cl_src119_src.reg [Sat May 4 22:01:00 2013] Extracting stamp from image fullrun_mos1_xmm0202670701_pi300-10000_cl_sm2.00.img.gz, (199, 111) - (274, 186) [Sat May 4 22:01:00 2013] XMMSAS bgd. selection expression = annulus(20526.997345, 12911.544952, 1087.500000, 2175.000000, X, Y) && !ellipse(23299.514000, 10951.474000, 1112.296032, 255.335207, 357.623000, X, Y) && !ellipse(22002.564392, 11247.510651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.282288, 11632.338562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23429.010000, 13972.118600, 1834.472053, 1834.472053, 0.000000, X, Y) && !ellipse(21915.905780, 12353.175400, 975.752028, 246.270407, 160.334300, X, Y) && !ellipse(22097.004000, 13749.129400, 1892.232054, 1892.232054, 0.000000, X, Y) && !ellipse(21970.269943, 11906.624329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23277.100586, 12197.120377, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 22:01:00 2013] Writing fullrun_mos1_xmm0202670701_pi300-10000_pass1_cl_src119.gif [Sat May 4 22:21:08 2013] Mean detx,y = (-15185.28, -4370.95) [Sat May 4 22:21:09 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 22:21:18 2013] Binned source spectrum to 10 counts/bin [Sat May 4 22:21:18 2013] Setting source spectrum file to fullrun_mos1_xmm0202670701_pi300-10000_pass1_cl_src119_src_b10.pi.gz [Sat May 4 22:21:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0202670701_pi300-10000_pass1_cl_src119_bgd.pi.gz [Sun May 5 01:57:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 5 01:57:43 2013] rmf not generated due to insufficient counts [Sun May 5 07:16:31 2013] Updating aperture counts using extracted products [Sun May 5 07:16:31 2013] Total counts from fullrun_mos1_xmm0202670701_pi300-10000_pass1_cl_src119_src_b10.pi.gz = 1142.00 [Sun May 5 07:16:31 2013] Total counts from fullrun_mos1_xmm0202670701_pi300-10000_pass1_cl_src119_bgd.pi.gz = 2868.00 [Sun May 5 07:16:32 2013] Got source and background scale factors 1329600.000000, 3991792.000000 [Sun May 5 07:16:32 2013] User source parameters: Position = (236.5, 149.0) = 17 46 6.27 -29 12 29.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 186.7 +/- 34.8 Background aperture counts = 955.3 Rate = 0.002 +/- 0.0003 [Sun May 5 07:16:32 2013] Updating counts from extracted products [Sun May 5 07:16:32 2013] Set source signif. to 186.72/30.91 = 6.04 [Sun May 5 07:16:40 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 07:16:40 2013] Using photon index=1.80, rate=0.00159, arf fullrun_mos1_xmm0202670701_pi300-10000_pass1_cl_src119.arf [Sun May 5 07:16:40 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 07:16:40 2013] Updating source flux to 7.8e-14 [Sun May 5 07:17:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 07:17:30 2013] xmm0202670701/analysis//spectral/fullrun_mos1_xmm0202670701_pi300-10000_pass1_cl_src119_pl.csv not found, spectral fit skipped or did not complete